How to check the engine oil in an Audi A4L?
4 Answers
The method to check the engine oil in an Audi A4L is: press the 'car' button and select the oil level to view. The Audi A4L is a mid-size 4-door 5-seater sedan with body dimensions of: length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm. The Audi A4L is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 110 kW, a maximum power speed range of 4200 to 6000 rpm, a maximum torque of 270 Nm, and a maximum torque speed range of 1450 to 4200 rpm. Its drive system is front-wheel drive, and both the front and rear suspensions use five-link independent suspensions.
I’ve been driving my Audi A4L for almost three years, so checking the engine oil is something I’m very familiar with. First, park the car on level ground, turn off the engine, and wait ten minutes for the oil to drain back. Then, simply press the CAR button on the center console to enter the vehicle settings, select the oil level display under Maintenance and Inspection, and the system will start measuring automatically. It’s important to measure after the engine is warm for accurate results—if you check right after a cold start, the oil hasn’t fully drained back, and the reading will be falsely low. The whole process takes about a minute, and the instrument cluster will display a green scale bar. My model has an electronic oil dipstick instead of a physical one; older models had a yellow pull-ring dipstick for manual checks, but newer ones are mostly digital, making it super convenient with automatic reminders for oil change intervals.
I remember the technician specifically taught me how to check the engine oil during my last service, and the steps are actually quite simple. You must let the engine warm up, turn it off, and wait a few minutes before proceeding. Then, press the menu button on the left side of the steering wheel, scroll to the engine oil level option, and press the confirm button to initiate the check. Electronic measurement is much more convenient than the traditional dipstick, as the dashboard directly displays a bar graph from Max to Min for the oil level. If you find the oil level is low, don't rush to top it up—first check for oil leaks or burning. My car now has 80,000 kilometers, and I make it a habit to check the oil level monthly. Developing this habit helps detect engine issues early.
Last week, I just taught my friend who bought a new A4L how to check the engine oil. Starting the engine and waiting for the coolant temperature gauge to reach 90 degrees, then turning it off and waiting for five minutes is the key. Press the vehicle function button next to the MMI knob, select the service menu, and find the engine oil level measurement. The operation is more intuitive with the new large central control screen, while the older models may require using the steering wheel buttons. Seeing a full green bar indicates normal, but a yellow warning means you should be cautious. Once, I forgot to turn off the start-stop function, which caused the measurement to fail, and the system prompted me to restart the vehicle. Now, after every maintenance, I always check the oil level on the spot to confirm and prevent any oversight by the mechanic.
