···
Log in / Register

How to Check the Reasons for Failing Subject 2 in 12123?

3 Answers
CassidyMarie
08/31/25 7:45am
You can only see where you lost points on the form you signed when leaving the examination room after failing Subject 2. Below are specific techniques for the driving test Subject 2: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. Ensure the vehicle doesn't stop while keeping the speed as slow as possible. A slower speed allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting in the car, make sure to adjust the rearview mirrors properly, which is especially important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, reference points on the car, and reference points on the ground. During Subject 2 operations, it's essential to accurately identify and observe these points to ensure precise execution.
Was this review help?
6
1
Share
JessicaRose
09/13/25 4:02am
After failing the second subject last month, I specifically checked the reasons using the Traffic Management 12123 APP, which I found quite convenient. Open the APP on your phone, log in to your account, navigate to the driver's license services section, click on exam services, and you can see detailed scores and comments. For example, I crossed the line during reverse parking, and the coach reminded me to pay more attention to the marker positions next time. If you don't have the APP, you can also directly ask the front desk of the driving school if they have records in their system, or go to the vehicle management office to check the exam sheet, which will list the deduction points and reasons for mistakes. Only after checking did I realize my shortcomings. Later, I practiced parallel parking several more times and finally passed the retake. I suggest friends who failed to check early and review targeted areas, don't lose heart.
Was this review help?
10
0
Share
Expand All
VonGavin
10/27/25 4:49am
The day I failed the driving test (Subject 2), I immediately thought about how to check the reasons when I got home. First, I checked on the Traffic Management 121 APP—it's quite simple: after logging in, go to the exam inquiry menu, enter the test time, and the score and failure details will pop up. For example, my engine stalled during the hill start and exceeded the time limit, so next time I need to pay attention to stepping on the accelerator more steadily. If that doesn’t work, I can always visit the driving school or the vehicle management office with my ID card to ask the staff. Checking the reasons is crucial—it helps avoid making the same mistakes in the next test. Usually, I should practice more to get a better feel for steering wheel control and just stay calm.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Why is the new Qashqai so bumpy?

The reasons for the new Qashqai: loose suspension components, inaccurate four-wheel alignment. Loose suspension components: When the vehicle experiences unexplained bumps, the first suspicion should be whether the car's suspension components are loose or worn. Generally, vehicles that have been used for a certain period are more prone to suspension aging, leading to a bumpy ride. Inaccurate four-wheel alignment: Next, check the vehicle's four-wheel alignment. This issue is more common in vehicles with higher mileage. Therefore, when experiencing slight bumps, a four-wheel alignment should be performed, and it is essential to inspect the suspension, tire pressure, front wheel bearings, and other components.
7
0
Share

Why does the Audi's right front wheel make noise when braking?

Audi's right front wheel making noise when braking may be due to the power steering belt of the left front wheel; replacing the belt could solve the issue. Another possible cause of noise could be the brake pads or a deformed metal piece behind the brake disc rubbing against it. Other reasons: There are many reasons for front wheel noise, such as rhythmic sharp sounds, which might be caused by the brake pads being too close to the brake disc, creating friction. Continuous sharp sounds could indicate bearing damage, while continuous dull sounds might suggest a problem with the drive shaft. Normal phenomenon: Some noises do not affect driving but are merely uncomfortable to hear, such as interior rattles, which are usually caused by loose panels rubbing against each other.
15
5
Share

Why can't my phone charge in the Audi Q2L?

Audi Q2L phone charging failure can be divided into two situations: connecting the phone via the USB port with no charging display; or connecting the phone via the USB port with a charging display, but the phone doesn't actually charge. No charging display on the phone: The vehicle's USB port fuse may be blown (check the corresponding fuse in the vehicle manual and replace the spare fuse if it's melted). The phone's charging port spring may be loose, causing poor contact. Charging display appears, but phone doesn't charge: If this occurs, it indicates that the USB port is only for reading USB drive data, not for phone charging. Check the USB port's application scope in the vehicle manual.
4
0
Share

What Causes the Exhaust Brake Indicator Light to Illuminate?

Exhaust brake indicator light illumination indicates that the exhaust brake system is currently engaged. If you wish to discontinue using the exhaust brake, it can be manually deactivated. Below are relevant details about exhaust brakes: 1. Auxiliary Function: The exhaust brake primarily serves an auxiliary role in vehicles. When the driver presses the brake pedal or clutch pedal during driving, the exhaust brake indicator light will illuminate and extinguish upon release. 2. Precautions: It's important to note that when driving on slippery road surfaces, the use of exhaust brakes should be minimized. Employing the exhaust brake assist system may cause vehicle skidding, which poses significant safety risks.
9
5
Share

What causes high low pressure but normal high pressure in the new Santana's air conditioning system?

New Santana's air conditioning system showing high low pressure but normal high pressure is caused by a faulty or damaged expansion valve. Automotive air conditioning system: The automotive air conditioning system is a device that cools, heats, ventilates and purifies the air inside the vehicle compartment. It provides a comfortable environment for passengers, reduces driver fatigue, and improves driving safety. The air conditioning system has become one of the indicators for measuring whether a car is fully equipped. Normal pressure values: The normal high pressure of an automotive air conditioning system should be 1.3-1.7MPa (13-17kg/cm2 or Lbf/in2). The normal low pressure should be between 0.1-0.25MPa (1-2.5kg/cm2 or 15-35Lbf/in2).
7
3
Share

Do New Energy Vehicles Come with Free Charging Stations?

Purchasing a new energy vehicle generally does not include a free charging station. Here are some considerations regarding new energy vehicle charging stations: 1. Using public charging stations: If you don't have a private parking space at home, you can only opt for these shared charging stations. You can install a charging app on your phone to locate charging stations and charge your vehicle. Typically, the cost of using these shared charging stations is slightly higher than the electricity cost of owning a personal charging station. 2. Scheduling installation: If you have a private parking space at home, you can install your own personal charging station. When purchasing the vehicle, you can buy a wall-mounted charging gun, and the manufacturer will arrange for professional installers to set it up. Before installation, it's crucial to confirm with your property management whether they permit the installation of a charging station. Purchasing the charging station only after obtaining confirmation is the safest approach.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.