How to Check Tire Pressure?

2 Answers
TaylorAnn
07/24/25 7:35am
Methods to check tire pressure: You can view the feedback information from the car's dashboard or the central control display's onboard computer, use a tire pressure gauge to measure, or observe the number of tire treads in contact with the ground. The normal tire pressure for a car is between 2.3 and 2.5 bar. Due to environmental factors, tire pressure can be slightly higher in winter and lower in summer. Symptoms of overinflated tires: 1. The vehicle reacts noticeably to road conditions while driving, with larger tire bounce over bumpy sections; 2. The steering wheel feels lighter at high speeds, making turns more agile; 3. Reduced friction between the tires and the ground lowers fuel consumption to some extent, but the vehicle is more prone to skidding during high-speed turns. Symptoms of underinflated tires: 1. The vehicle reacts sluggishly to road conditions while driving, with reduced bumpiness; 2. The steering wheel feels heavier, increasing steering resistance; 3. Increased friction between the tires and the ground leads to higher fuel consumption.
Was this review help?
17
1
Share
DiIris
08/11/25 3:18am
As a car enthusiast, I often check tire pressure myself—it's a fundamental skill for ensuring driving safety. First, you'll need a tire pressure gauge—there are digital and manual needle types available on the market, and I prefer digital ones for better accuracy. Make sure the car has been parked for at least three hours with cold tires before checking to get accurate readings. Then, press the gauge firmly onto the tire’s valve stem and read the stabilized measurement, comparing it against the recommended values (usually 30-35 PSI) listed in your vehicle manual or on the label inside the driver’s door. If the pressure is low, inflate the tires using a home pump or a gas station air compressor. Remember to check every four weeks, especially during seasonal changes, as temperature fluctuations affect tire pressure. I find this method simple yet effective—it prevents uneven wear and blowouts while saving fuel costs. After adjusting my tire pressure before a recent road trip, I saved 5% on fuel consumption.
Was this review help?
20
1
Share
Expand All
More Forum Discussions

Is it necessary to use a circulation machine for transmission fluid replacement?

Whether it is necessary to use a circulation machine for transmission fluid replacement depends on specific circumstances. Here is a detailed introduction to circulation machine fluid replacement: 1. Fluid replacement method: The circulation machine injects new fluid while extracting the mixed old and new fluid, resulting in a high replacement rate and more thorough fluid replacement. However, it consumes more fluid, is relatively wasteful, and incurs higher costs. 2. Reasons not to recommend using a circulation machine: It is not recommended to use a circulation machine for transmission fluid replacement, especially for automatic transmissions with high mileage, due to certain risks. While the circulation machine can remove impurities stuck in the torque converter, hydraulic valve body module oil passages, or deposited in the oil pan and transmission filter, these impurities may flow through the pipes and clog components such as the torque converter, hydraulic valve body, and transmission filter screen. This can lead to issues like poor oil flow and solenoid valve sticking. Therefore, the appropriate fluid replacement method should be chosen based on the vehicle's specific usage conditions and transmission model.
1
3
Share

What is the reason for low tire pressure in one tire of a new car?

A new car having low tire pressure in one tire is caused by poor sealing performance of the tire. Here is a detailed introduction to adjusting car tire pressure: 1. Rough roads: On rough roads, it is appropriate to reduce the tire pressure by 0.1-0.2bar below the standard tire pressure. For long-distance high-speed driving, the tire pressure should not be too low; it is advisable to increase the tire pressure by about 0.2bar above the lower limit of the standard tire pressure. 2. New vs. old tires: For new tires, the tire pressure can be increased by about 0.2bar above the standard tire pressure. For old tires, it is appropriate to reduce the tire pressure according to the standard tire pressure, and if the wear is severe, follow the lower limit of the standard tire pressure. 3. Summer and winter: In winter, it is advisable to increase the tire pressure by about 0.2bar above the standard tire pressure. In summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the tire pressure can generally be about 0.1bar lower than the standard to avoid high-temperature blowouts.
15
0
Share

Can a motorcycle still be registered if the QR code on the certificate of conformity cannot be scanned?

