How to Check Tire Pressure on the 2019 New Sagitar?

What Causes the Left Front Wheel of Honda Lingpai to Shake?

The reasons for the left front wheel shaking in Honda Lingpai: excessive wear of the wheel hub bearing, and tire out-of-roundness. The Lingpai is a compact 4-door, 5-seater sedan under the Honda brand, equipped with a 1.5L three-cylinder engine. The maximum power speed is 6000 revolutions per minute, and the maximum torque speed is 5000 revolutions per minute, paired with an eCVT continuously variable transmission. The body dimensions of the Honda Lingpai are 4756mm in length, 1804mm in width, and 1509mm in height, with a wheelbase of 2730mm. The front suspension of the Honda Lingpai uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension, and it adopts a front-engine, front-wheel-drive layout.

18

4

Share

Which Direction to Loosen Wheel Lug Nuts?

For passenger cars, the wheel lug nuts loosen to the left (counterclockwise) and tighten to the right (clockwise). For heavy-duty trucks, the left-side wheel follows "left-tighten, right-loosen," while the right-side wheel follows "right-tighten, left-loosen." To loosen a passenger car's lug nuts, turn counterclockwise: place your left hand toward the wheel center and lift the wrench upward with your right hand. Truck lug nuts differ by side—left-side nuts have reverse threads (tighten by turning opposite the rolling direction), while right-side nuts have standard threads (tighten by turning in the rolling direction). Additional tips: 1. Lug nut tightening technique: Since tires are secured by five nuts, first install four diagonally before adding the fifth. Maintain consistent turns per nut to ensure even force distribution. 2. Rust prevention: Use solvent-free paint for vibrating machinery; opt for non-oxidizing impregnating varnish like epoxy-urethane or unmodified epoxy. When using melamine alkyd varnish, adjust curing to slightly above 130°C (e.g., 135°C) for over 180 minutes, strictly adhering to specifications.

6

5

Share

What are the differences between the new Passat Elite and Luxury editions?

The differences between the new Passat Elite and Luxury editions: 1. Different engines: The new Passat Elite edition is equipped with a 4-cylinder 1.4T 150-horsepower engine with an aluminum alloy cylinder block; the new Passat Luxury edition is equipped with a 4-cylinder 2.0T 186-horsepower engine with a cast iron cylinder block. 2. Different curb weights: The new Passat Elite edition weighs 1470 kg; the new Passat Luxury edition weighs 1575 kg. 3. Different tire specifications: The front and rear tires of the new Passat Elite edition are sized 215/55R17; the front and rear tires of the new Passat Luxury edition are sized 235/45R18. 4. Different active and passive safety features: The new Passat Elite edition lacks lane change assist and active brake active safety systems; the new Passat Luxury edition is equipped with lane change assist and active brake active safety systems.

8

3

Share

What engine does the Tiggo 3 have?

Tiggo 3 is equipped with a 1.5L naturally aspirated engine and a 1.6L naturally aspirated engine. The 1.6L naturally aspirated engine delivers 126 horsepower and a maximum torque of 160 N·m, featuring DVVT technology and multi-point fuel injection technology, with an aluminum cylinder head and cast iron cylinder block. The 1.5L naturally aspirated engine produces a maximum horsepower of 116 hp, a maximum power of 85 kW, and a maximum torque of 143 N·m, paired with a 5-speed manual transmission. The Tiggo 3 is a compact SUV under the Chery brand, with body dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. The front suspension of the Tiggo 3 uses a MacPherson strut independent suspension, while the rear suspension employs a double-wishbone independent suspension.

13

3

Share

What is the Difference Between Scoring and Deducting Points?

There is only the term 'scoring' for driver's licenses, not 'deducting points'. Violation points are recorded in sequence from 1 to 12, with 12 being the maximum. Below are specific details on related content: Probationary Period: For C1 and lower-class licenses, as long as the points remain below 12 and fines are paid promptly, the probationary period can generally be passed safely. For A and B-class licenses, the violation points must be kept below 6 (not including 6). If points exceed 6 but do not reach 12, fines should be paid immediately, and the probationary period extends for one year. If points exceed 6 again but do not reach 12, the driving qualification for the highest permitted vehicle type will be revoked. If 12 points are recorded at once, regardless of the license type, the probationary driving qualification will be revoked. If the probationary driving qualification is not for the highest permitted vehicle type, the highest permitted vehicle type's driving qualification will also be revoked. Revocation of Driving Qualification: If a motor vehicle driver accumulates 12 points during the probationary period, the probationary driving qualification for the permitted vehicle type will be revoked. If the revoked qualification is not for the highest permitted vehicle type, the highest permitted vehicle type's driving qualification must also be revoked as per Article 68, Paragraph 1. Drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks who accumulate 6 or more points but fewer than 12 during the one-year probationary period will have their probationary period extended by one year. If they accumulate 6 or more points again during the extended probationary period but fewer than 12, their probationary driving qualification for the permitted vehicle type will be revoked.

2

3

Share

What are the causes of DSG automatic transmission failures?

DSG automatic transmission failures are caused by: malfunctions in the transmission's mechatronic control unit. In addition to offering the flexibility of a manual transmission and the comfort of an automatic transmission, the DSG provides uninterrupted power output, which is fundamentally different from two automatically controlled clutches. The DSG primarily consists of several major components: two basic 3-shaft 7-speed mechanical gearboxes, an electro-hydraulic clutch mechanism containing two sets of multi-plate clutch discs, and a gearbox ECU. Unlike conventional dual-shaft gearboxes or single input shaft systems, the DSG gearbox not only features dual clutches but also a coaxial dual input shaft system, with the 7 forward gears distributed on the respective driven shafts on both sides.

18

4

Share

How to Check Tire Pressure on the 2019 New Sagitar?

What Causes the Left Front Wheel of Honda Lingpai to Shake?

Which Direction to Loosen Wheel Lug Nuts?

What are the differences between the new Passat Elite and Luxury editions?

What engine does the Tiggo 3 have?

What is the Difference Between Scoring and Deducting Points?

What are the causes of DSG automatic transmission failures?

How many color options are available for the Geely Boyue?

What is the Real Purpose of a Car Sunroof?

How many bottles of refrigerant are generally needed for a car's air conditioning?

What are the dimensions of the Buick GL8 model?