How to Check the Engine Oil in a Lynk & Co 03?
4 Answers
The methods to check the engine oil in a Lynk & Co 03 are: 1. After turning off and cooling the engine, pull out the oil dipstick to check the oil level; 2. Press and hold the start button for ten seconds to view it on the dashboard. Taking the 2021 Lynk & Co 03 as an example, its body structure is a 4-door, 5-seater sedan, with body dimensions of length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm. The 2021 Lynk & Co 03 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW and a maximum torque of 245Nm, paired with a 6-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
I've been driving the Lynk & Co 03 for almost a year, and checking the engine oil is part of routine maintenance. First, park the car on level ground, turn off the engine, and wait 5-10 minutes for the oil to cool and flow back. Open the hood, locate the dipstick with the yellow handle, usually on the left side of the engine. Pull it out, wipe it clean with a cloth, reinsert it fully, then pull it out again to check if the oil level is between the min and max marks. If it's below the min line, add the appropriate 5W-30 or the recommended oil type. I check it monthly and also inspect the oil quality to ensure it's clear. If it appears cloudy or black, change the oil early to avoid engine damage. Always check before long trips to prevent engine overheating issues.
When I first got my Lynk & Co 03, I didn't know how to check the engine oil, but later learned the simple steps from the owner's manual. Park the car and turn off the engine, waiting for the temperature to drop to avoid misjudgment. Locate the dipstick, pull it out, wipe it clean, reinsert it, and then check the oil level to ensure it's in the middle range. If the oil is low, add the appropriate amount without overfilling, as it could lead to leaks. Now it's become a habit to check every two weeks or before refueling, and I also take the opportunity to inspect other fluid levels like the coolant. Beginners should be patient; good oil quality is essential for maintaining stable car performance, so don't skimp on this time.
Quick Operation: After parking and turning off the engine, let it cool for a few minutes. Open the hood, locate the dipstick, pull it out, wipe it clean, reinsert it, and check the oil level between the markings. If the oil is low, add the recommended oil—don't use just any oil. These three simple steps are all it takes. Checking every 500km gives extra peace of mind and helps prevent wear and tear.
