How to Check the Issuance Date of a Driver's License?

1 Answers
DeAllie
07/30/25 2:40am
Initial issuance date is indicated on the front of the driver's license. Driving a motor vehicle requires certain driving skills, and lacking such skills may lead to accidents. For those who have mastered safe driving techniques, the document that permits them to drive vehicles on roads is called a driver's license. This indicates that a driver's license serves as a certification of permission.
Was this review help?
16
5
Share
More Forum Discussions

Can You Remedy a Wrong Gear Shift During the Gear Change Exercise in Driving Test Stage Three?

If you shift into the wrong gear during the gear change exercise in Driving Test Stage Three, you can remedy it by quickly shifting into the correct gear. For example, if you intended to shift into 2nd gear but accidentally shifted into 3rd gear, immediately move the gear lever back to the neutral position and then quickly shift into 2nd gear. However, the time between shifting into the wrong gear and correcting it must be very short. The computer system uses various sensors to monitor signals, and if it detects issues like mismatched gears causing high RPM or jerking, it will immediately flag the candidate as failing the test. Additional Information: 1. Driving Test Stage Three Content: Driving Test Stage Three includes the road driving skills test and the safe and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment, specifically the road driving skills and safe and civilized driving knowledge test. The content varies depending on the type of vehicle license. 2. Driving Test Stage Two Content: Driving Test Stage Two, also known as the small road test, is part of the motor vehicle driver's license assessment, specifically the field driving skills test. For small vehicles (C1/C2), the test includes five mandatory items: reverse parking, parallel parking, hill start, right-angle turn, and S-curve driving (some regions may include a sixth item: highway toll card collection).
5
1
Share

Where is the production site of Changan Eado?

The production site of Changan Eado is located at Konggang Avenue, Yubei District, Chongqing. The Changan Eado is a compact 4-door, 5-seater sedan with the following dimensions: length 4730mm, width 1820mm, height 1505mm, and a wheelbase of 2700mm. It has a fuel tank capacity of 53 liters. The Changan Eado is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 116 kW at 5500 rpm and a maximum torque of 260 Nm between 1500 to 4000 rpm. The vehicle features front-wheel drive, with a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
8
4
Share

What does Honda CRV240 mean? What is the displacement?

1. The combined meaning of CRV240 turbo is: this CRV is equipped with a 1.5-liter turbocharged engine. Another example: Honda Civic, 180 turbo means: equipped with a turbocharged engine with a maximum torque approximate value of 180 N·m. 2. CRV is a classic urban SUV model produced by Dongfeng Honda Motor Company, and 240 refers to the maximum torque of this vehicle being 240 N·m. It should be noted that this value is an approximation, not an exact figure. Turbo refers to a turbocharged engine. The abbreviation T stands for turbo in English. 3. The seat design of the CR-V is very unique. The front seats can be laid flat after removing the headrests, forming a "bed" with the rear seats. Although it is a bit narrow, it is still quite comfortable. The rear seats can be split 6/4 or folded and pushed behind the front seats, leaving more space for the luggage compartment. A picnic table is placed under the luggage compartment, which is very practical for occasional picnics. 4. The CR-V's drive system is a dual-pump real-time four-wheel drive. Under normal conditions, it is front-wheel drive. When encountering adverse road conditions such as rain, snow, or sand that cause the front drive wheels to slip, the hydraulic system will promptly distribute torque to the rear wheels to achieve four-wheel drive until the road conditions return to normal.
18
1
Share

What is the Difference Between Water-Cooled and Air-Cooled BMW Engines?

Here are the specific differences between water-cooled and air-cooled BMW engines: 1. Operating Temperature: The optimal operating temperature for the cylinder walls of an air-cooled engine is 150~180°C, while the optimal operating temperature for the water jacket of a water-cooled engine is 85~95°C. 2. Cooling Medium: Air-cooled engines use air as the cooling medium, where high-speed flowing air directly carries away the heat from high-temperature components to reduce the engine temperature. Water-cooled engines use water (or antifreeze) as the cooling medium to absorb the heat from high-temperature engine parts, ensuring the engine operates within the normal temperature range. 3. Application: Air-cooled engines are commonly used in two-stroke engines, while water-cooled engines are typically found in four-stroke engines.
13
1
Share

Take Subject 4 Exam First or Submit Files First?

Each region may have different requirements. Some places require candidates to bring their files for the exam, while others do not. Please follow the local regulations. Additional information: 1. Introduction to Subject 4: Subject 4, also known as the theoretical test or driver's theory exam, is part of the motor vehicle driver's license assessment. After the implementation of the "Ministry of Public Security Order No. 139 of the People's Republic of China", the Subject 3 exam was divided into two parts: the road test and an additional safety and civilized driving knowledge test, commonly referred to as "Subject 4", which assesses "driving ethics". Since this test is conducted after Subject 3, it is commonly called the Subject 4 exam. 2. Subject 4 content: The test consists of 50 questions, presented in the form of case studies, images, animations, etc. The maximum score is 100, with a passing score of 90.
6
1
Share

What are the body dimensions of the Haval H9?

The body dimensions of the Haval H9 are: length 4856mm, width 1926mm, height 1900mm, with a wheelbase of 2800mm. It is a mid-to-large-sized 5-door, 5-seat SUV, featuring an 80-liter fuel tank capacity and tire specifications of 265/65R17. The Haval H9 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 165 kW at 5500 rpm and a maximum torque of 385 Nm between 1800 to 3600 rpm. Its drivetrain is front-engine, four-wheel drive, with a front suspension using double-wishbone independent suspension and a rear suspension employing a multi-link non-independent suspension.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.