How to check the water temperature of Roewe RX3?
4 Answers
Roewe RX3 water temperature can be checked at the lower right of the dashboard. The normal water temperature of the vehicle is around 4 to 5 bars. If the water temperature gauge turns red and the warning light comes on, it indicates that the water temperature is too high. Please stop the vehicle immediately and let the water temperature return to normal. The correct approach for high water temperature is to keep the engine running at idle for a while, while turning the air conditioning to the maximum heating position to help dissipate heat. The Roewe RX3 is a compact SUV under SAIC Roewe, with a length, width, and height of 4408mm, 1804mm, and 1651mm respectively, and a wheelbase of 2625mm. In terms of active safety protection, the Roewe RX3 is equipped with 12 safety functions including EPB, cross-level standard front side airbags, and a small A-pillar blind spot, providing users with safety protection and a wide driving view.
I've been driving the Roewe RX3 for several years, and checking the water temperature is part of my daily routine. After starting the car, there's a circular or bar-shaped water temperature indicator in the middle of the dashboard, marked with a thermometer icon or ℃ symbol. The normal water temperature should be around 90 degrees, with the needle staying in the middle green zone. While driving, a quick glance at the dashboard can alert me to any changes in water temperature—it tends to rise during long highway drives or summer traffic jams. If the needle leans towards the red H zone, I immediately stop to check the coolant level. Remember, never force the car to run if the water temperature isn't right, as it could damage the engine. During regular maintenance, I always remind myself to check if the cooling system is functioning properly, and switching to the original coolant has given me much more peace of mind. Developing small habits like this can save big repair costs and enhance driving safety.
As someone who has worked on many cars, the Roewe RX3 makes it simple and clear to check the water temperature on the instrument cluster. After starting the engine, the temperature gauge with a scale immediately displays the reading. Normally, the needle pointing at the middle 90℃ indicates the normal operating range; if it doesn't move or rises too quickly, there might be underlying issues—such as a stuck thermostat, a leaking water pump, or low coolant levels. Beginners should note that abnormal water temperature can lead to engine seizure risks. Make it a habit to spend a few seconds checking the initial water temperature before driving and glance at it periodically during the trip. If the warning light comes on, pull over immediately—don't take risks. Key cooling system maintenance: Check the fluid level monthly, use genuine antifreeze to avoid corrosion issues, and ensure the engine stays healthy and long-lasting.
When I first bought the Roewe RX3, I was also clueless, but checking the water temperature is actually straightforward. After starting the car, look at the dashboard, the area in front of the steering wheel. Find the small gauge with the thermometer symbol—if the needle is in the green zone, it's normal; if it goes higher, stop driving. Incorrect water temperature can cause engine overheating and damage, so wait for it to reach 90°C before driving off. On long trips, I set an alarm to remind myself to check the water temperature regularly. The simplest solution is to schedule regular maintenance to inspect the coolant—just top it up if it's low, ensuring a safe and worry-free drive.
