How to Check the Electronic Label After Successful Online Application for Inspection-Exempt Vehicles?

1 Answers
DeAdriel
07/29/25 10:46pm
You can check the motor vehicle inspection compliance label through the mobile app "Traffic Management 12123". Online vehicle inspection is very convenient as it avoids queuing at the vehicle management office for inspection, simplifies the process, and eliminates the need to affix the inspection compliance label. More details about vehicle inspection are as follows: 1. Advance Time for Vehicle Inspection: Motor vehicle inspection can be completed three months in advance. Whether it's vehicles exempt from on-site inspection or those requiring it, all can be inspected three months ahead. Completing the inspection in advance helps avoid the vehicle being overdue for inspection. Driving an overdue vehicle is illegal and violates the Road Traffic Safety Law of the People's Republic of China. 2. Vehicle Scrapping Time Due to Non-Inspection: If a motor vehicle fails to undergo inspection for three consecutive inspection cycles, it will be scrapped. Depending on the type of vehicle, the three inspection cycles correspond to one and a half years, three years, or six years, which will be noted on the vehicle's driving license.
Was this review help?
13
4
Share
More Forum Discussions

What is the sports car that looks like Wuling Hongguang?

The sports car that looks like Wuling Hongguang is the Corvette, which is a car produced by the American Chevrolet Motor Company. The dimensions of the Corvette are: length 4493 mm, width 1877 mm, height 1240 mm, wheelbase 2710 mm, and fuel tank capacity 36 liters. The Corvette is equipped with a 6.2L V8 engine, with a maximum horsepower of 480 hp and a maximum torque of 610 Nm, paired with a 6-speed automatic manual transmission. It features a MacPherson independent suspension at the front, a MacPherson independent suspension at the rear, and a front-engine, front-wheel-drive configuration.
17
0
Share

How to Use Lights When Entering a Ramp?

When entering a ramp, you should turn on the right turn signal in advance and ensure safety before driving into the ramp. Here are some additional details: 1. At night, when visibility is reduced, in addition to turning on the right turn signal in advance, you should also turn on the position lights and alternate between high and low beams. 2. When driving on the road, using lights correctly can improve safety during the journey. 3. When driving on urban roads, do not turn on the high beams as it will affect the vision of oncoming drivers and the drivers in front. 4. When driving on rural roads or highways without streetlights, turn on the high beams, but as a courtesy, turn them off when meeting another vehicle. 5. In a car's lighting system, the brake lights and turn signals are more prone to malfunction, so it is recommended to frequently check their working condition.
12
1
Share

How to remove the seats of Buick GL8?

Buick GL8's seat removal method is: 1. Pull the handle near the window of the rear seat; 2. Fold the backrest of the rear seat forward, and push the cushion part backward; 3. Lift it upward. The Buick GL8 is a 5-door, 7-seat MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, and a wheelbase of 3088mm. The Buick GL8 is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission, with a maximum power of 174 kW and a maximum torque of 350 Nm. Its drive mode is front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
3
3
Share

What Causes Transmission Noise When Driving on Bumpy Roads?

Transmission noise when driving on bumpy roads can be caused by: 1. Worn or damaged bearings, which produce abnormal sounds during normal operation; 2. Loose bolts on the transmission housing; 3. Loose grooves in the shift lever and shift fork of a manual transmission; 4. Failure to replace automatic transmission fluid for an extended period, leading to direct friction between components and abnormal noise. The functions of a transmission are: 1. To change the gear ratio, expanding the range of torque and speed variations at the drive wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable conditions; 2. To enable the vehicle to reverse while maintaining the engine's rotation direction; 3. To use neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitate gear shifting or power output.
2
3
Share

Where is the OBD interface of the X-Trail located?

The OBD interface of the X-Trail is located 5cm to the right of the fuse box under the steering wheel. The X-Trail is a compact 5-door 5-seater SUV with body dimensions of: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, and fuel tank capacity of 65 liters. The X-Trail is equipped with a 2.0L naturally aspirated engine and CVT continuously variable transmission, with a maximum power of 110 kilowatts and maximum power speed of 6000 revolutions per minute. Its drive system is front-engine front-wheel drive, with front suspension using MacPherson strut independent suspension and rear suspension using multi-link independent suspension.
5
2
Share

How to Turn Off the Radio in a Bora Car?

The method to turn off the radio in a Bora car is to turn the volume adjustment knob counterclockwise to the end. The Bora is a compact 4-door, 5-seat sedan with body dimensions of 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm and a fuel tank capacity of 50 liters. The Bora is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 85 kilowatts and a maximum torque of 200 Newton-meters. It features front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension employing a torsion beam non-independent suspension.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.