How to Check the Tire Wear Indicator Triangle?

[RyanLee]

To check the tire wear indicator triangle: 1. Locate the small triangular arrow mark on the side tread pattern of the tire; 2. Follow the mark to find the raised indicator in the groove of the tire tread; 3. When the tread depth is lower than the wear indicator, it means the tire is nearing the end of its life. Tire maintenance methods: 1. Ensure correct tire pressure; 2. Regularly check for bulges, cracks, cuts, punctures, or abnormal wear; 3. Inspect the tire surface for stones, nails, or other hard objects and clean them promptly; 4. Perform tire rotation. Tire rotation methods: 1. For bias-ply tires, swap the tires on the same axle to ensure even wear on both sides; 2. For radial tires, rotate them within the same side of the vehicle.

[AmaraRose]

As a car enthusiast with over 20 years of driving experience, I always insist on personally checking tire safety. Finding the small triangle wear indicator on tires is actually quite easy: after parking on level ground, squat down and slowly observe along the tread. You'll usually spot small raised triangular symbols in the grooves between tire patterns. When the tire wears down to the height of this triangle, the tread depth falls below safety standards, meaning braking distance on wet roads will increase, raising accident risks. I recommend doing this monthly along with tire pressure checks. The one-yuan coin test also works: insert the coin upside down into the tread - if you can still see the '1元' characters, the depth is sufficient; otherwise, it's time to replace the tires. Pay extra attention before summer rainy seasons. Don't compromise safety to save money, as losing control during critical moments could jeopardize family trips.

[DeCarmen]

Before every trip, I like to quickly check the tire condition. This small triangle is located on the sidewall or tread pattern of the tire - just crouch down and you'll see the raised portion. If the triangle is nearly flush with the tread surface, it indicates severe wear and means you must replace the tire immediately. This directly affects braking performance and wet weather traction. I once almost lost control on the highway because I neglected this. Now I use a car app to track reminders and compare changes with phone photos. I recommend professional tire inspections twice a year to ensure proper tread depth. Don't just focus on appearance - tire health directly impacts driving pleasure. Always verify before long trips.

[DeQuinn]

As the family's designated driver, I always prioritize tire details. Checking the wear indicators is simple: crouch beside the car, shine a flashlight on the tread, and look for those small raised triangle symbols. Once they become indistinct or flush, it's time to change tires, otherwise driving on wet roads could endanger the children's safety. I recommend checking during monthly car washes while also monitoring tire pressure. Safe driving accumulates from these small details—spotting issues early is better than regretting later.

[StDaniella]

With years of repair experience, I emphasize that checking the tire triangle mark is fundamental maintenance. After parking and turning off the engine, squat down and carefully observe the position of the small triangle in the tire tread; if the wear reaches its level, the tread depth is below the legal minimum, and replacement is necessary to prevent skidding. It is recommended to use professional tools or a one-yuan coin for assistance in detection: if the coin stands upright in the tread and the top is not visible, it's time for action. Regular self-inspection can prevent blowouts, especially before winter or long-distance driving. Neglecting this may lead to accidents—safe driving starts with simple steps.