How to Check the Study Hours for Subject 2?

1 Answers
DelPaul
07/29/25 6:24pm
You cannot check the study hours for Subject 2 online; you can only view your study hours on the training machine at the driving school. Here are some precautions for recording study hours during the driver's license test: 1. Maximum of four hours per day: Theoretical study is limited to 4 hours per day. If the study time exceeds 4 hours, it will still be counted as 4 hours. 2. Avoid inactivity for long periods: To ensure students are actively learning, the system will automatically log out and stop timing if no operation is performed within 5 minutes. 3. Proper logout: After completing the training, students should click the "Exit" button in the lower left corner of the pop-up window. Do not close the pop-up window directly, as this may result in the account being locked for 10 minutes, preventing login.
Was this review help?
1
2
Share
More Forum Discussions

How to Remove the Windshield Wiper of Jingyi?

Prepare the necessary tools for removing the windshield wiper: a flat-head screwdriver, a small ratchet, and a 13mm socket. Open the front hood of the car, take out the flat-head screwdriver, and use it to pry off the small black cover of the windshield wiper. Take out the small ratchet, attach the 13mm socket, and remove the nut that secures the windshield wiper. Fold the windshield wiper by hand, hold it firmly, and shake it repeatedly until it loosens, then remove the wiper.
9
1
Share

How to Install CarPlay if the Original Vehicle Doesn't Have It?

Add a CarPlay module to the original vehicle's infotainment system, which comes in wired and wireless versions. It's simple, convenient, doesn't damage any original wiring, and is cost-effective. Replace the entire original infotainment system. This method is only recommended for original systems, as it may damage the original infotainment system and wiring. Use an adapter to enable CarPlay functionality, but you need to choose the right one based on your vehicle's infotainment system. Whether to install CarPlay depends on personal needs, and it should be done with minimal damage to the original wiring.
17
4
Share

How to Turn on the Heater in a Haval M6?

After starting the car, it takes approximately 6 to 8 minutes for the water temperature to rise to the normal level. At this point, you can turn on the heater. Adjust the air conditioning's circulation mode to internal circulation and switch to the heater mode, indicated by the red zone. Set the air conditioning to a suitable temperature level, generally above 25 degrees Celsius, and adjust the air vent direction upwards.
9
4
Share

How to Replace the Battery When the Key Battery is Low?

First, prepare the tools: a small flat-head screwdriver, the car key, and the compatible electronic battery for the car key. There is a button on one side of the car key; pressing it allows you to pull out the mechanical key. Insert the flat-head screwdriver into the "open" position at the front end of the key. Separate the car key into two halves, then use the flat-head screwdriver to pry out the battery. After removing it, place the new battery in the correct position, ensuring the ± poles are properly aligned. After installing the battery, press the two halves back together, then insert the mechanical key to complete the assembly.
6
3
Share

How to Delete Bluetooth Devices When Honda XRV's Bluetooth Memory is Full (6 Devices)?

Press the MENU button below the display, rotate the LIST button downward to enter settings (do not click confirm). Press the dial button below the steering wheel, then press the list button to select "No" as confirmation. Enter phone settings, then enter Bluetooth settings, and press the list button again. Scroll down the page to find "Delete Device," locate the Bluetooth device you want to delete, and click the list button. Press the list button again to delete that Bluetooth pairing information.
18
5
Share

How to Replace the Wiper Blades on a Volkswagen Tiguan?

After turning off the vehicle, do not remove the key immediately. Within 3 seconds, pull the wiper control lever inward, and the wiper blades will move to the maintenance position. Apply slight force to pull the wiper blade toward the front of the car. When pulled to a certain position, it will lock firmly in place. Press the silver button on the wiper arm, hold the wiper blade with your hand, and gently pull it outward to remove the old rubber strip. When installing the new rubber strip, remember to stagger the two metal pieces and ensure it is inserted into the first groove. Once the rubber strip is successfully installed, follow the reverse steps of the removal process to complete the wiper blade installation.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.