How to check the tire pressure monitoring system in Emgrand?

3 Answers
EmilioLee
07/28/25 5:55pm
The method to check the tire pressure monitoring system in Emgrand is: When the tire pressure is abnormal, the tire pressure warning light will be displayed on the dashboard, but it cannot show the specific tire pressure values. The Emgrand is a compact 4-door 5-seater sedan with body dimensions of: length 4632mm, width 1789mm, height 1470mm, and a wheelbase of 2650mm. The Emgrand is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, with a maximum power of 80 kW and a maximum torque of 142 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using torsion beam non-independent suspension.
Was this review help?
17
4
Share
SanIsabelle
08/11/25 9:57pm
Checking tire pressure is quite convenient in the Emgrand. As I often drive long distances, I pay special attention to this. After starting the car, just look at the trip computer screen in the center of the instrument cluster. There's an arrow button on the right side of the steering wheel - press it a few times to toggle the tire pressure display. The pressure values for all four tires will be shown separately in bar units, and I usually maintain them around 2.3. If the tire pressure warning light (a yellow exclamation mark symbol) comes on, it means there's an issue with one of the tires. Remember that tire pressure tends to be higher in summer, so I always check it before highway driving since incorrect pressure affects braking distance. Last time I noticed the front left tire was 0.5 bar low, and a check revealed a small nail puncture. Now I've made it a habit to check every two weeks for safer driving.
Was this review help?
6
4
Share
Expand All
JordanDella
09/30/25 2:53am
Operating the tire pressure monitoring system on the Emgrand is quite simple. Here's my usual routine: After starting the car, I directly use the multifunction buttons on the right side of the steering wheel. By pressing the left and right directional keys to switch screens, I can find the tire pressure data in about two or three clicks. The dashboard clearly displays the pressure value for each tire. It's particularly important to check when the car is cold for the most accurate reading, so I always check before leaving in the morning. Normal tire pressure should be within the 2.2-2.5 bar range, and special attention should be paid during seasonal changes, such as when pressure tends to drop in winter. If abnormal values are noticed or the tire pressure warning light comes on, it's best to pull over and check. Once, I detected a slow leak thanks to the warning. This feature is crucial for driving safety as it helps identify potential tire blowout hazards in time.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What are the tire specifications for the Audi A4?

The domestic version of the Audi A4 comes with two tire specifications: 225/50r17 and 245/40r18, while the imported version is equipped with 245/45r18 tires. Below is an introduction to the Audi A4: 1. In terms of powertrain, the Audi A4 comes standard with Audi's patented Quattro all-wheel-drive system, providing the vehicle with double the traction. 2. During steering or braking, the system automatically, accurately, and timely distributes the ground force to each wheel. Additional information: 1. The FAW Audi A4 is sold in three displacement options: 1.8, 2.4, and 3.0. 2. Among them, the 1.8T is available in four variants, the 2.4 displacement in three variants, and the 3.0 displacement in only one variant.
16
2
Share

How often should the gear oil of a scooter be changed?

The replacement cycle for scooter gear oil is between 6000 to 10000 kilometers. Unlike engine oil, gear oil does not require frequent changes. Here are the daily maintenance methods for motorcycles: 1. During the break-in period, keep the motorcycle idle speed at 100 RPM. 2. Match the motorcycle gear with the corresponding speed. 3. When you need to brake due to an upcoming situation, release the throttle, step on the rear brake with your right foot, and gently apply the front brake with your right hand. 4. Regularly inspect the spark plugs. 5. When installing a new spark plug, hand-tighten it until it doesn't move, then use a spark plug socket to tighten it an additional quarter to half a turn. 6. Regularly lubricate the chain.
19
4
Share

How much horsepower can the Audi A4L be tuned to?

If we're talking about ECU tuning, it generally can increase the power by about 10%. The original 190PS horsepower of the Audi A4L can be tuned up to 250PS. Introduction to horsepower: Horsepower is a unit of power, with the international unit of power being the watt. People often see horsepower used in car power ratings, for example, a certain car's maximum power is 130 horsepower. When maximum power occurs: For family cars, the perfect engine should have maximum torque at very low RPMs, while maximum power should appear at relatively higher RPMs.
7
4
Share

Where is the wiper fuse located in a BMW 5 Series?

BMW 5 Series fuse box is located inside the glove compartment on the passenger side. After opening the glove compartment, remove the interior trim panel to access the fuse box. There is also another fuse box located on the side of the trunk. Steps to replace a fuse: Locate the corresponding position of the fuse box, then carefully pry open the cover using a screwdriver or other tools. On the inner side of the cover, you can find the corresponding component fuse based on the information provided. When replacing with a new fuse, ensure that parameters such as current match those of the original fuse. Important notes regarding fuses: Installing a fuse with a current rating higher than specified can easily cause component overload and damage. Never attempt to repair a fuse that has already been damaged.
3
1
Share

Where is the key insertion point for Volkswagen cars?

Volkswagen's door keyhole is located under the lock cover at the end of the door handle. To access the keyhole, you need to open the lock cover at the end of the door handle. When the remote key fails: First, pry open the lock cover, then insert the mechanical key to unlock the door. This allows the owner to open the door even without the smart key. When reinstalling the lock cover, be sure to pull the door handle outward before installation. Reason for hiding the keyhole: Designers concealed the keyhole for aesthetic purposes. This design is actually more practical than an exposed keyhole, as it prevents dirt from entering the keyhole while maintaining a clean and stylish appearance.
17
1
Share

What is the proportion of high-strength steel in Geely Emgrand?

Emgrand adopts a cage-type safety body with over 59% high-strength steel content. While enhancing overall strength to ensure ample space, it also incorporates Geely's unique, industry-leading "Safety Identification Circle", making it the most outstanding model in terms of safety coefficient within its class and even surpassing higher-class products. Definition of high-strength steel: It varies according to the degree of technological advancement required by the era. Generally speaking, alloy steel with a yield strength above 1370MPa (140kgf/mm) and tensile strength above 1620MPa (165kgf/mm) is called ultra-high-strength steel. Standards for high-strength steel: There are numerous international standards for high-strength steel, with just unified international standards including both "ISO" and "CEN". Almost every major steel-producing country has its own national standards.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.