How to Check the Production Date of Mercedes-Benz Glass?

What are the standards for reverse parking?

The standards for reverse parking are as follows: Failure to follow the prescribed route sequence, disqualification; Vehicle body crossing the line, disqualification; Failure to fully enter the parking space, disqualification; Before reversing, if both front wheel contact points do not exceed the control line, disqualification; Exceeding the 210-second time limit for the task, disqualification; Stopping for more than 2 seconds mid-process, 5-point deduction per occurrence. The passing area for the Subject 2 garage is 16 meters in length and 6.83 meters in width. The garage dimensions are 5.25 meters in length and 2.31 meters in width. Students must refer to the ground markings and operate the vehicle in the prescribed route sequence to correctly enter and exit the garage from both sides of the test area. Only after both front wheel contact points exceed the control line at one end of the road can the vehicle proceed to reverse into the garage for parking; then move forward to exit the garage and proceed toward the control line on the other side of the road, stopping once both front wheel contact points exceed the control line, then reversing into the garage again for parking; finally, exit the garage and return the vehicle to the starting position, leaving the test area. Except for parking in the garage, no stopping is allowed during the process. The vehicle body must not cross the line. The task must be completed within 210 seconds. During the reverse parking operation, the driving speed should be controlled, using first gear or reverse gear at idle speed throughout, maintaining consistent speed from start to finish. After controlling the steering timing, observe carefully during the reversing process, grasp the key points of steering, and turn the wheel at the appropriate time. Additional extended information is as follows: U-turn reversing: U-turn reversing should be performed in areas where U-turns are permitted (such as highways, intersections, street entrances, etc.), and should be based on the width of the road and the density of vehicle traffic. When performing a U-turn reverse on a wider road, the position of the rear of the vehicle or the wheels on the road can be judged directly from the rearview mirror. On narrow roads, if the position of the rear and rear wheels cannot be accurately judged from the rearview mirror, open the door and observe the rear wheels while operating. If multiple forward and reverse movements are needed, step out to check the safe distance between the road and the wheels to prevent falling into a ditch. In areas with high vehicle traffic density, a person should be assigned to direct the operation. When performing a U-turn reverse at an intersection or street entrance, appropriately expand the visibility and range behind the vehicle, accurately judge the movements of passing vehicles, pedestrians, and bicycles, and reverse cautiously to prevent accidents. Garage reversing: Garage reversing is generally performed when the vehicle returns to the parking garage or enters a temporary parking lot for parking. For vehicles with good visibility (such as light buses, cars, large buses, etc.), the reversing can be judged directly by observing through the rear window. If visibility is poor and the rear cannot be seen clearly (such as fully loaded trucks, etc.), open the door and judge the position of the vehicle body in the garage from one side, while observing the other side of the vehicle body from the rearview mirror to prevent scraping the vehicle or other vehicles. Turning reversing: When performing a turning reverse, the driver should pay attention to judging the situation on the inside of the turn and behind the vehicle, observe both sides of the vehicle body from the rearview mirror, and pay attention to the timing of turning the steering wheel to prevent rear-end collisions and vehicle body scrapes. Shifting reversing: This is generally performed when entering a narrow parking space or when needing to shift left and right to avoid oncoming traffic on a narrow road. This method sometimes requires multiple reversals, so be careful about the width of the shifted position, and judge the position of the rear of the vehicle, both sides of the vehicle body, and the rear wheels to prevent collisions, scrapes, or falling into ditches. If necessary, have someone direct the operation from behind the vehicle.

13

1

Share

Location of Sagitar Windshield Washer Fluid

The location of the Sagitar windshield washer fluid is on the lower right side of the engine compartment. Below is a detailed introduction to the Sagitar: 1. Interior: The dashboard is entirely wrapped in soft materials. 2. Features: Includes cruise control, sunroof, keyless entry/start, four-way adjustable leather steering wheel, leather seats, lumbar support adjustment, cornering lights, heated mirrors, etc. The chassis feels solid, heavy, and resilient. 3. Fuel Consumption: The 1.4T model has a combined fuel consumption of around 7L per 100km, which can drop below 6.5L on highways, making it an excellent performer overall.

19

2

Share

How to Identify Genuine Burmester Car Speakers?

Burmester car speakers can be identified by their welding craftsmanship and built-in magnets. Here are the relevant details: 1. Differences: Genuine German Burmester speakers have square-shaped strong neodymium magnets at the back, with a hollow design in the center; the speaker terminals of Burmester are flat in design and feature excellent welding craftsmanship. 2. About Burmester: Burmester, founded in 1978, rapidly rose in the German High-End audio industry. It has now become one of the world's most respected manufacturers of high-quality stereo systems.

3

0

Share

What does FM mean in a car?

FM in a car refers to the frequency modulation band in the car audio system's radio function. Below is a related introduction to car audio equipment: 1. Audio source: The mechanism that can decode software and multimedia is called the audio source. 2. Power amplification mechanism: The sound signal strength controlled by the pre-stage is mostly only a few volts, which is not enough to drive the unit. Therefore, the signal must be given some 'power boost' to make the signal stronger, so that it can be calculated in watts (W). The mechanism that strengthens the signal into power output is called the power amplifier, commonly known as the amp.

18

2

Share

What is the fuel consumption of the new generation Hongqi HS5?

The fuel consumption of the new generation Hongqi HS5 is 10.7 liters, which indicates good fuel efficiency. Below is a detailed introduction about the vehicle's fuel consumption per 100 kilometers: Overview: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when driving 100 kilometers at a certain speed on the road. It is a theoretical indicator for the vehicle. The fuel consumption per 100 kilometers is measured by manufacturers under objective conditions using a dynamometer installed on the vehicle's chassis, converting the obtained values into speed parameters, and then calculating the theoretical experimental fuel consumption data per 100 kilometers for the model at specified speeds. Others: Since most vehicles approach their most economical speed at 90 kilometers per hour, the theoretical fuel consumption figures publicly released are usually the fuel consumption per 100 kilometers at 90 kilometers per hour.

4

2

Share

Can installed navigation lights pass the annual vehicle inspection?

Installing navigation lights cannot pass the annual vehicle inspection. Adding navigation lights to a vehicle is considered unauthorized modification of vehicle lighting, which is not permitted. According to the Road Traffic Safety Law, unauthorized modification of vehicle lighting is subject to penalties. The function of navigation lights: The purpose of navigation lights is to make the vehicle more noticeable during daytime driving. Their effect is not to help the driver see the road better but to alert others that a vehicle is approaching. Therefore, these lights are not for illumination but serve as signal lights. The main goal of daytime running lights is to enhance traffic safety. Precautions: When driving normally on the road, traffic police will penalize vehicles with unauthorized navigation lights. If you insist on having navigation lights on your car, you can purchase a model that comes with them from the factory, as this is a legal practice.

2

3

Share

How to Check the Production Date of Mercedes-Benz Glass?

What are the standards for reverse parking?

Location of Sagitar Windshield Washer Fluid

How to Identify Genuine Burmester Car Speakers?

What does FM mean in a car?

What is the fuel consumption of the new generation Hongqi HS5?

Can installed navigation lights pass the annual vehicle inspection?

How long should the engine be turned off in traffic jams

What are the methods to deal with rust spots on car paint?

Bumper Damaged: Replace or Repair with Paint?

What are the tips for selecting reference objects when driving in a straight line?