···
Log in / Register

How to Check the Engine Oil Level?

4 Answers
LeStella
07/29/25 6:45pm

Engine oil level can be checked by: After the engine is turned off for about half an hour, pull out the oil dipstick and wipe it clean, then reinsert the dipstick and pull it out again to see the oil level. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. The main functions of engine oil are to reduce friction and wear of moving parts, and to remove sludge (one of the functions of dispersants) and varnish (detergents) from the engine. It also neutralizes acids produced from fuel and lubricant oxidation (detergents), improves the sealing of piston rings, and cools the engine by carrying away heat from moving parts.

Was this review help?
5
0
Share
ArcherRose
08/14/25 12:12pm

I've been driving for almost ten years, and checking the engine oil is routine for me. Doing it myself is worry-free and prevents potential issues. First, park the car on level ground—never on a slope—and wait a few minutes after turning off the engine to let the oil settle properly. Pull out that small dipstick, usually located near the top of the engine, wipe off the old oil residue with a clean cloth, fully reinsert it, and then slowly pull it out again, being careful not to get it dirty. Make sure the oil level is between the MIN and MAX marks—too low and it can wear out engine parts, too high and it affects cooling. I make it a habit to check every two weeks, also keeping an eye on whether the oil has turned black, which means it's time for a change. If it's low, top it up with the same type of new oil, filling to just above the middle mark—never overfill. Maintaining the right oil level can extend your engine's lifespan by tens of thousands of kilometers, saving money and being eco-friendly.

Was this review help?
8
0
Share
Expand All
Georgia
10/14/25 7:54am

I just learned to drive not long ago and think checking the oil isn't too hard to grasp. Park on level ground, turn off the engine and wait a bit for the oil to settle. Take out that little dipstick in the engine bay, wipe it clean of oil marks, reinsert it, then pull it out again. The oil mark should be between the MIN and MAX indicators - too much or too little is no good. If it's low, top it up with the same oil grade, don't mix brands randomly. New drivers should remember to check regularly, like once a month, to protect the car from breaking down roadside. Keep it simple - just use paper towels and the spare oil bottle from the garage.

Was this review help?
3
2
Share
Expand All
RyderLynn
11/28/25 2:02am

Checking the engine oil level primarily ensures the correct operating conditions. Park on level ground with the engine off for more than five minutes. Pull out the dipstick, wipe it clean, reinsert it, then pull it out again to check if the oil level is within the marked range. Perform regular preventive maintenance; if low, add the correct type of engine oil.

Was this review help?
3
1
Share
Expand All
More Forum Discussions

How Long Does It Take to Paint a Car Body?

Car body painting generally takes about 2 days to complete. If the painting area is large, it may take three to four days to finish the entire painting job. Painting sequence: The painting sequence for cars starts from the top of the car to the doors, and then proceeds around the car body. This spraying sequence helps avoid surface overlaps and interface marks. The spraying speed should be uniform, without any skipping or missing spots. If uneven coloring occurs during the painting process, you can reduce the paint viscosity and then continue spraying the uneven areas. Post-painting maintenance: When washing the car, avoid doing so under strong sunlight, as dried cleaning agents can easily leave marks on the new paint. Use dedicated neutral running water for washing, and avoid using highly alkaline soap water to prevent washing away the oils in the new paint. When going to a car wash, make sure the staff doesn't use wax-stripping detergents, as they may damage the paint surface.
1
1
Share

What is the ES6 car?

ES6 is a mid-size pure electric SUV under the NIO brand. Exterior design of the ES6: The front face of the ES6 does not feature large-area chrome plating, with two light units installed on each side; the air intake grille is also relatively small. The overall shape of the ES6 is very similar to that of the ES8, with both models boasting a fashionable appearance and a certain sporty feel. Performance of the ES6: The ES6 adopts a high-strength aluminum and carbon fiber composite structure, achieving a 0-100 km/h acceleration time of 4.7 seconds, an ultra-long comprehensive range of 510 km, and a braking distance of 33.9 meters. Battery specifications of the ES6: The standard configuration of the NIO ES6 includes a 70 kWh ternary lithium battery pack. Additionally, the ES6 offers an optional upgrade package with an 84 kWh nickel-cobalt-manganese NCM811 battery cell, significantly enhancing the driving range.
16
3
Share

Can Fuel Savers Really Save Gas?

