How to Check the Engine Oil Level of Lynk & Co 01?

1 Answers
DiFrancisco
07/29/25 12:09pm
The method to check the engine oil level of Lynk & Co 01 is as follows: The oil dipstick of Lynk & Co 01 is located on the dashboard. Without pressing the brake pedal, hold the start button alone for ten seconds, and the oil condition will be displayed on the dashboard. When checking, make sure that all four wheels of the car are parked at the same level height, and the body should not be tilted. Once the body is tilted, the oil level in the oil pan will change, resulting in inaccurate measurement. The Lynk & Co 01 has a body length, width, and height of 4512mm, 1857mm, and 1689mm respectively, with a wheelbase of 2734mm. It is equipped with a Drive-E series 2.0TD turbocharged engine, offering leading fuel economy and power performance in its class.
Was this review help?
16
3
Share
More Forum Discussions

Does a New Car Need Audio System Modification?

If you have high demands for audio quality or the original car audio system is really poor, then modification is justifiable. Otherwise, there is no necessity to modify the audio system for a new car. Modifying the audio system may damage the original wiring harness, leading to issues such as electrical leakage or blown fuses, which might outweigh the benefits. Notes on audio system modification: 1. Audio Source: Currently, cars provide Bluetooth, WIFI, and AUX interfaces as connection methods for audio sources like phones or players. Among these, the AUX interface offers the highest quality or even lossless connection, so it is recommended to use the AUX interface when playing music. 2. Speakers: The role of speakers is self-explanatory. A car's speakers include tweeters and woofers, and the quality and effect of the sound depend on the number and level of the speakers. Lower-end cars may have only two speakers, while high-end cars may feature over a dozen speakers for surround sound. There are various brands of speakers, with higher-end ones including Burmester and Harman. 3. Amplifier: A song contains both high and low notes, with different frequencies for different tones. The amplifier's role is to restore these tonal frequencies, and the more powerful the amplifier, the wider the range of frequencies it can restore. Therefore, the quality of music playback is partly determined by the amplifier. Ultimately, the amplifier serves the speakers, so the choice of amplifier should match the speakers.
20
1
Share

What is the original tire brand of the BMW 5 Series?

The original tires for the BMW 5 Series are Pirelli tires. Below is a detailed introduction to the BMW 5 Series: 1. Vehicle Positioning: The BMW 5 Series is a mid-to-large-sized luxury sedan under the BMW brand. It is a C-class sedan, and its main competitors include the Mercedes-Benz E-Class, Audi A6L, and Cadillac CT6. The BMW 5 Series is available in both standard wheelbase and long wheelbase versions. The long wheelbase version is domestically produced, while the standard wheelbase version is imported. 2. Powertrain: The domestically produced BMW 5 Series is equipped with two engines: a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine delivers a maximum power of 135 kW and a maximum torque of 290 Nm, paired with an 8-speed automatic transmission (8AT). The high-power 2.0-liter turbocharged engine produces 252 horsepower and a maximum torque of 350 Nm, also paired with an 8AT. The 8-speed automatic transmission used in the BMW 5 Series is a product from ZF. 3. Suspension Type: The BMW 5 Series features a double-wishbone independent front suspension and a multi-link independent rear suspension.
20
1
Share

How Often Should the Coolant in a Passat Be Replaced?

Passat's coolant should be replaced every 40,000 kilometers or two years. The method for replacing the coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose gets its name from having five connections to different parts of the car. The coolant flows through the five-way hose and is then distributed to various parts of the vehicle to perform its function. If there is any leakage of coolant in this section, the hose should be replaced or the connections re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue to fill it until water flows continuously through the engine cooling system. Then, idle the engine for 3 to 5 minutes to circulate the water. The water initially draining from the reservoir may have a faint pink tint. Continue adding clean water until the water coming out is clear. Remember to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose. This allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels some air, the coolant level will drop. Add more coolant until it reaches the "MAXT" mark on the reservoir.
14
1
Share

What is the difference between the Haval H2 Red Label and Blue Label?

The differences between the Haval H2 Red Label and Blue Label are as follows: 1. Red Label: The dual-label design of the Haval H2 targets different consumer groups, similar to the difference between the Toyota Corolla and Levin. The Red Label follows a mainstream style, akin to the Toyota Corolla, appealing generally to mature and steady individuals from the 70s and 80s generations. In terms of visual impact, the Red Label is noticeably less striking than the Blue Label. 2. Blue Label: The Blue Label adopts a sporty style, resembling the Toyota Levin, and attracts a younger demographic. The exterior differences between the Blue Label and Red Label H2 models are distinct, yet both retain the family characteristics of Haval SUVs. The angular hexagonal grille gives the Blue Label H2 a more aggressive front-end expression.
7
1
Share

What are the reasons why the Roewe one-button start cannot start the car?

Roewe one-button start cannot start the car, possible reasons include insufficient battery or fuel, locked steering wheel, etc. The specific reasons for failure to start are as follows: Insufficient car battery power or fuel: To determine if the battery power is insufficient, turn the ignition key to the ON position (for one-button start models, press the start button twice without stepping on the brake), turn on the headlights. If the light noticeably dims or does not light up at all, and then press the horn. If the horn sound is significantly weaker than usual or does not sound, it can be judged that the battery power is insufficient. If the fuel gauge shows below the red line, the car also cannot start. Locked steering wheel preventing start: Many cars have a common anti-theft function. After removing the key, if the steering wheel is not straightened or has been turned, the steering wheel self-locking function will activate, causing the steering lock pin and steering column to engage, making the steering wheel immovable and preventing the car from starting. Circuit or electronic failure: Circuit failures include blown fuses, open high-voltage coils, open low-voltage circuits, detached central ignition wires, leaking distributor heads, and damaged spark plugs. Electronic failures mainly refer to the central computer control board losing functionality. Fuel system failure: Possible fuel system failure locations include malfunctioning fuel pumps, blocked fuel lines, clogged fuel filters, carbon buildup on spark plugs, damaged injectors, etc.
4
1
Share

How Long Is It Appropriate to Run the Air Conditioner While Parked?

It is advisable to limit it to around 15 minutes. Running it for too long can lead to poor heat dissipation and damage the car engine. Below are precautions for using the car air conditioner: 1. Do not sleep with the air conditioner on: In relatively confined environments, such as inside a garage, it may lead to carbon dioxide poisoning. It's best to run the air conditioner in open-air or well-ventilated areas and leave a slight window gap. Shortly after entering the car, one should open the windows or activate the external circulation ventilation system to introduce fresh air. Avoid driving for extended periods with closed windows and doors, and never sleep or rest for long durations in a sealed car. 2. Maintain air exchange between inside and outside: After purchasing a new car, it's important to facilitate air exchange between the interior and exterior as much as possible, similar to airing out a newly renovated home, to allow harmful gases inside the car to volatilize and dissipate as quickly as possible.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.