How to check the tire pressure monitoring on Jetta VS5?

Is White Smoke from a Motorcycle Exhaust Pipe Indicative of Burning Engine Oil?

White smoke from a motorcycle is not caused by burning engine oil. The reasons for white smoke from a motorcycle are as follows: 1. Low temperature: It may be due to the engine temperature being too low, resulting in poor atomization of the air-fuel mixture entering the cylinder, or a spark plug in one cylinder not functioning. 2. Water ingress: Water has entered the engine oil. In such cases, the engine's fuel consumption generally increases, and a lack of power may also occur. The production of white smoke from a motorcycle is usually due to the atomization of water, or another scenario where the air-fuel mixture is not burned and is expelled. If white smoke is coming from the exhaust pipe, it could be due to water in the fuel or poor atomization of the air-fuel mixture entering the cylinder. If white smoke is caused by a non-functioning cylinder, a backfire phenomenon may sometimes occur in the exhaust pipe when the engine is warm.

6

4

Share

How to Handle Driver's License Transfer?

The procedure for driver's license transfer is as follows: 1. Required documents: Original ID card and one copy, two one-inch color photos without hats. 2. Fill out forms: Fill out the motor vehicle driver's license application form and submit the driver's license and file, which will be reviewed by the business staff. The staff will unseal the file and check whether the file materials are complete, true and valid. 3. Verification procedures: After inquiry and verification, the transfer procedures will be handled after passing the road driving retest. 4. File retention: Retain the motor vehicle driver's license application form and motor vehicle driver's license registration item form in the original driver's license file. Extended information: Driver's license transfer refers to the procedure of transferring the driver's license to the latest place of residence in order to avoid the trouble of annual review of the driver's license due to job transfer, moving, etc. It can be divided into two types: driver's license transfer out and transfer in.

19

4

Share

Is it serious if the P gear is accidentally engaged while driving?

It is serious and absolutely prohibited, otherwise it may cause severe damage or even total failure of the transmission. Here is the relevant introduction: 1. Automatic transmission P gear lock: When in P gear, there is a locking mechanism inside the transmission that locks the output gear of the transmission, which means the transmission part is locked. If the P gear is engaged while the vehicle is moving, it may cause severe wear of the gears inside the transmission or abnormal noise at best, and damage or total failure of the transmission and transmission part at worst. 2. Correct usage of P gear: It is used for parking, utilizing a mechanical device to lock the rotating part of the car to prevent it from moving. When the car needs to stay in a fixed position for a long time, or before leaving the vehicle after parking, the hand brake should be pulled and the lever should be pushed into the "P" position. It should be noted that the vehicle must be completely stopped before using the P gear, otherwise the mechanical part of the automatic transmission may be damaged.

19

2

Share

How to turn off the rear wiper of Volkswagen Tayron?

The method to turn off the rear wiper of Volkswagen Tayron is to lift the wiper lever upward to turn it off, and press it downward to turn it on. The rear wiper is the wiper on the rear windshield of the car, which is mostly equipped on SUVs, MPVs, hatchbacks, and some liftbacks. Here are some precautions about wipers: 1. Maintain cleanliness: If streaks appear on the windshield, the wiper blade may be dirty. Dip a towel in alcohol and wipe along the edge of the wiper blade to remove accumulated dirt, debris, and dead leaves over time. 2. Check the rubber: If the wiper makes a harsh noise when working, the rubber strip may be aging or cracked. If the wear is not severe, you can sand the rough spots on the surface with sandpaper. 3. Avoid sunlight: High temperature is the enemy of rubber materials and will accelerate the aging of wiper blades. 4. Refill liquid: To prolong the life of the components, be sure to use regular windshield washer fluid.

8

4

Share

Which Cars Do Not Use Asphalt Vibration Damping Sheets?

Modern's older generation Accent does not use asphalt vibration damping sheets. Here is more information about vibration damping sheets: 1. Function: The main functions of vibration damping sheets are to suppress steel plate resonance and efficiently block noise with high density, while enhancing the toughness of the steel plate to improve safety. 2. Sound Insulation Cotton: The primary functions of sound insulation and absorption cotton are to assist in blocking noise with low density and absorbing noise while preventing noise from radiating outward. It has good thermal insulation effects. When pasted inside the car's engine hood, it can effectively prevent the engine's high temperature from directly transferring to the hood, thereby protecting the hood's surface paint and avoiding the hood from steaming up on rainy days, which could affect visibility. Another function of sound insulation cotton is thermal insulation, reducing the heat transmitted from the engine operation to the hood's surface.

7

4

Share

How to Fasten the Middle Rear Seat Belt in the Baojun 510?

Method for fastening the middle rear seat belt in the Baojun 510: 1. For the side seat belts in the rear seats, the method is the same as for the front seat belts. Pull out the seat belt, with the shoulder strap crossing the chest and the lap belt fitting snugly over the hips, then insert it into the buckle. 2. First, the middle rear seat belt may be a two-point lap belt or a three-point seat belt. 3. Method for fastening a three-point seat belt: Generally, the middle rear seat belt is located at the rear roof of the car, where you can see two different types of buckles. There are also two different types of sockets in the middle position, one on the left and one on the right. To use it, pull down the hanging buckle connected to the seat belt from the rear roof, slant it across the chest, and insert the buckle into one of the corresponding sockets. Then, insert the other buckle connected to the seat belt across the thighs into the other socket to complete the process.

17

4

Share

How to check the tire pressure monitoring on Jetta VS5?

Is White Smoke from a Motorcycle Exhaust Pipe Indicative of Burning Engine Oil?

How to Handle Driver's License Transfer?

Is it serious if the P gear is accidentally engaged while driving?

How to turn off the rear wiper of Volkswagen Tayron?

Which Cars Do Not Use Asphalt Vibration Damping Sheets?

How to Fasten the Middle Rear Seat Belt in the Baojun 510?

Can you sleep for several hours with the car windows closed?

Where is the air conditioning filter located in the Kuga?

What Happens If Car Maintenance Is Delayed?

What Causes a Car Door Handle Not to Retract?