How to check tire pressure on the Volkswagen New Sagitar?

1 Answers
DakotaMarie
07/29/25 10:41pm
You can check the tire pressure on the Volkswagen New Sagitar through the car's central control display and dashboard. The new Sagitar is equipped with a tire pressure monitoring system, which can monitor the tire pressure in real-time during driving, providing more comprehensive protection for driving safety. Below is an introduction to tire pressure: 1. Tire pressure, strictly speaking, refers to the air pressure inside the tire. 2. Nowadays, many tires are not filled with air, and for these tires, the tire pressure requirements are quite strict. For tires filled with air, the pressure is related to seasonal changes. Moreover, tire pressure is closely linked to the car's performance, such as comfort and load capacity, and also affects the lifespan of the tire. 3. Air pressure is the lifeblood of a tire; both too high and too low pressure will shorten the tire's service life. Low pressure increases the deformation of the tire body, easily causing cracks on the tire side, and generates flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, and breaking of the cords. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders.
Was this review help?
16
4
Share
More Forum Discussions

Will Running a Red Light at Night Definitely Be Captured?

If there are surveillance cameras, they will capture the violation. Whether a motor vehicle runs a red light while turning left or going straight, it constitutes illegal behavior. According to the relevant provisions of the Road Traffic Safety Law, vehicles must obey traffic signals, including traffic lights, traffic signs, road markings, and the directions of traffic police. If both the left-turn signal and the straight signal are green, proceeding straight from a left-turn lane violates the designated lane rules. When the left-turn signal is red, it will be penalized as running a red light. Based on the following points, you can avoid running a red light: First observe the arrow signal, then the circular signal: Currently, there are two types of traffic signals: arrow traffic lights and circular indicator traffic lights. When arrow signals are present, first check the arrow signal and then the circular signal to avoid running a red light. Note: When encountering a circular red light, you may turn right; when encountering an arrow signal where the right-turn arrow is red, you must not turn right, otherwise it will be penalized as running a red light. Brake promptly: When the red light turns on, ensure the front of your vehicle does not cross the stop line. If the front wheels accidentally cross and the rear wheels follow, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the signal turns red, do not proceed through the intersection; wait for the green light before continuing. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown and your vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to delayed braking. If your speed is slow and you are far from the intersection, brake immediately to stop and avoid running a red light. Article 38 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle signals or pedestrian crossing signals, non-motor vehicles and pedestrians must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the act as running a red light. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic signals, the evidence photos may be blurry. In such cases, mistakenly running a red light will not be penalized. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights is inevitable, and the 12-point penalty system would be insufficient. After delivering the patient, obtain proof from the hospital or the person assisted and verify it with the traffic police. If confirmed, the violation records can be expunged. If possible, calling an ambulance is advisable to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the gestures of the traffic police. The traffic police department states that according to the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, when the yellow light flashes at an intersection, vehicles that have already crossed the stop line may continue to proceed. If you rush through when the yellow light is already on, it will be considered running a red light if captured.
4
3
Share

Why Are Mid-Engine Configurations Prohibited in Vans?

Vans prohibit mid-engine configurations primarily due to safety concerns. A mid-engine layout means the engine is positioned between the front and rear axles, with the cabin typically located either in front of or behind the engine. Relevant details include: 1. Drivetrain: Mid-engine vehicles are rear-wheel drive or all-wheel drive; 2. Characteristics of Mid-Engine: Placing the heaviest component (the engine) at the vehicle's center achieves near-ideal weight distribution; 3. Drawbacks: This design narrows cabin space, limiting seating capacity, and places occupants closer to the engine, resulting in higher noise levels.
10
5
Share

Where is the car radiator filler port located?

The car radiator filler port is generally located on the right side of the engine compartment. Here is a detailed introduction about the car radiator: 1. Overview: Modern engines operate at higher temperatures than in the past. This is due to the addition of emission control systems. Additionally, the radiator, engine compartment, and grille area have all become somewhat smaller. The car radiator cooling system should be cleaned once a year to maximize the lifespan of the car radiator. 2. Other functions: The main job of the cooling system is to dissipate heat into the air to prevent engine overheating, but the cooling system also has other important functions. The engine in a car operates best at the proper high temperature.
9
5
Share

When Can You Take the Subject 4 Exam After Passing Subject 3?

