How to check tire pressure on the 2019 New Sagitar?

Is the Oil Filter Element the Same as the Oil Filter?

Oil filter element is the same as the oil filter, which is also known as the oil cartridge. There are two types: full-flow and bypass. The full-flow filter is connected in series between the oil pump and the main oil passage, filtering all the lubricating oil entering the main oil passage. The bypass filter is connected in parallel with the main oil passage, filtering only part of the lubricating oil pumped by the oil pump. During engine operation, metal shavings, dust, oxidized carbon deposits and gum deposits under high temperatures, water, and other contaminants continuously mix into the lubricating oil. The function of the oil filter is to remove these mechanical impurities and gum deposits, keeping the lubricating oil clean and extending its service life.

17

3

Share

How much engine oil is suitable for the Verano?

Verano requires approximately 4 liters of engine oil. If the oil level in the Verano is below the shadow line area at the end of the dipstick, it is necessary to add the recommended amount of oil and check the oil level again. The Verano is a mid-size sports sedan under SAIC-GM Buick, with dimensions of 4723 mm in length, 1802 mm in width, and 1466 mm in height, and a wheelbase of 2700 mm. In terms of configuration, the Verano is equipped with features such as a winged chrome grille, winged LED automatic sensing headlights, winged LED taillights, 17-inch ten-spoke two-tone aluminum alloy sports wheels, and a fastback roof.

3

1

Share

What Causes Uneven Wear on the Front Tires of a Car?

Uneven wear on the front tires of a car may be caused by inaccurate wheel alignment or improper toe adjustment. Inaccurate Wheel Alignment: When a car's wheel alignment is inaccurate, the tires may naturally experience deviation or abnormal wear. If abnormal tire wear is detected, timely adjustments should be made to avoid tire blowouts due to uneven wear while driving. This not only affects the normal service life of the tires but also increases driving safety risks. Improper Toe Adjustment: This is another reason for uneven wear on the front tires. Toe refers to the slight inward tilt angle of the front wheels. If this angle deviates, it can lead to uneven tire wear.

12

4

Share

What brand of tire is charmhoo?

charmhoo is a tire brand under Changluhong, which belongs to Shandong Changhong Rubber Technology Co., Ltd. The company is a modern tire enterprise integrating the production and sales of high-performance semi-steel radial tires, all-steel radial tires, and international trade. Changluhong tires have three series: high-performance luxury sports tires, high-end comfort tires, and durable commercial tires. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during driving. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance.

12

1

Share

Does brake fluid decrease with use?

It does decrease with use. More details are as follows: Replacement interval: The replacement interval for brake fluid is 2 years or 40,000 kilometers. This interval is influenced by usage conditions, as brake fluid has certain corrosive and hygroscopic properties, requiring the replacement cycle to be extended or shortened based on specific circumstances. Relevant information about brake fluid is as follows: Brake fluid is the liquid medium that transmits braking pressure in hydraulic braking systems, used in vehicles equipped with hydraulic braking systems. Brake fluid, also known as braking oil or force oil, is an indispensable part of the braking system. Since liquids cannot be compressed, the pressure output from the master cylinder is directly transmitted to the wheel cylinders through the brake fluid.

8

2

Share

Why is the ABS warning light on in the Tiguan?

When the car displays ABS, it indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, which poses significant safety risks. The ABS warning light can illuminate under various conditions, each with different causes and solutions, as detailed below: Condition 1: ABS warning light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thereby failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can lead to signal issues and system failure. Solution: Inspect the wiring connections and reconnect any loose parts. Condition 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and voltage rises, the ABS warning light turns off. This can also occur if the ABS system's power supply voltage is too low, such as due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). Condition 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's electrical connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. Condition 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. Condition 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with your finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

13

1

Share

How to check tire pressure on the 2019 New Sagitar?

Is the Oil Filter Element the Same as the Oil Filter?

How much engine oil is suitable for the Verano?

What Causes Uneven Wear on the Front Tires of a Car?

What brand of tire is charmhoo?

Does brake fluid decrease with use?

Why is the ABS warning light on in the Tiguan?

What brand is GAC Toyota Hybrid?

What does Ford Raptor aux1234 mean?

What Causes the Engine Warning Light to Illuminate in the Kodiaq?

What does the car EPC refer to?