How to check the total mileage on the 3rd-gen H6?

2 Answers
DeAnastasia
07/24/25 9:38am
Enter the driver's cabin to view the vehicle's dashboard. The left gauge displays the vehicle's speed. The right gauge shows the engine RPM. Additionally, you can see the vehicle's odometer.
Was this review help?
5
1
Share
KathrynFitz
08/11/25 4:57am
Checking the total mileage of the Haval H6 3rd generation is very simple. After starting the vehicle, just look at the dashboard where the total mileage is digitally displayed, usually on the screen in front of the steering wheel. I learned this from a friend. The first time I drove, I was worried I wouldn't find it, but I discovered it's displayed by default on the main page without needing to press any buttons. Remember, the total mileage is used to record how far the car has traveled. When you get a new car, it's advisable to note down the initial number as it will be useful for maintenance. Also, don't confuse it with Trip A or B, which are for recording short distances. Don't get distracted looking at it while driving; safety comes first. If the dashboard is a bit blurry or dirty, wiping it can make it clearer.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What type of gasoline should the XT5 use?

The XT5 theoretically uses 95-octane gasoline. Below is relevant information about gasoline: 1. Introduction: Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled and cracked from petroleum, used as fuel. 2. Properties: It appears as a transparent liquid, is flammable, with a distillation range of 30°C to 220°C. Its main components are C5–C12 aliphatic hydrocarbons and cycloalkanes, along with a certain amount of aromatic hydrocarbons. 3. Classification: Gasoline has a high octane rating (anti-knock combustion performance) and is classified by octane rating into grades such as 89, 90, 92, 93, 95, 97, and 98. Starting from January 2012, the gasoline grades 90, 93, and 97 were revised to 89, 92, and 95.
17
2
Share

How to Fold Down the Rear Seats from Inside the Sagitar?

The method to fold down the rear seats from inside the Sagitar is: Insert the seat belt buckle into the square frame position above the back of the rear seat to release it. The Sagitar's body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. The Sagitar features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
13
1
Share

What are the differences between the Qashqai and the Kicks?

The differences between the Qashqai and the Kicks are as follows: 1. Different engine displacements: The Qashqai offers three displacement options, namely 1.2T, 1.6L, and 2.0L, while the Kicks only has a 1.5L displacement. 2. Different drive modes: The Qashqai features front-wheel drive and front four-wheel drive, whereas the Kicks only has front-wheel drive. 3. Different body structures: The Qashqai has a longer wheelbase and larger trunk capacity compared to the Kicks, and it uses a multi-link independent suspension. The Kicks employs a torsion beam non-independent suspension. 4. Different model options: The Qashqai offers 52 model variants to choose from, while the Kicks only has 18. 5. Different vehicle classes: The Qashqai is classified as a compact SUV, whereas the Kicks is categorized as a small SUV.
20
5
Share

Why does the Audi Q3 fan keep running even when the water temperature is not high?

Audi Q3 fan keeps running even when the water temperature is not high, which is a normal situation. The following is a related introduction to car air conditioning: 1. Air conditioning layout: Different types of air conditioning systems have different layout methods. Currently, integrated heating and cooling air conditioning systems are widely used in passenger cars. The layout form involves assembling the evaporator, heater radiator, centrifugal blower, control mechanism, etc., together, which is called the air conditioning unit assembly. 2. Air conditioning composition: Modern air conditioning systems consist of refrigeration systems, heating systems, ventilation and air purification devices, and control systems. Car air conditioning generally mainly consists of a compressor, an electronically controlled clutch, a condenser, an evaporator, an expansion valve, a receiver-drier, pipelines, a condenser fan, a vacuum solenoid valve, an idle speed device, and a control system. Car air conditioning is divided into high-pressure pipelines and low-pressure pipelines. The high-pressure side includes the compressor output side, high-pressure pipelines, the condenser, the receiver-drier, and the liquid pipeline; the low-pressure side includes the evaporator, accumulator, return pipeline, compressor input side, and compressor oil sump.
3
5
Share

What car is the MG logo?

MG logo represents the British car brand MG (Morris Garages), and its models include: MG HB, MG HS, MG ZS, MG EHS, MG 6 New Energy, and the pure electric MG EZS. Taking the 2020 MG 6 as an example, its body dimensions are: length 4704mm, width 1848mm, height 1466mm, with a wheelbase of 2715mm. The 2020 MG 6 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 181PS, maximum power of 133kW, and maximum torque of 285Nm, paired with a 6-speed manual transmission.
3
5
Share

What are the causes of driveshaft imbalance?

The causes of driveshaft imbalance are: 1. The balance weights on the driveshaft have fallen off; 2. The driveshaft is bent or the driveshaft tube is dented; 3. The driveshaft tube and universal joint are not properly welded, or the driveshaft has not undergone dynamic balance testing and calibration; 4. The sliding yoke is misaligned during installation, causing the universal joint yokes at both ends of the driveshaft to not be in the same plane, failing to meet the constant velocity transmission condition. The symptom of driveshaft imbalance is that when the universal joint yoke and sliding yoke are in good technical condition, the vehicle emits a periodic noise during driving, with the noise increasing as the speed rises, and may even be accompanied by body vibration, causing numbness when holding the steering wheel.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.