How to Check Tire Pressure on the Lingpai?

2 Answers
DelCaleb
07/29/25 12:21am
The Lingpai can be equipped with a tire pressure monitoring system to check tire pressure. Here is information about Lingpai tire maintenance: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should neither be too high nor too low; always inflate according to the vehicle's indicated pressure. In summer, try to keep the pressure slightly lower. In winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. This ensures a comfortable and safe drive. 2. Frequently inspect tire wear: Some vehicles may experience uneven tire wear, so regularly check the tires, especially the inner side, for abnormal wear. Pay attention to whether the tread depth is consistent on both sides. 3. Rotate tires on schedule: The front tires, being steering tires, wear out faster. To reduce front tire wear, perform a four-tire rotation every 5,000 km after the first maintenance, preferably using the diagonal rotation method. 4. Perform wheel alignment periodically: If the vehicle pulls to one side or exhibits abnormal steering, promptly align the tires to prevent further issues. Wheel alignment ensures even force distribution across all four tires, avoiding excessive wear. 5. Repair punctures promptly: If a tire is punctured by a nail, even if there's no air leakage, replace it with the spare tire as soon as possible and repair the punctured tire.
Was this review help?
20
3
Share
AlexaRose
08/12/25 4:36am
Having driven for decades, I find checking tire pressure quite important, especially when driving a family car like the Lingpai. First, it's best to check when the tires are cold, meaning the car has been parked for at least three hours to get an accurate reading. The simplest method is to use a tire pressure gauge by inserting it into the valve stem—these are available at most gas stations or auto shops and aren't expensive. The normal pressure for the Lingpai usually ranges around 2.4 to 2.6 bar, which you can confirm by checking the label near the driver's side door. If the pressure isn’t up to standard, quickly add or release some air. If you have a TPMS system, check if the small tire light on the dashboard is on—if it is, inspect immediately. Why? Low tire pressure leads to faster wear, increased fuel consumption, while overinflation makes driving unsafe and risks a blowout. I recommend checking once a month to build the habit—it ensures smoother driving, better fuel efficiency, and above all, safety. Remember not to measure when the tires are hot, as the reading won’t be accurate, causing unnecessary hassle.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

Is M the internal or external circulation?

M stands for internal circulation. Below are the relevant details: A: Automatically determines whether internal or external circulation is needed based on the air quality outside the vehicle, using sensors for automatic detection. This is generally useful in hazy weather. M: Refers to internal circulation, which is manually controlled. It means the air blown by the blower circulates only inside the vehicle, without external air intake. The advantages include fuel efficiency and faster cooling (or heating), while the disadvantage is reduced air renewal inside the car. External circulation means the blower draws air from outside the vehicle and blows it inside. The advantage is maintaining fresh air inside the car, but it consumes more fuel and has slower cooling (or heating) speeds.
11
5
Share

Why Can the Key Be Inserted but Not Turn to Open the Door?

Mechanical keys can be inserted into the lock but fail to turn and open the door, possibly due to the following reasons: 1. Vehicle fuel system issue: The vehicle's fuel system needs to be inspected. 2. Vehicle electrical circuit issue: The vehicle's electrical circuit needs to be checked. 3. Activation of the steering wheel auto-lock function: The steering wheel locks because it was not straightened or was turned when the car was last parked, triggering the auto-lock function. This causes the steering lock pin to engage with the steering column, making it impossible to turn the key even with force. This is a common anti-theft feature in most cars. To resolve this, place one hand on the steering wheel and use the other hand to turn the car key back and forth, and the car will start quickly.
6
1
Share

How to Study Online for B2 Driver's License Points Deduction?

The operation process for studying online after points deduction on a B2 driver's license is as follows: 1. Download the Traffic Management 12123 APP and open the login interface. The username for login is the ID card number. If you forget the password, you can click 'Forgot Password' and retrieve it via SMS verification using the mobile phone number registered during the face-to-face signing. 2. After successfully logging into the personal account, click 'More' on the homepage, select the 'Education and Learning Services', then click 'Review Education Application' to choose the education method. 4. Click 'Review Education Application'. There are two learning methods: online education and on-site education. Select online education to study via mobile phone. 5. After selecting online education, carefully read the business instructions and click 'Read and Agree'. 6. After successfully scheduling the online education, a prompt will appear. You can then click 'Start Learning' below to begin the review study. After entering the study, you can choose between 'Course Learning' for video watching or 'Review Test' for answering questions. The study time must be at least 3 hours. (Note: If the 3-hour requirement is not met by midnight on the same day, the study time before that will be invalidated).
20
1
Share

What is the lifespan of a 7-speed wet dual-clutch transmission?

Under normal circumstances, the designed service life of a 7-speed wet dual-clutch transmission is at least 300,000 kilometers, and most can operate up to 250,000 kilometers. Below is relevant information about the transmission: Working principle: The transmission relies on transmission fluid for cooling, lubrication, and hydraulic power transfer. If the transmission fluid is used for too long, it will significantly reduce the transmission's performance. When the transmission fluid becomes severely contaminated, it can also lead to a series of transmission malfunctions. Hazards of not changing the fluid promptly: Failure to change the transmission fluid in time can result in weak starts when the car is cold. Additionally, transmission fluid can deteriorate and evaporate under high-speed and high-temperature conditions, thereby accelerating the wear of mechanical components and, in severe cases, damaging internal transmission parts. It can also cause the transmission fluid to thicken, which may block the transmission cooler, leading to excessively high transmission fluid temperatures, increased wear, and the vehicle being more prone to minor slipping during driving.
7
1
Share

What is the sequence for using the three differential locks?

The three differential locks must be engaged in a fixed sequence: 1-2-3, which corresponds to center-rear-front differential locks in order. Below are the details: Engage Differential Lock 1 (Center Differential Lock): This synchronizes the rotation speed of the front and rear axles, suitable for gravel roads, slightly uneven surfaces, or gentle slopes where single-wheel slip (either front or rear) may occur. However, it is not suitable for cross-axle terrain. Engage Differential Lock 2 (Rear Differential Lock): This ensures both rear wheels and the front axle rotate at the same speed, ideal for situations like encountering large rocks or severely uneven terrain where only one rear wheel maintains traction. Engage Differential Lock 3 (Front Differential Lock): This provides equal power to all wheels, designed for extreme off-road conditions where wheels on one side completely lose traction or only a single wheel has grip. It is particularly useful for desert driving or snow recovery scenarios.
17
5
Share

What to Do If the Driver's License Annual Inspection Expires?

If the annual inspection has expired, as long as the driver's license is still within its validity period or has been expired for less than one year, you can apply for the inspection at the vehicle management office with your ID card, driver's license, and physical health certificate. According to regulations, if you drive a vehicle with an overdue inspection, you may be fined between 200 and 500 yuan if caught. The details are as follows: 1. Purpose of Annual Inspection: The annual vehicle inspection refers to the annual examination of vehicles that have already obtained official license plates and registration certificates, conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." The aim is to check the main technical conditions of the vehicle, urge the strengthening of vehicle maintenance, keep the vehicle in good condition, and ensure driving safety. 2. Processing Time: From the "Valid From" date at the bottom left of the driver's license to the "Valid Until" date on the right (initially 6 years), you can apply for a renewal at the issuing vehicle management office within 90 days before the expiration date. There is no need to submit a physical condition certificate during this period (i.e., no need to participate in the "annual inspection").
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.