···
Log in / Register

How to Check the Fuel Gauge on the Tharu?

4 Answers
KingRose
07/29/25 7:19am

The fuel consumption data of the Tharu can be viewed on the central trip computer screen in the instrument cluster. You can switch to the fuel consumption data by pressing the button on the right-hand stalk of the steering wheel. Below is an introduction to the Tharu: 1. The Tharu is a compact SUV under the Volkswagen brand, equipped with two engines: a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.4-liter turbocharged engine, coded as EA211-DJS, has a maximum power of 110 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5000 rpm and the maximum torque between 1750 to 3000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine, coded as EA888-DKV, delivers a maximum power of 137 kW and a maximum torque of 320 Nm, with the maximum power achieved between 4100 to 6000 rpm and the maximum torque between 1500 to 4000 rpm. This engine employs a combined injection system and uses an aluminum alloy cylinder head with a cast iron block. It is also paired with a 7-speed dual-clutch transmission. 4. The Tharu's front suspension uses a MacPherson strut setup, while the rear suspension features a multi-link independent suspension.

Was this review help?
7
0
Share
VanAndrew
08/13/25 12:15am

I've been driving the Volkswagen Tharu for almost two years now, and the fuel gauge is actually quite easy to read. The area in the middle of the dashboard with the fuel tank icon is where the fuel gauge is displayed. After starting the vehicle, you can see the circular needle pointing to 'F' for full tank, 'E' for empty, and the middle position indicates roughly half a tank left. During normal driving, a quick glance tells me the fuel status. When fuel is too low, the dashboard will light up a red warning light accompanied by a beeping sound to remind you to find a gas station promptly. Before long trips, I always check the fuel gauge and plan refueling stops based on the remaining mileage shown by the onboard computer. For city commuting, I confirm the fuel level every 150 kilometers to avoid getting stranded on the road. The Tharu's dashboard backlight is clear, making it easy to see at night. Developing a habit of checking the fuel gauge regularly can save a lot of hassle.

Was this review help?
19
3
Share
Expand All
KingstonDella
10/04/25 6:18am

The fuel gauge of the Tharu is read via a float sensor, with the dashboard displaying a scale range from E to F. When reading, observe the position of the needle rather than just looking at E or F; the fuel level indication is non-linear, with the upper half decreasing slowly and the lower half more quickly. Common issues such as fuel gauge fluctuations or inaccuracies on bumpy roads may be due to the sensor being stuck by debris. It is advisable to refuel at reputable gas stations to avoid debris accumulation. During each maintenance service, request the technician to check the sensor accuracy with diagnostic tools. If the fuel gauge flashes or stops moving while driving, safely park the vehicle immediately to check the fuse. For a more accurate estimate, combine the fuel consumption computer with the estimated remaining range. Refuel when the fuel level drops below 10% to avoid damaging the fuel pump.

Was this review help?
2
1
Share
Expand All
LeDaniela
11/17/25 7:53am

Accurately monitoring the fuel gauge ensures driving safety. When driving the Tharu, check the needle position of the fuel tank icon on the central dashboard: staying within the area before the E mark is generally safe, but once the yellow low-fuel warning light comes on, refuel immediately without delay—especially on highways where the risk of breakdown is high. Make it a habit to glance at the fuel gauge before every trip; the Tharu system emits a warning sound when fuel is low—don’t mute it with the audio. Dim lighting triggers automatic dashboard backlighting, ensuring visibility. Maintaining fuel above a quarter tank is safer to avoid sucking up sediment from the tank bottom, which could harm the engine. Long-term neglect of the fuel gauge may increase accident risks.

Was this review help?
13
3
Share
Expand All
More Forum Discussions

What documents and procedures are required for vehicle inspection in 2021?