Fuel savers actually cannot save gas. A fuel saver can only operate within the vehicle's displacement limits. For example, installing one on a 2.4L displacement vehicle won't make it consume fuel like a 1.0L car. The fuel injection volume is preset during manufacturing and determined by the engine load. Below is an introduction to different types of fuel savers: 1. Solid-State Fuel Catalysis & Air Oxygenation Type: This product uses solid-state physical fuel and air catalysis. During operation, it automatically cleans carbon deposits in the fuel lines and injectors, optimizing injector atomization to ensure complete fuel combustion and improve thermal efficiency. 2. Oxygen-Enriched Type: It utilizes the vehicle's DC power to ionize air under high voltage, producing O3 (ozone), which is then delivered to the engine to increase oxygen supply. 3. Electronic Type: Some connect between the battery terminals, while others plug into the cigarette lighter. They contain capacitors to stabilize electrical current.
3
3
Share

Why is the Volkswagen one-key start not sensitive?

If the one-key start is not sensitive, try pressing the start button again. Sometimes it's just not pressed firmly enough, which will power on the car but not start the engine. Additional information: 1. One-key start: Simply press the one-key start button to start or turn off the engine. Most ignition processes require stepping on the foot brake. The one-key start feature is part of smart car technology, and now many domestic cars are equipped with it. 2. Three key points for installing a one-key start system: the wiring of the plug under the ignition switch, the position of the button, and the handling of the steering lock. 3. Precautions: When installing the plug wiring, note that besides the OFF position, the ignition switch commonly has 3 positions: ACC, ON, and START. During installation, first identify which wire or wires are connected under each position, mark them accordingly, and then connect them to the corresponding ACC, ON, and START output transfer plugs of the keyless start system.
18
2
Share

What are the rules and deduction requirements for Subject 3 driving test?

Subject 3 scoring details: 1. Vehicle preparation shall be judged according to the following rules: ① Failure to walk around the vehicle to inspect its appearance and surrounding environment results in disqualification. ② Failure to observe rear traffic conditions before opening the door results in disqualification. 2. Starting shall be judged according to the following rules: ① Starting with insufficient brake air pressure results in disqualification. ② Starting with doors not fully closed results in disqualification. ③ Failure to observe interior/exterior rearview mirrors or check rear traffic by turning head before starting results in disqualification. ④ Starting engine without gearshift lever in neutral (parking gear) results in disqualification. ⑤ Starting without releasing parking brake and failing to correct promptly results in disqualification. ⑥ Starting without releasing parking brake but correcting promptly deducts 10 points. ⑦ Not releasing starter switch promptly after engine starts deducts 10 points. ⑧ Failure to use horn appropriately when starting in complex traffic conditions deducts 5 points. ⑨ Vehicle jerking during start deducts 5 points. ⑩ Improper accelerator pedal control causing excessive engine RPM during start deducts 5 points.
9
3
Share

What is the power of the Lingzhi M5EV motor?

The maximum power of the Lingzhi M5EV motor is 90kW. More information about the Lingzhi M5EV is as follows: 1. The front face of the Lingzhi M5EV adopts the family's wing-style front grille design, which has strong recognition. It is paired with eyebrow-shaped projection headlights and high-penetration front fog lamps, widening the visual effect of the front face. The brand logo and the edges of the fog lamps are decorated with blue, symbolizing the different identity of its new energy model. 2. The Lingzhi M5EV is equipped with a permanent magnet synchronous motor with a maximum power of 90kW and a maximum torque of 300N·m, as well as a ternary lithium battery with a capacity of 70kW·h, providing a super-long range of 350km, fully meeting the daily business needs of wealth creators.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.