How to Check the Tire Pressure Monitoring in the 10th Generation Accord?

1 Answers
KeiraDella
07/30/25 10:07am
The method to check the tire pressure monitoring in the 10th Generation Accord: Its tire pressure monitoring does not rely on electronic pressure sensors inside the tires but calculates differences in wheel speed to alert about tire pressure. Therefore, the central control screen does not display specific tire pressure values but directly shows the tire pressure monitoring symbol. More details are as follows: 1. The front design of the 10th Generation Accord features an array-style LED light group. The interior adopts a convergent design with a floating central control screen, followed by air vents, air conditioning controls, and a storage compartment below. 2. The 10th Generation Accord has a body length of 4893mm, width of 1862mm, height of 1449mm, and a wheelbase of 2830mm. It is equipped with the Honda SENSING safety system.
Was this review help?
15
4
Share
More Forum Discussions

What is the difference between understeer and oversteer?

The difference between understeer and oversteer is: understeer is insufficient steering, while oversteer is excessive steering. Related introduction: 1. Understeer: Understeer phenomenon refers to when the vehicle is turning, the front wheels lose grip, causing the vehicle to not turn in the intended direction. This situation often occurs in front-wheel-drive vehicles. For example, when trying to make a quick 90-degree turn, the front of the car may only turn 50 degrees. 2. Oversteer: Oversteer refers to the rear of the car, where the rear wheels lose grip during a turn, causing the vehicle to rotate more than intended. This generally occurs in rear-wheel-drive vehicles. For example, when intending to make a 60-degree turn, the car may turn 90 degrees due to rear wheel slippage.
14
4
Share

Why Did Geely Fail to Acquire Technology from Volvo After the Acquisition?

Geely's inability to acquire technology from Volvo after the acquisition can be attributed to the following reasons: 1. Legal Aspects: One factor involves legal constraints. Although Volvo has been acquired by Geely, as of now, Volvo Cars and Geely Auto remain two independent automotive brands. Directly utilizing the other party's core technology without Volvo's permission would constitute infringement. 2. CMA Platform: Geely and Volvo have devised an optimal solution—the CMA platform, jointly developed by both brands. The greatest advantage of this platform lies in the fact that the technologies developed under it do not entail the high maintenance and repair costs associated with Volvo's technologies, while also offering certain improvements over Geely's previous technologies. Therefore, this compromise solution has proven satisfactory for Geely.
1
1
Share

How long does it take to get the license plate after vehicle inspection?

Generally, it takes 5-7 days to get the license plate after vehicle inspection. After the inspection, the owner can go to the new vehicle service hall to complete the relevant license plate registration procedures. The specific time required depends on the region and the flow of people. In some regions with high efficiency and fewer license plate registration users, the license plate can be obtained on the same day, as the production of the license plate only takes half an hour. The following are the precautions for license plate registration: 1. Vehicle certificate is required for license plate registration: When registering the license plate at the vehicle management office, the vehicle certificate needs to be submitted to the staff for archiving. 2. Purchase invoice is required for license plate registration: Whether you buy a car from a 4S store or a car trade company, you will receive a purchase invoice after the purchase. This invoice must be kept properly, as the car cannot be registered without it. When registering the license plate, the purchase invoice needs to be given to the staff at the vehicle management office, and this invoice also needs to be archived.
11
3
Share

Where is the air intake of a sedan located?

The air intake of a sedan is generally located at the front of the engine. Symptoms of a leaking car intake pipe are as follows: 1. Weak engine operation: Since the air entering the engine through cracks in the intake pipe bypasses the air flow sensor, this portion of air dilutes the combustible mixture in the engine cylinders, leading to symptoms of weak engine operation. 2. Increased nitrogen oxide emissions in exhaust: Nitrogen oxides (NOx) in vehicle exhaust are generated in a high-temperature, oxygen-rich environment. An excessively lean combustible mixture further promotes the formation of nitrogen oxides, thereby increasing the emission of vehicle exhaust pollutants.
5
5
Share

Which is the largest used car market in Nanjing?

The largest used car market in Nanjing is the Dagong Used Car Trading Center, located at No. 25-27 Xianyao Road, Qixia District, Nanjing City, Jiangsu Province. Other relatively large used car trading markets include: Nanjing Tiancheng Used Car Trading New Market, Jiangsu Zhongchi Used Car Market, and Nanjing Fangze Used Car Trading Market. Below are methods to check if a used car has been in an accident: 1. Check the production date of the glass: Normally, the glass wouldn't be replaced, so checking the production date can be helpful. The glass date is usually in the format of numbers + dots, where the numbers represent the year and the dots represent the month. 2. Examine the wear and tear on the frame: If the car has been in a major accident, the body frame will show varying degrees of dents and misalignment. Thus, the condition of the frame can indicate whether the car has been in a serious accident. 3. Inspect the screws: Check the screws on the hood, the radiator support, and the door connections. If any of these screws show abnormalities, it's highly likely that the car has been in a major accident. 4. Review the maintenance records: You can check the maintenance records at a 4S shop. Any accident car repaired at a 4S shop will have a system record.
12
1
Share

What documents are required for vehicle file extraction?

Vehicle file extraction requires the following detailed documents: 1. Documents to prepare before vehicle file extraction: Identity proof of the vehicle owner, vehicle registration certificate, vehicle license, proof and voucher of vehicle ownership transfer. 2. Documents required during vehicle file extraction: Obtain a rubbing card and carry the vehicle license, registration certificate, rubbing strip, invoice or transfer ticket to the transfer hall for vehicle valuation. Then, at the window, submit the outbound transfer authorization letter, "Motor Vehicle Transfer Application Form", vehicle license, buyer's ID and 2 copies, registration certificate, vehicle license plate and plate fee, and other relevant documents to receive a receipt. 3. Documents required after vehicle file extraction: After acceptance, the vehicle file will be handed over to the vehicle owner. Upon arrival at the destination, the owner can use the file to complete the transfer-in procedures at the relevant unit.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.