How to Check the Engine Oil Level in a Lynk & Co 01?
4 Answers
The method to check the engine oil level in a Lynk & Co 01 is: 1. The oil dipstick of the Lynk & Co 01 is located on the dashboard. Without pressing the brake pedal, hold down the start button for ten seconds, and the oil condition will be displayed on the dashboard; 2. When checking, ensure that all four wheels of the car are parked at the same horizontal level, and the body should not be tilted. If the body is tilted, the oil level in the oil pan will change, resulting in inaccurate measurements. Taking the 2020 Lynk & Co 01 as an example, it belongs to the compact SUV category, with body dimensions of: length 4512mm, width 1857mm, height 1689mm, a wheelbase of 2734mm, and a curb weight of 1736kg.
Last time I drove the Lynk & Co 01, I checked the engine oil—it was quite simple. Park on level ground, turn off the engine, and wait five to ten minutes to let the oil flow back into the oil pan. Open the hood by pulling the handle located below the driver’s side. Look for the dipstick—a long handle with a yellow or orange label near the engine. Pull it out, wipe it clean with a cloth, reinsert it all the way, then pull it out again to check the oil level, which should be between the MIN and MAX marks. If it’s below MIN, slowly add the recommended OEM oil. Don’t forget the frequency—I check monthly or before long trips. Regular maintenance prevents engine wear, protects performance, and takes just minutes but saves big money.
Checking the Lynk & Co 01 oil level is straightforward, but safety first. Park on level ground, turn off the engine, and wait 30 minutes for accurate readings. Open the hood, locate the dipstick (usually with a pull handle), wipe it clean, reinsert, then check the oil mark. Ideal level should be between indicators. If low, slowly add manufacturer-recommended oil—avoid overfilling or mixing brands. While OBD tools can help monitor electronically, physical checks remain most reliable. Biweekly inspections help detect leaks/consumption early, protecting your engine from costly repairs. This simple habit ensures driving peace of mind.
Checking the oil in the Lynk & Co 01 is straightforward. Park on level ground with the engine off and let it cool for a few minutes. Open the hood, locate the dipstick, wipe it clean, reinsert it, then pull it out to check that the oil level is between the MIN and MAX marks. If it's low, add the appropriate amount of oil. Remember to use the correct oil type and keep the operation clean and efficient.
