
Tucson's method for checking the oil dipstick is: First, pull out the dipstick from the engine compartment, then wipe the oil clean to observe the positions of the MIN and MAX marks on the dipstick. Reinsert the cleaned dipstick back into the engine compartment, then pull it out again. Check the oil adhering to the end of the dipstick. Generally, if the oil level is between the MIN and MAX marks, it's in the ideal position. The Tucson is equipped with a 1.5L turbocharged engine delivering a maximum horsepower of 200ps, paired with a 7-speed dual-clutch transmission. It features a MacPherson strut front suspension and a multi-link independent rear suspension.

Want to check the Tucson's oil dipstick? I've done this many times. First, park the car on level ground, turn off the engine, and wait about ten minutes for the oil to flow back into the oil pan—otherwise, the oil level won't be accurate. Then, open the hood and look for the orange handle at the front of the engine—that's the oil dipstick. Be careful when pulling it out; the dipstick has MIN and MAX markings. The first thing to do is wipe the dipstick clean, especially any oil residue, using a cloth or paper towel. After wiping, fully reinsert it, wait a few seconds, then pull it out again to check the oil level—it should be between MIN and MAX. If it's below MIN, you'll need to add oil. I usually recommend using oil that matches the engine model, like 5W-30, and avoid overfilling to prevent spills. While checking, also inspect the oil quality: clean golden color is normal, while dark or foamy oil means it's time for a change. Don’t forget to secure the hood properly and check the oil every two weeks to avoid costly repairs—safety first.

I remember when I first started driving the Tucson, I was always worried about not having enough engine oil and damaging the engine. Later, I learned a smarter way to check it, which is super simple. After turning off the engine and ensuring the car is stable, wait a few minutes, then open the hood. You can easily spot the small orange handle. Pull it out, wipe it clean, fully reinsert it, then pull it out again. Carefully check that the oil mark is ideally in the middle of the scale. If it's below MIN, quickly add some oil, but don't exceed MAX to prevent smoke. I prefer using the recommended oil brands, such as the manufacturer-specified model, to avoid mixing different types. After checking, don't forget to close the hood. Make it a habit to check the oil level before each refueling—it saves trouble and prevents breakdowns on the road. Too little oil might indicate a leak or oil burning, and checking the dipstick can help detect minor issues early. Another tip: wear gloves to avoid oil stains, and don't do this when the engine is hot to prevent burns.

As a Tucson owner, checking the dipstick is routine for me. After turning off the engine, wait a few minutes for it to cool down. Open the hood and locate the dipstick handle—the orange one is easy to spot. Pull it out, wipe it clean, reinsert it fully, wait a moment, then pull it out again to check the oil level. It should be between the MIN and MAX marks. If it's low, just add some oil, but make sure to use the correct type—don't improvise. Don't forget to check the oil color each time; clean oil is ideal. Also, remember to park on level ground before checking.


