How to Check the Oil Dipstick on a Haval M6?
3 Answers
The method to check the oil dipstick on a Haval M6 is as follows: The oil dipstick of the Haval M6 is usually located next to the engine. Make sure the vehicle is cooled down. After pulling out the dipstick for the first time, wipe it clean with a clean tissue, then reinsert it. Upon pulling it out the second time, you can check the oil level on the dipstick. If the oil level is between the upper and lower limits, it indicates that the oil level is normal. To check the oil dipstick, first pull it out, then wipe off any residual oil with a cloth before reinserting it into the oil pan. This is because, during normal engine operation, oil splashed by the crankshaft may adhere to the dipstick, which can mix with the oil in the oil pan and affect the accuracy of the oil level reading.
I've been driving a Haval M6 for several years and regularly check the oil dipstick, doing it before every refueling or long trip. After parking the car and turning off the engine, I wait a few minutes to let the oil flow back to the oil pan for safety. Open the hood and locate the yellow-handled dipstick near the engine, gently pulling it out without using too much force. Wipe the oil off the tip with a tissue, then reinsert it fully and wait a few seconds before pulling it out again. At this point, check if the oil mark is between the minimum and maximum indicators—mid-level is ideal. If it's below the minimum line, add the same type of oil, but don't overfill it; too much oil can cause issues. I make it a habit to check monthly because engine oil is the lifeblood of the engine. Regular maintenance reduces wear, extends the car's lifespan, and saves on repair costs. If you run low on oil and discover it too late, leading to cylinder scoring and major repairs, it would be a huge loss.
As a beginner just getting familiar with the Haval M6, I was initially confused too, but I learned a simple inspection method. The key is to wait for the car to cool down for ten minutes after turning it off to avoid burns. Pull the hood release lever from the driver's seat to open it, then locate the small handle with the oil icon in the engine compartment—that's the dipstick. If the oil mark isn't clear after pulling it out, wipe it clean with a dry cloth, reinsert it until it clicks into place, wait a moment, then pull it out again to check the oil level directly. The oil line should be between the two marked lines. If it's below the lower limit, add a small amount of suitable oil to top it up. Make it a habit to check every time after washing the car to prevent issues from accumulating, maintain good car condition, and save trouble later on.