According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the timing varies depending on the type of license. Taking a Class C license as an example: After passing the Subject 3 exam, you can take the Subject 4 exam directly on the same afternoon, within 9 days without an appointment, or after 10 days with an appointment. Same afternoon direct exam: Since Subject 4 is the theoretical part of Subject 3, most cities schedule both Subject 3 and Subject 4 together when making the appointment. Therefore, on the afternoon of passing the Subject 3 exam, you can directly go to the Subject 4 test center to take the exam. No appointment within 9 days: With the upgrade of driving test services, some cities have introduced a new model where candidates can take the Subject 4 exam within 9 days of passing Subject 3 without an appointment. Candidates can go to the Subject 4 test center with their ID card during this period. The test center staff will group candidates for waiting: one group for no-appointment candidates and another for appointment-based candidates, facilitating exam management. Appointment after 10 days: The success of a Subject 4 appointment depends on the current number of candidates, the priority of the candidate, and temporary arrangements at the test center. Candidates closer to their 3-year validity period have higher priority and are more likely to secure an appointment. Additionally, unforeseen events (e.g., pandemics) that lead to exam suspensions can also affect appointment success rates. Subject 4, also known as the Subject 4 theory test or driver's theory test, is part of the motor vehicle driver's license assessment. It includes safe and civilized driving requirements, knowledge of safe driving under adverse weather and complex road conditions, handling emergencies like tire blowouts, and post-accident procedures. Subject 4 Exam Notes: Exam duration: 45 minutes. Number of questions: 50 questions are selected proportionally from the Subject 4 question bank based on the license type, with each question worth 2 points. Question types: Single-choice questions (including true/false questions) and multiple-choice questions, covering animated questions, image-based questions, scenario recognition questions, and text-based questions. Retake notes: Failing Subject 4 only requires retaking Subject 4, which is scheduled by the driving school. There are no limits on retakes, and no fees are charged for retakes. Subject 4 Exam Tips: Focus on error-prone areas and identify the reasons for mistakes. For marked questions, don’t just memorize the correct answer. Refer to regulations, textbooks, or reference materials to understand and internalize the reasons for errors. Categorize and summarize questions. Refer to the question bank analysis for grouping and identifying similar questions: Many questions in the bank are similar and easily confused, requiring analysis. For example, traffic signs for walking, hiking, pedestrian attention, crosswalks, and crosswalk attention have similar patterns and can be confusing. Grouping them during study helps avoid mistakes. Use memory techniques: Many questions in the bank involve numbers. Summarizing these numbers can aid memory. The driving test consists of 3 subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 divided into two parts. Subject 4 is the colloquial term for the Subject 3 Safe and Civilized Driving Knowledge Test and is not a separate subject. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test. Subject 2 refers to the field driving skills test. Subject 3 refers to the road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3.
10
1
Share

Do You Need to Press the Clutch When Parking a Manual Transmission Car?

Manual transmission cars require pressing the clutch when parking. Below is a detailed introduction about manual transmission cars: 1. Overview: A manual transmission car refers to a vehicle that uses a manual shift mechanical transmission (also known as manual transmission, MT) to adjust the speed. That is, the gear shift lever must be manually moved to change the gear meshing position inside the transmission, thereby altering the gear ratio to achieve speed change. The gear shift lever can only be moved when the clutch is pressed. 2. Composition: Manual transmission cars achieve gear ratio changes by switching different gear sets. As a key link in power distribution, the transmission must have two major components: the power input shaft and the output shaft, plus the gears that make up the transmission, which are the most basic components of a manual transmission.
18
4
Share

What causes a car to fail to start after overheating and stalling?

When a car fails to start after stalling due to high water temperature, it is typically caused by fuel system malfunctions. Below are specific details about common fuel system issues in gasoline engines: 1. Overly rich air-fuel mixture: Symptoms include gasoline leakage around the valve stems; insufficient engine power with poor acceleration; excessive carbon buildup on spark plugs; and in severe cases, automatic engine stalling. 2. Location of occurrence: Overly rich mixture problems usually occur in the air filter and carburetor sections. 3. Common causes include: excessively dirty air filters with clogged mesh; choke valve not fully opened; improper cleaning of the main jet resulting in damage that increases fuel flow rate.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.