How to Check the Remaining Engine Oil Level in a Car?
2 Answers
To check the amount of engine oil in a car using the oil dipstick, follow these steps: 1. Under cold engine conditions, park the car on level ground, open the hood, and pull out the oil dipstick to inspect. 2. Evaluation standard: The oil level should be between the upper and lower marks on the dipstick. If the dipstick shows the oil level below the minimum mark (Min), it is necessary to promptly add engine oil of the same specification; otherwise, it may cause vehicle malfunctions. 3. Functions of engine oil: Engine oil serves to lubricate and reduce friction, clean and disperse contaminants, cool and lower temperature, seal and prevent leaks, prevent corrosion and rust, and cushion shocks.
As a long-time driving companion, I'll tell you that checking the oil level isn't complicated. Park on level ground and turn off the engine, then wait five to ten minutes for it to cool down—this ensures safer and more accurate readings with lower oil temperature. Open the hood, locate the dipstick with a yellow or red ring, and gently pull it out. Wipe off the old oil residue with a clean cloth, reinsert it firmly all the way back in, then quickly pull it out again to check the oil level markings. The dipstick has two notches or dots indicating the minimum and maximum levels; ideally, the oil film should be between them. If it's too low, add the same type of oil, but avoid overfilling, as it could damage the engine. I recommend checking every two to three weeks or before long trips to develop a habit that prevents major repairs. Don’t forget to wear gloves to avoid burns or oil stains—it's a simple process, but it affects your car's health and your wallet.
