How to Check the Engine Oil Level of the 2019 Mercedes-Benz E300L?

What are the reasons for a sudden failure to start a Bora car?

There are several reasons why a Bora car suddenly fails to start: 1. Symptom characteristics: The starter begins to turn but the rotation speed is insufficient, meaning it lacks power, and later the starter only makes a clicking sound without turning. Low temperatures in winter and forgetting to turn off certain electrical equipment can cause the vehicle to fail to start, especially when used for long periods of short-distance, low-speed driving in winter, which can result in the battery voltage dropping below the rated value, making it impossible to start or operate normally. Emergency solution: If this occurs, please call the service station for assistance, or find another car to jump-start, or temporarily start the engine, after which you must go to the service station to recharge the battery. 2. Symptom characteristics: There is no oil pressure in the engine fuel supply line. This situation often occurs on particularly cold mornings and is caused by long-term dirt accumulation in the fuel line. When the temperature is extremely low, water and debris mix, blocking the fuel line and preventing the engine from starting. Emergency solution: Place the car in a warm environment, and it will start after a while; or use a fuel line cleaning method to completely resolve the issue.

14

5

Share

Why can the car door still be opened when the central lock is engaged?

It is normal for the car door to still be opened when the central lock is engaged. The basic structure of the door lock is as follows: 1. Door lock switch: Most central door lock switches consist of a master switch and sub-switches. The master switch is installed on the door next to the driver and can lock or unlock all doors of the vehicle; sub-switches are installed on other doors and can individually control a single door. 2. Door lock actuator: The door lock actuator is controlled by the door lock controller and performs the tasks of locking and unlocking the door. There are mainly three types of structures: electromagnetic, DC motor, and permanent magnet motor. 3. Door lock controller: A control device that provides lock/unlock pulse current to the door lock actuator. It has the function of controlling the current direction of the actuator and, to reduce working time, includes a timing function. According to its control principle, it can be roughly divided into three types: transistor type, capacitor type, and speed sensing type.

10

4

Share

What is the power output of Tesla's Supercharger?

Tesla's Supercharger can reach a power output of 250KW. The details of Tesla charging pile power are as follows: 1. Home charging pile: The power is generally divided into 7kW and 20kW. 2. Voltage: Corresponding to 220V and 380V voltage respectively. Tesla charging methods: 1. Home charging: This involves installing a charging pile in your own garage. Installation of 380V or 220V first requires approval from the property management. 2. 4S store charging: 4S stores are equipped with Superchargers, and charging services fall under the after-sales scope. Charging for one hour can provide a range of 480km. 3. Portable charging: Modified to a standard power interface, allowing charging wherever there is a power source. However, portable chargers are generally only 110V, charging relatively slowly at a speed of about 20-30km/h. 4. Supercharger station charging: Mainly located in urban areas, generally in commercial districts. Charging from 0 to full takes no more than 2 hours.

1

3

Share

What Causes High Water Temperature in a Pickup Truck?

High water temperature in a pickup truck can be caused by the following reasons: 1. Radiator Leak: Open the radiator and check if the water level is below MIN. If the water level is very low, it is likely a leak. Add water, open the exhaust screw near the engine to release air, and check for the leak point. Air in the radiator can also cause the water temperature to rise. 2. Temperature Sensor: If the engine does not overheat but only shows high water temperature, it might be due to an inaccurate water temperature sensor. Replace the water temperature sensor. 3. Thermostat: If the thermostat fails to open, it prevents the circulation of hot and cold water. After the water temperature reaches 90 degrees, open the hood and touch the water pipes near the engine (be careful of burns). If the radiator is not hot, it means the water is not circulating. Both sides should be hot. Otherwise, replace the thermostat. 4. Water Pump: Over time, the fan blades of the water pump may be damaged, fallen off, or clogged, leading to poor water pump performance and preventing water circulation, which causes the water temperature to rise rapidly. In this case, the water pump needs to be replaced.

20

4

Share

What is the standard size of a large parking space?

Large parking spaces are 15.6 meters long and 3.25 meters wide, suitable for medium and large vehicles. Parking spaces are divided into two types based on size: Large parking spaces are 15.6 meters long and 3.25 meters wide, suitable for medium and large vehicles; Small parking spaces are 6 meters long and 2.5 meters wide, suitable for small vehicles. Parking spaces are divided into three types based on arrangement: Parallel parking spaces: The standard length is 6 meters, and the width is 2.5 meters. Angled parking spaces (30°, 45°, 60° angles): The diagonal length should reach 6 meters, the width is 2.8 meters, and the vertical distance between the two diagonal lines should maintain a standard of 2.5 meters. Perpendicular parking spaces: The length should be greater than or equal to 5 meters, typically set at 6 meters, and the width is 2.5 meters. Generally, 2.5x5.3 meters is considered the optimal standard parking space size.

8

3

Share

What to Do When the Song MAX Tire Pressure Monitoring Shows Signal Abnormality?

If the Song MAX tire pressure monitoring shows a signal abnormality, you can perform a tire pressure reset. A tire pressure reset is an operation to reset the tire pressure monitoring system after resolving a tire pressure fault. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, indicating the completion of the tire pressure reset. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan. Hazards of insufficient tire pressure: Increases the friction coefficient with the road surface, leading to higher fuel consumption; results in a heavy steering wheel and tendencies to deviate, posing risks to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling.

7

5

Share

How to Check the Engine Oil Level of the 2019 Mercedes-Benz E300L?

What are the reasons for a sudden failure to start a Bora car?

Why can the car door still be opened when the central lock is engaged?

What is the power output of Tesla's Supercharger?

What Causes High Water Temperature in a Pickup Truck?

What is the standard size of a large parking space?

What to Do When the Song MAX Tire Pressure Monitoring Shows Signal Abnormality?

Which has more space, the Borgward BX7 or the Captiva?

What are the basic knowledge of car operation?

What are the reasons for the automatic transmission failure in the Peugeot 307?

Why does the Nissan Sylphy make a squeaking noise when the air conditioning is turned on?