···
Log in / Register

How to Check the Oil Level in a Porsche Macan?

1 Answers
LaAniyah
09/04/25 7:48am
Porsche Macan does not have an oil dipstick. The oil level can be viewed on the instrument panel using the vehicle computer selector lever. Navigate to the vehicle section in the instrument display to find the oil level. More details are as follows: 1. Oil level measurement is performed under the following conditions: vehicles that are being driven and have traveled over 50km, as well as vehicles with a warm engine (oil temperature above 65°C), parked on a level surface (engine off for more than 120 seconds) with the ignition switch turned on. 2. After opening the hood, the oil level will be reset. When the engine hood is closed, the oil level can be measured immediately. Prerequisite: oil temperature above 65°C and the engine off for more than 120 seconds. If these prerequisites are not met, the multifunction display will show the message "Oil-level-available-only-after-short-time/distance". 3. If the vehicle is started immediately after opening the engine hood without meeting the conditions, you must drive at least 15km or turn off the engine for 2 minutes with the ignition switch on when the engine reaches operating temperature (oil temperature above 70°C) to check the oil level on the multifunction display. 4. The difference between the minimum and maximum marks is 1.5L. If the oil level indicator malfunctions, the multifunction display will show the message "Failure-Oil-level-measurement". The oil level indicator will no longer display a sector but a continuous bar. If a "min" (minimum oil level) warning is displayed, it also includes an indication of the maximum amount of oil that can be added.
Was this review help?
5
1
Share
More Forum Discussions

How fast can a 48v240w motor run?

48v240w motor can run at 60 kilometers per hour. The following is a detailed introduction about the motor: Introduction: Motor refers to an electromagnetic device that realizes the conversion or transmission of electric energy according to the law of electromagnetic induction. The motor is represented by the letter M (the old standard uses D) in the circuit, and its main function is to generate driving torque, which serves as the power source for electrical appliances or various machinery. The generator is represented by the letter G in the circuit, and its function is to convert mechanical energy into electrical energy. Principle: The working principle of the motor is to convert the alternating electromotive force induced in the armature coil into a direct current electromotive force when it is drawn out from the brush end through the commutation effect of the commutator and the brush.
7
2
Share

Can the ETC card still be used after being unplugged?

etc card can still be used after being unplugged. For ETC cards without financial functions, they can be inserted into the ETC electronic tag. ETC cards with financial functions do not need to be placed in the ETC device when not in use to avoid unnecessary losses. ETC is an electronic toll collection system for automatic toll collection on highways or bridges. Pulling out and reinserting the ETC card twice activates the Bluetooth function of the ETC electronic tag, which is only used during top-up. Generally, the Bluetooth function remains active for 2 minutes, so please complete the corresponding top-up as soon as possible. If the device cannot activate the Bluetooth function, you can press the button on the top of the ETC device to turn on the Bluetooth function.
14
1
Share

How to Activate Hidden Features on the Sagitar?

The method to activate hidden features on the Sagitar is: 1. Press the brake pedal. 2. Press the one-touch start button inside the car. At this point, you can see the dashboard light up, and the vehicle's power is turned on. 3. Pull the window lift to the highest point and press the door lock button for 10 seconds. Introduction to the Sagitar: 1. The Sagitar is a compact 4-door, 5-seater sedan under FAW-Volkswagen, with dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, and a wheelbase of 2731mm. 2. The Sagitar has a top speed of 200 km/h, is equipped with a 5-speed manual transmission, and has a trunk capacity of 553L.
18
4
Share

What is the appropriate engine RPM for vehicle starting?

Vehicle starting engine RPM is appropriate at around 1200 to 1500 revolutions per minute. RPM refers to the number of revolutions an object makes around a circular path per unit time. Its functions are: 1. To promptly reflect the operating condition of the engine; 2. To allow drivers to better coordinate with transmission gears and throttle position; 3. To maintain the vehicle in optimal working condition; 4. To reduce consumption and prolong engine lifespan. The significance of automobile engine RPM is: The level of engine RPM relates to the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with different RPMs. The vehicle tachometer is located on the instrument panel, symmetrically placed with the speedometer.
17
5
Share

Is It Normal for Headlights to Have Moisture?

It is not normal for headlights to have moisture. The reasons for moisture in headlights include: 1. The car has been driven through water or in rainy conditions; 2. High-pressure water guns were used to clean the car; 3. Cracks in the headlight's sealing cover; 4. Aging of the lamp cover rubber; 5. Detachment of the vent cap, vent tube, or breathable membrane; 6. Cracks in the welding between the headlight and the lamp housing. Methods to deal with moisture in headlights are: 1. Remove the headlight dust cover to allow quick evaporation of the moisture inside; 2. Turn on the headlights for about 30 minutes to increase the internal temperature and speed up the evaporation of small water droplets; 3. Use an air gun to blow air into the headlights, which can accelerate the removal of fog and moisture.
13
2
Share

What Causes Steering Wheel Vibration After Tire Replacement?

The reason for steering wheel vibration after tire replacement is: When a car's tires are replaced, it's impossible for each tire to have perfectly uniform weight distribution. At high speeds, this can cause the wheels to become unbalanced, leading to vehicle drift and steering wheel vibration. Therefore, after every tire replacement, the vehicle needs wheel balancing to effectively solve the steering wheel vibration issue. Tires are one of the most important components of a vehicle, and their functions include: 1. Absorbing shocks during driving; 2. Ensuring good comfort and smooth ride; 3. Maintaining excellent traction between wheels and road surface, improving vehicle traction, braking, and off-road capability; 4. Supporting the vehicle's weight.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.