How to Check the Production Date of Goodyear Tires?

1 Answers
OStella
07/29/25 10:12pm
Goodyear tire production date can be checked on the sidewall of the tire. The 11-digit number and letters immediately following the "DOT" letters indicate the tire's production date, with the last four digits of the serial number representing the production date. The tire production date code format is as follows: the first two digits indicate the production week, and the last two digits indicate the production year. For example, 1204 means the tire was produced in the 12th week of 2004. The Goodyear Tire & Rubber Company, founded in 1898, is one of the world's largest tire manufacturing companies, headquartered in Akron, Ohio, USA. The company produces tires, engineered rubber products, and chemical products in factories across multiple countries.
Was this review help?
16
4
Share
More Forum Discussions

What type of engine oil should be added to a BMW X5?

BMW X5 requires 0W40 or 5W40 engine oil. Engine oil, also known as engine lubricant, consists of base oil and additives. Taking the 2020 BMW X5 Premium model as an example, it is a mid-to-large-sized SUV with the following dimensions: length 4930mm, width 2004mm, height 1776mm, wheelbase 2975mm, and a fuel tank capacity of 83 liters. The 2020 BMW X5 Premium is equipped with a 3.0L turbocharged engine, producing a maximum torque of 450Nm at 1500-5200rpm and a maximum power output at 5500-6500rpm.
6
0
Share

How Many Kilometers Should a Car's Timing Belt Be Replaced?

Car timing belts should be replaced approximately every 60,000 to 80,000 kilometers. Situations requiring timing belt replacement include: 1. The car lacks power and struggles to accelerate when climbing hills; 2. The engine shakes severely at idle; 3. The exhaust pipe makes a popping sound when accelerating; 4. There is a knocking sound inside the engine when starting; 5. Cracks or wear appear on the timing belt. The car timing belt is a crucial component of the engine's valve system, made of rubber. Its function is to ensure the accuracy of intake and exhaust timing, synchronize the engine's ignition with cylinder movement, and maintain smooth power output from the engine.
19
2
Share

How to replace the turn signal bulb of Sail?

Methods to replace the turn signal bulb of Sail: 1. Open and secure the car hood; 2. Locate the turn signal above the black wiring harness assembly; 3. Twist the turn signal counterclockwise with force to remove it; 4. After disassembly, replace it with a new bulb. Taking the 2018 Sail Manual Comfort Sunroof version as an example, its body dimensions are: length 3947mm, width 1690mm, height 1503mm, with a wheelbase of 2465mm. The 2018 Sail Manual Comfort Sunroof version is equipped with a 1.3L naturally aspirated engine, delivering a maximum horsepower of 103PS, maximum power of 76kW, and maximum torque of 127Nm.
4
4
Share

What is the function of DSC in a car?

The function of DSC in a car is: it can provide good handling performance during high-speed driving, prevent the car from fishtailing or drifting during driving, and improve the stability of the car body. DSC is the Dynamic Stability Control system, which is a further extension of the acceleration slip regulation or traction control system to ensure driving stability. The working principle of DSC in a car is: when the car enters a curve at high speed or avoids obstacles in an emergency, the dynamic stability system receives signals of wheel angle and vehicle lateral acceleration from sensors, and through the system's judgment and analysis, applies a certain braking force to a specific wheel to prevent accidents.
14
1
Share

Does Parking in Gear Damage a Manual Transmission Car?

Parking a manual transmission car in gear does not cause damage. If the driver engages a gear while parking to prevent the vehicle from rolling, it will not harm the car. Similarly, practicing gear shifts while parked will not damage the transmission. However, if a gear cannot be engaged during practice, avoid forcing it, as this may harm the transmission's control mechanism. The control mechanism of a manual transmission consists of the gear lever, cables, shift forks, and synchronizers. Manual transmissions rely on synchronizers to select gears. The driver operates the gear lever, which then uses cables to control the shift forks. These forks, in turn, manipulate the synchronizers to engage the desired gear.
20
1
Share

What is the correct way to drive over speed bumps?

The correct way to drive over speed bumps is to reduce speed before approaching them, then slowly pass over with both wheels perpendicular to the bump. This method allows both left and right wheels to contract simultaneously, with the ground force equally shared by both wheels' springs and shock absorbers. Even force distribution helps minimize damage to the vehicle. Incorrect methods for crossing speed bumps include: 1. Driving with only one side's tires over the bump; 2. Passing at high speed; 3. Crossing diagonally. Speed bumps, also known as speed humps, are specialized traffic safety installations on roads designed to reduce the speed of motor vehicles and non-motor vehicles.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.