How to Check the Oil Level of a 2018 XC60?
4 Answers
2018 XC60 oil level can be directly checked through the car's dashboard. Below is a detailed introduction on how to check the oil level of an XC60: 1. After turning off the car for a while, switch the car to the power-on state, access the driving computer menu, and under the engine oil level directory, you can check the current engine oil level of the car. 2. To check the car's engine oil level, you can also use the engine oil dipstick. The first task is to open the car's engine hood and locate the position of the engine oil dipstick. The engine oil dipstick is usually located near the engine, either on top or on the side. The dipstick has a distinctive feature—a pull ring, making it very easy to identify. 3. When using the engine oil dipstick to check the oil level, ensure the car is parked on a level surface. It is best not to place it on a slope; a level surface will provide more accurate results. It is important to note that the engine oil level should be within a reasonable range. Overfilling the engine oil can affect the normal operation of the crankshaft, not only increasing the car's fuel consumption but also potentially impairing the engine's performance.
Checking the oil level is crucial for engine health. My 2018 XC60 doesn't have a traditional dipstick, relying entirely on the electronic system. After starting the vehicle, let the engine idle for a few minutes to reach operating temperature, then turn it off and wait another 10 minutes for it to cool down. Then, use the left steering wheel button to access the menu, select vehicle information, find the oil level option, and press confirm to wait for the screen to display the oil level. If it's between min and max, it's safe; if it's low, you need to add oil—don't delay to avoid engine wear. I make it a habit to check every two weeks, aligning with the oil change cycle, ensuring the use of the specified 0W-20 oil; otherwise, the system might give false readings. Remember to park on level ground, or the reading won't be accurate. Checking before driving saves both peace of mind and money.
Having driven the XC60 for several years, I know that checking the engine oil is not something to be taken lightly. The 2018 model features an electronic oil dipstick design, which is quite convenient: start the car and drive for a bit, turn it off and wait a moment, then enter the settings on the dashboard to check the oil level. If it shows normal, you're good. If it's low, add some oil, but don't just do it blindly—make sure to use the correct 0W-20 oil to avoid affecting performance. I often check it in the morning before heading out, as it's more accurate when the engine is cold. Regularly monitoring the oil level can prevent small issues from becoming big ones, such as avoiding low oil pressure damaging the pistons. Also, after washing the car or when it rains, wipe the dashboard clean to prevent moisture from causing false alarms on the screen. Safety first—just develop good checking habits.
Checking the XC60's engine oil is quite simple, and my 2018 model's electronic system is a big help. Start the engine to warm it up, then turn it off and wait a few minutes for it to cool slightly. Use the steering wheel buttons to navigate the menu to the vehicle information section, locate the engine oil level option, and open it. If the indicator on the screen is between min and max, it's okay. If it's below min, you need to add oil; if it's too high, there might also be an issue. I often remind myself to check regularly and not wait for the warning light to come on. It's important to park on level ground, and use the recommended 0W-20 oil that meets the standards. Remember, don't rush when the engine is hot—it can burn your hand or give inaccurate readings. Newcomers shouldn't worry; you'll get the hang of it after a few tries.
