How to Check the Production Date of Mercedes-Benz Glass?

How to Check the Average Fuel Consumption in the Excelle?

Method to check the average fuel consumption in the Excelle: The Buick Excelle has a rotary knob at the left end of the turn signal lever. By default, the instrument cluster's trip computer display shows the trip mileage. In the default state, rotating the knob backward displays the average fuel consumption, while rotating it forward shows the instantaneous fuel consumption. Rotating this knob also allows you to view the remaining fuel range, average speed, and other information. The Excelle is the fourth model produced under General Motors' new global platform, following the new Regal, new LaCrosse, and Enclave. The Buick Excelle is derived from the Opel Astra and is based on GM's global Delta platform. Body dimensions: The Excelle measures 4609 mm in length, 1798 mm in width, and 1464 mm in height, with a wheelbase of 2640 mm.

6

4

Share

How to Turn Off the Air Conditioning in the Tayron?

To turn off the air conditioning in the Tayron, you can either rotate the knob all the way to the left to shut it off, or press the menu button below the AUTO button on the air conditioning panel. This will bring up the air conditioning control interface on the central display screen, where you can find the OFF button in the lower-left corner—simply click it to turn off the system. The Tayron is a mid-size SUV under FAW-Volkswagen, featuring a 5-door, 5-seat SUV body structure. Its dimensions are 4589mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm. It is powered by a 1.4T inline-four turbocharged engine producing 150 horsepower, and its suspension system combines a MacPherson strut front suspension with a multi-link rear suspension.

7

0

Share

What is EV?

EV stands for pure electric vehicle, which is one of the two common models of new energy vehicles. One is the pure electric vehicle, abbreviated as EV; the other is the plug-in hybrid electric vehicle, abbreviated as DM. Pure electric vehicles are driven by electric motors, which are powered by the battery pack. The characteristic of EV is that it can only be replenished by charging. Electric vehicles do not have an engine, but instead use an electric motor, battery, on-board charger, storage battery, control device, etc. They use charged battery power instead of gasoline to drive the vehicle. Since they are not equipped with a gasoline engine, they do not emit any exhaust gas during driving. Compared with gasoline vehicles, EVs have lower noise and vibration levels.

11

3

Share

How to Adjust the Height of Car Lights?

Methods to adjust the height of car lights: 1. If there is a headlight height adjustment button inside the car, simply use the button to adjust. The location of the adjustment button may vary depending on the car model. 2. If there is no headlight height adjustment button inside the car, you need to open the engine hood and adjust through the headlight assembly, also known as mechanical adjustment. If you are unsure how to do this, it is recommended to visit a 4S shop or a professional auto repair shop and have a technician adjust it for you. There are also corresponding standards for car light height: 1. Drive the car onto a flat road, adjust the near light point to a 30-meter distance with the two points overlapping, and adjust the far light point to be parallel to the ground. 2. Find a person about 180 cm tall to stand in front of the car, 7.6 meters away. Turn on the near light, and the light should be just above the knees and below the hips. If it is above the hips, it is considered too high and needs to be lowered.

14

0

Share

How to switch between D gear and S gear while driving?

Switching between D gear and S gear while driving can be done without pressing the brake pedal; simply shift directly. D gear is the drive gear, also known as the forward gear, used for normal forward driving. S gear is the sport mode driving gear, primarily used to enhance driving pleasure by increasing RPM and delaying gear shifts, or for short-term overtaking. The transmission will automatically select a different gear ratio, which can be simply understood as directly lowering one gear. Most automatic transmission vehicles have six gear positions, arranged from top to bottom as: P, R, N, D, S, L. Commonly used automatic gear positions include Park (P), Reverse (R), Neutral (N), and Drive (D).

8

3

Share

Can lane changes be made on dashed lines?

When there is a solid line in the center with dashed lines on both sides, lane changes are permitted. Below is a partial introduction to road driving rules: 1. According to the "Motor Vehicle Management Regulations," white lines are used to distinguish different lanes in the same direction: (1) Dashed lines allow lane merging and lane changes. (2) Solid lines prohibit lane merging and arbitrary lane changes. 2. When approaching an intersection without traffic signals, signs, markings, or police direction, vehicles should slow down and yield to pedestrians and vehicles with the right of way.

9

2

Share

How to Check the Production Date of Mercedes-Benz Glass?

How to Check the Average Fuel Consumption in the Excelle?

How to Turn Off the Air Conditioning in the Tayron?

What is EV?

How to Adjust the Height of Car Lights?

How to switch between D gear and S gear while driving?

Can lane changes be made on dashed lines?

How to Install a Car Sun Visor?

Can I directly apply for a B2 driver's license?

What does a car night vision system mean?

What does 'off' mean on a Volkswagen car?