How to Check the Total Mileage of the New Qashqai?

Can electric motorcycles carry passengers?

Yes, they can carry passengers. Electric vehicles weighing over 40 kilograms and capable of speeds exceeding 20 km/h are classified as motorcycles. These must use motor vehicle lanes and require either a Type E or Type F driver's license. Below is relevant information: Definition of electric motorcycles: Riding an electric motorcycle legally requires holding a motorcycle driver's license (with driving code E) in accordance with regulations. Therefore, it's crucial to distinguish whether the purchased electric vehicle is an electric bicycle or an electric motorcycle. Although both are electric vehicles, they are considered different vehicle types by traffic police authorities. Classification of electric vehicles: Electric vehicles can be categorized by tire count and structural type into: electric bicycles, electric motorcycles, electric unicycles, electric quadricycles, electric tricycles, and electric scooters. By power source: pure electric vehicles, range-extended electric vehicles, hybrid electric vehicles, and fuel cell vehicles. By drive method: pure electric vehicles, hybrid electric vehicles (series, parallel, series-parallel), and fuel cell electric vehicles.

18

1

Share

What Causes a Motorcycle's Rear Wheel to Lock Up and Stop Turning?

Motorcycle rear wheel lock-up and failure to rotate are typically caused by brake or brake pad malfunctions. Repaired brake pads may lead to issues with the brake end cover and cable fixing bolt when impacted by hard objects, resulting in rear wheel lock-up. Below are motorcycle maintenance tips: Engine Oil: Engine oil is the top priority in maintenance. How to choose the right engine oil? It is essential to use at least semi-synthetic imported oil, with fully synthetic oil being the best option. Fully synthetic oil generally needs replacement every 3,000-4,000 kilometers. Gasoline: Most large-displacement multi-cylinder motorcycles have relatively high compression ratios, so it is recommended to use higher-octane gasoline. Tires: Avoid applying water wax or oil-based products to tires, as oils have an affinity for rubber, which can cause tire cracking and degradation, posing safety risks. Since motorcycles rely on leaning to navigate turns, tires are of utmost importance.

2

5

Share

How Fast Can a 110cc Motorcycle Go?

It depends on the specific model. Currently, most 110cc motorcycles sold in the market are underbone models, and their top speeds vary. The fastest can reach 100–110 km/h, while more commonly, underbone motorcycles can only reach around 80–90 km/h. Below is an introduction related to engine displacement: Engine Displacement and Cars: The volume of space the piston moves from top dead center to bottom dead center is called the cylinder displacement. If the engine has multiple cylinders, the sum of the working volumes of all cylinders is called the engine displacement, usually expressed in liters (L). Engine displacement is one of the most important structural parameters, more representative of engine size than bore and cylinder count. Many engine metrics are closely related to displacement. Displacement Classification: In China, passenger car classification is determined by engine displacement. Micro cars have a displacement of ≤1.0L; compact cars range from 1.0–1.6L; midsize cars range from 1.6–2.5L; executive cars range from 2.5–4.0L; and luxury cars have a displacement >4.0L.

10

4

Share

Is it harmful for a 125cc scooter to run at 90km/h?

125cc motorcycles are not suitable for prolonged continuous high-speed operation at 90km/h, which is not beneficial for the engine. Precautions for riding a scooter: Choose mineral oil: It is not recommended to use fully synthetic lubricating oil, mainly because the oil change cycle during the break-in period is relatively short, and using fully synthetic lubricating oil would be somewhat wasteful. Ordinary high-quality mineral lubricating oil can meet the basic lubrication needs of a scooter engine. Change lubricating oil: During the break-in period of a scooter, apart from changing the lubricating oil, the main things to pay attention to are controlling the engine speed and maintaining a reasonable speed. Oil lubrication: The operation of the engine depends on the lubrication of the oil; otherwise, it will cause dry friction, and the internal parts of the engine will quickly wear out and fail prematurely.

15

0

Share

Is it okay not to downshift when emergency braking on a motorcycle?

When emergency braking on a motorcycle, it is actually acceptable not to downshift. This approach can utilize engine braking to shorten the braking distance and prevent loss of control. At worst, the engine may stall, but there are no other adverse consequences. Here are some key points to note about emergency braking on a motorcycle: Use both front and rear brakes simultaneously during emergency braking: Applying both brakes together is an effective method for achieving short-distance emergency stops. The primary braking force on a motorcycle comes from the front brake, which provides approximately 70% of the stopping power. However, 70% alone is insufficient; adding the braking force from the rear brake significantly enhances the overall braking effect. Pay attention to downshifting during braking: If there is sufficient braking distance and the rider can react in time, it is recommended to downshift after slowing down. If the rider is already in first gear during an emergency, they should maintain that gear. Additionally, it is best practice to downshift to first gear before coming to a complete stop each time.

20

1

Share

Where to Adjust for Motorcycle Lacking Power on Uphill?

Motorcycle lacking power on uphill can be adjusted at the clutch, because uphill power deficiency is usually due to insufficient power, and the common cause is clutch slippage preventing the engine's power from being normally output, resulting in uphill power deficiency. Function of the Clutch: The clutch is the component in the automotive transmission system directly connected to the engine. Its role is to smoothly engage or temporarily disconnect the engine's power from the transmission, reliably transmitting the engine's torque, facilitating the driver's operations such as starting, stopping, and shifting gears. Clutch Inspection Method: If the clutch pedal has no free play, it will cause clutch slippage, resulting in the vehicle lacking power during driving. If the clutch pedal's free play is too large, preventing the clutch from fully disengaging, it will cause difficulty in shifting gears. During inspection, depress the clutch pedal until resistance is felt. This distance is the clutch pedal's free play. The free play must be within the specified limit range of 6-13mm. If it does not meet the specifications, it should be repaired at a service station.

8

5

Share

How to Check the Total Mileage of the New Qashqai?

Can electric motorcycles carry passengers?

What Causes a Motorcycle's Rear Wheel to Lock Up and Stop Turning?

How Fast Can a 110cc Motorcycle Go?

Is it harmful for a 125cc scooter to run at 90km/h?

Is it okay not to downshift when emergency braking on a motorcycle?

Where to Adjust for Motorcycle Lacking Power on Uphill?

What are the conditions for returning or exchanging a car under the 2021 Automobile Three Guarantees Law?

What are the effects of idling a car with the air conditioning on for a long time?

How many kilometers can an electric motorcycle travel?

What is the best setting for motorcycle rear shock absorber?