How to Check the Engine Oil Level of Lynk & Co 02?
3 Answers
Here is the method to check the engine oil level of Lynk & Co 02: 1. The engine oil level of Lynk & Co 02 is displayed on the dashboard. Press and hold the start button for ten seconds without stepping on the brake, and the oil condition will be shown on the dashboard. 2. When checking, make sure the car's four wheels are parked on the same level surface without any tilt. If the car body is tilted, the oil level in the oil pan will change, resulting in inaccurate measurements. Additional Information: Here is an introduction to the Lynk & Co 02: 1. Exterior Design. The urban skyline front grille, with integrated headlights and grille design, makes the front end appear wider. The split-type headlights are the most distinctive feature of Lynk & Co models, integrating the turn signal function. 2. Body Dimensions. The Lynk & Co 02 measures 4448mm in length, 1890mm in width, and 1528mm in height, with a wheelbase of 2702mm. It has a ground clearance of 201mm, ensuring SUV-level passability.
I've been driving a Lynk & Co 02, and checking the oil level is actually quite simple. After parking and turning off the engine, wait about 10 minutes for the oil to settle back to get an accurate reading. Then, open the hood, locate the dipstick—it usually has an orange or yellow handle. Pull it out, wipe off any residue from the top, reinsert it all the way, wait a few seconds, then pull it out again to check. The oil mark should be between the Min and Max lines. If it's too low, top it up with the same type of oil promptly. I make it a habit to check once a month to avoid engine damage from low oil levels. Remember to do this on level ground with a cold engine—hot oil can cause burns. Regular checks also help spot leaks early, saving you from costly repairs.
I just learned to drive not long ago, and checking the oil level was something I figured out on my own. After parking and turning off the Lynk & Co 02, wait a few minutes for the vehicle to settle down—don't rush to do it all at once. Under the hood, there's an oil dipstick. Pull it out, wipe off the old oil mark, reinsert it, and then pull it out again to observe if the oil mark is between the minimum and maximum indicators. At first, I was all thumbs, but now I've gotten much more skilled. If the oil level is low, go to the gas station to buy the right oil and add a little, but be careful not to overfill and cause leaks. Make it a habit to check every few thousand kilometers—it can extend the engine's lifespan. This method is simple and easy for beginners to pick up; just do it a few times, and it'll become routine.