Driving license, driver's license (one or more), compulsory insurance policy (copy). The following is a related introduction to vehicle annual inspection: Concept: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and driving license. It is equivalent to an annual physical examination of the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety," which helps to promptly eliminate potential safety hazards, urges the strengthening of vehicle maintenance, and reduces the occurrence of traffic accidents, commonly known as vehicle inspection. Legal provisions: Vehicle annual inspection, commonly referred to as vehicle inspection, is stipulated in the relevant provisions of the "Road Traffic Safety Law Implementation Regulations." Motor vehicles should undergo safety technical inspections according to the following periods from the date of registration: Passenger vehicles for operation must be inspected once a year within 5 years; after 5 years, they must be inspected every 6 months.
14
3
Share

Is 10W-40 Oil Fully Synthetic?

10W-40 oil is not fully synthetic; it is a Group II mineral oil. Generally, 10W-40 oil is a semi-synthetic oil, which is a blend of fully synthetic oil and mineral oil in a certain ratio. This type of oil has a relatively lower lubrication grade compared to fully synthetic oil, and its replacement cycle is correspondingly shorter. Typically, it should be replaced every 5,000 kilometers or every six months. 10W-40 oil is commonly used in tropical regions, areas with hot summers, or in older vehicles with higher mileage. The method for changing the oil is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the engine valve cover's oil filler port, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for any oil leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to ensure the engine oil level is within the standard range.
5
4
Share

What is the Principle of a Pure Steam Generator?

Pure steam generator principle is as follows: 1. Feed water is delivered to the decontamination column and the tube side of the heat exchanger by a feed pump, with the liquid level controlled by a level gauge. Industrial steam or heating water enters the heat exchanger, heating the feed water to the evaporation temperature and creating a strong thermal circulation inside the two columns. Pure steam is then generated in the evaporator (decontamination column). 2. The low velocity of the steam and the height of the column remove any potentially impure water droplets under gravity. By adjusting the opening of the industrial steam inlet valve through a pneumatic regulator, the pure steam pressure can be maintained at a constant value set by the user, ranging between 0-3bar.
6
2
Share

How many kilometers can 53 liters of fuel run?

53 liters of fuel can roughly run for 600 kilometers. Here is an extended introduction about gasoline: Origin: The first internal combustion engine suitable for transportation applications, the so-called Otto four-stroke engine, was invented in Germany in the last quarter of the 19th century. The fuel for these early engines was relatively volatile hydrocarbons obtained from coal gas. Development: Currently, many countries generally impose restrictions on the aromatic content in gasoline, especially benzene and olefins. These regulations have led to an increasing preference for high-octane pure paraffin (alkane) components, such as alkylation, and have forced refineries to add processing equipment to reduce benzene content. In the EU, the benzene content in all grades of motor gasoline is capped at 1%.
17
4
Share

Can a Car's Windshield Washer Reservoir Freeze and Burst?

Car windshield washer reservoirs will not freeze and burst. Here are the reasons: 1. Washer fluid disperses rainwater: It can quickly disperse rainwater on the windshield, preventing the windshield from becoming blurred during heavy rainfall. 2. Washer fluid generates electrical charge: It neutralizes the electrical charge generated by friction between the windshield, wipers, and airborne particles, enhancing the conductivity of the glass surface, resisting static electricity, and preventing charge-induced dirt accumulation that could obstruct vision. 3. The pH value of washer fluid remains neutral: It contains no metal ions and does not corrode car paint, rubber, or any metal components.
11
1
Share

Where is the water tank of a 4.2-meter truck located?

The water tank of a 4.2-meter truck is located behind the left front wheel. If you need to replace or add antifreeze, you need to lift the cabin. Here are some related introductions about the truck water tank: 1. The function of the truck water tank: The water tank is part of the cooling system. The engine of the truck relies on the continuous circulation of coolant to dissipate heat, and the water tank is where the coolant is stored. 2. The circulation path of the coolant in the engine: There are two circulation paths for the coolant in the engine, one is the large circulation, and the other is the small circulation. When the engine is just started, the coolant undergoes small circulation, at which time the coolant does not pass through the radiator, which helps the engine to heat up quickly.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.