How to Check the Tire Pressure Monitoring on Geely Vision X6
4 Answers
Start the vehicle's power supply and press the menu button; switch to the vehicle information menu, which will display as overspeed alarm; Rotate the knob at the top of the left lever to the tire pressure monitoring information, where you can view the tire pressure of all four wheels.
When driving my Geely Vision X6, I want to check the tire pressure monitoring system, which can be easily done via the buttons on the steering wheel. After starting the vehicle, the central screen on the dashboard automatically displays some basic information. At this point, press the left or right button on the right side of the steering wheel to find the menu item with the tire icon, then click in to see the real-time tire pressure values for all four wheels. Under normal conditions, the pressure will be displayed within the green range, such as around 220-250 kPa. If any tire pressure is too low or too high, the system will illuminate a yellow or red warning light. I usually prefer to check the tire pressure every two weeks, especially when the tires are cold for the most accurate reading—wait a few minutes after parking to avoid interference from sunlight. Incorrect tire pressure can lead to increased fuel consumption or unstable driving, so developing this habit is important. If an alarm goes off, don’t ignore it—slow down immediately, pull over, and check the tires for punctures or leaks. Inflate or repair them if necessary, as this is much safer. During long drives, this small routine can save a lot of trouble and fuel costs.
As a seasoned driver with years of experience, the tire pressure monitoring system on the Vision X6 is a lifesaver. I make it a habit to check before every trip. After starting the car, I use the steering wheel buttons to navigate to the tire pressure display menu, where the pressure values are clearly visible on the screen. If any tire falls below the recommended range of 180-200 kPa, an alarm will beep to alert me, prompting immediate action like inflating or changing the tire. Low tire pressure accelerates wear, while excessive pressure reduces grip, increasing the risk of accidents at high speeds—I once had a close call with a potential rollover. That's why I always carry a portable tire pressure gauge to verify readings regularly, ensuring system accuracy. For the most precise check, it's best to stop on level ground rather than operating the system while driving. Maintaining proper tire pressure extends tire life, saves costs, and prevents sudden blowout risks.
When driving the Vision X6, I often use the tire pressure monitoring system to ensure driving safety, and the operation is very simple. After starting the car, turn the left button on the steering wheel to select the tire pressure icon, and the screen will display the pressure value of each tire. Normally, the tire pressure should fluctuate around 240 kPa. If it appears too high or too low, I manually adjust it or take it to the shop for inspection. I also pay attention to the system alerts, which provide additional warnings about air leaks, allowing me to address issues promptly and avoid delays. I make it a habit to check the tire pressure every time I refuel—it takes only a few seconds but can prevent major problems. Proper tire pressure also improves fuel efficiency, saving some money.