If the QR code on the motorcycle's certificate of conformity cannot be scanned, the motorcycle cannot be registered, and the certificate of conformity needs to be replaced. New motorcycle registration process: Before applying for a license plate, you should first bring the invoice, certificate of conformity, and your ID card to the National Tax Bureau to apply for the vehicle purchase tax, and then go to an insurance company to apply for compulsory third-party liability insurance for the motorcycle. After completing the above procedures, you can go to the vehicle management office of the traffic police brigade of the public security bureau to apply for the license plate. If all the documents are complete, the process can be completed in one go. When applying for registration, the owner of the motor vehicle should fill out an application form, present the motor vehicle for inspection, and submit the following documents and certificates: The identity document of the motor vehicle owner, the invoice or other proof of the origin of the motor vehicle, the certificate of conformity for the whole vehicle or the import certificate for imported motor vehicles, the tax payment or exemption certificate for vehicle purchase tax, the certificate of compulsory third-party liability insurance for motor vehicle accidents, and the tax payment or exemption certificate for vehicle and vessel tax.
1
2
Share

Where are Mercedes-Benz engines produced?

Mercedes-Benz Sprinter engines are produced in China. For example, the Mercedes-Benz Sprinter is manufactured by Fujian Mercedes-Benz, and its engines are also produced in China. The Mercedes-Benz engine factory located in Beijing not only supplies engines for Beijing Mercedes-Benz passenger vehicles but also provides engines for Fujian Mercedes-Benz commercial vehicles, and even exports them overseas. Low-power version 3.0-liter turbocharged engine: The low-power version 3.0-liter turbocharged engine has 299 horsepower and a maximum torque of 400 Nm. This engine reaches its maximum power at 5800 rpm and its maximum torque between 1800 and 4000 rpm. This engine is equipped with a 48V mild hybrid system and direct fuel injection technology, and it uses an aluminum alloy cylinder head and block. High-power version 3.0-liter turbocharged engine: The high-power version 3.0-liter turbocharged engine has 367 horsepower and a maximum torque of 500 Nm. This engine reaches its maximum power between 5500 and 6100 rpm and its maximum torque between 1800 and 5800 rpm. This engine is equipped with a 48V mild hybrid system and uses an aluminum alloy cylinder head and block.
8
1
Share

What are the differences between the Verano Pro and Verano Pro GS?

Differences between the Verano Pro and Verano Pro GS: Exterior differences: The Verano Pro features a winged front grille design, with integrated LED headlights and chrome trim connecting to the grille, along with a three-piece lower bumper, which quickly elevates the overall premium feel of the vehicle. On the other hand, the Verano Pro GS has a more sporty front fascia compared to the Verano Pro, characterized by a larger-sized air intake grille. The Verano Pro GS also sports a small ducktail spoiler at the rear for a more stylish look, along with hidden exhaust tips to enhance the rear's clean appearance. Configuration differences: The Verano Pro GS adopts a wraparound cockpit-style interior, predominantly black with extensive red stitching on the seats and other areas for accentuation. The Verano Pro is equipped with dual 10.25-inch full LCD instrument cluster and center console screens, with a resolution of 1920x720. It comes with the Buick eConnect 3.0 intelligent connectivity system, supporting Apple CarPlay and Baidu CarLife, and includes the iFlytek voice recognition system.
2
0
Share

What Are the Tips to Absolutely Avoid Stalling During the Slope Start in Subject 2?

Here are the tips to avoid stalling during the slope start in Subject 2: 1. Gently apply the throttle: When going uphill, if you don't apply the throttle, it's likely that the idle speed won't be enough to drive the vehicle to start, resulting in a stall. Once the vehicle starts rolling backward, it's hard to avoid stalling. When rolling backward occurs, you must first press the brake and clutch, stop the vehicle, and then start again. 2. Slowly release the clutch: During the slope start, when the left foot slowly releases the clutch pedal until the vehicle starts to vibrate, it should be slightly fixed at this position to confirm whether the vehicle has the tendency and power to move forward. Do not continue to lift the clutch pedal to prevent stalling. When the vehicle starts moving forward, the right hand should completely release the handbrake and slowly apply the throttle. 3. Avoid keeping the clutch in the semi-engaged state for too long: During the starting process, avoid keeping the clutch in the semi-engaged state while pressing the throttle to accelerate. As long as the vehicle is driven by the throttle, it won't roll backward, so you can confidently release the clutch pedal and press the throttle to start.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.