How to Check the Car's Odometer?

1 Answers
DiGavin
07/29/25 12:17pm
Method to check the car's odometer: The car odometer actually consists of two meters, one is the speedometer, and the other is the odometer. The speedometer indicates the car's speed in kilometers per hour. The number before 'km' represents the total distance traveled in kilometers. Traditional speedometers are mechanical, with a typical mechanical odometer connected to a flexible shaft. Inside the flexible shaft is a steel cable, and the other end of the flexible shaft is connected to a gear in the transmission. The rotation of the gear drives the steel cable to rotate, which in turn rotates a magnet inside the odometer housing. The housing is connected to the pointer and, through a hairspring, sets the pointer at zero. The speed of the magnet's rotation causes changes in the size of the magnetic field, disrupting the balance and thus moving the pointer.
Was this review help?
13
0
Share
More Forum Discussions

How thick is the top of the rear bumper?

The top of the rear bumper is generally less than two millimeters thick. Function of the rear bumper: The rear bumper is a crossbeam located below the taillights. In addition to maintaining its original protective function, the front and rear bumpers of a car also aim to achieve harmony and unity with the vehicle's body shape, as well as pursue lightweight construction. Nowadays, most car bumpers are made of polypropylene plastic. Manufacturing process: Generally, bumpers are made of modified PP material due to its advantages of balanced plasticity and rigidity, lightweight and thin properties, and low cost. Some bumpers made of other materials (such as fiberglass, carbon fiber, etc.) may be phased out due to poor environmental performance (non-recyclable) or high costs. Therefore, in the coming years, modified PP materials and increasingly mature thermoplastic elastomers (TPO) will dominate the production of car bumpers.
3
0
Share

Where is the engine of Changhe Q7 from?

BAIC Changhe Q7 is equipped with a 1.5-liter turbocharged engine across the entire lineup. Below is expanded information about BAIC Changhe: Engine of BAIC Changhe Q7: The 1.5-liter turbocharged engine in BAIC Changhe Q7 delivers 150 horsepower and a maximum torque of 200 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head. It is paired with either a 6-speed manual transmission or a CVT transmission. Configuration of BAIC Changhe Q7: BAIC Changhe Q7 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The CVT transmission paired with its engine is a structurally unique type of transmission. Inside the CVT transmission, there are two cone pulleys and a steel belt. The steel belt can move along the cone pulleys, allowing the transmission to vary speed and torque.
7
1
Share

What Does It Mean If the Radiator Frame of a Used Car Has Been Altered?

If the radiator frame of a used car has been altered, it indicates that the car has been involved in an accident. If only the radiator frame or some energy-absorbing collision components were damaged, and the overall condition of the vehicle is good without any damage to structural components like the frame rails, there should be no safety hazards or impact on driving performance. In such cases, the car is within an acceptable range, and purchasing a vehicle with a replaced radiator frame is reasonable. Below is some relevant information about radiator frames: 1. Material: There are three types of radiator frame materials available in the market: plastic, iron, or alloy. 2. Classification: Based on structure, they can be divided into integrated and segmented types. The integrated type is the most common form in the market, sometimes referred to as a "dragon gate frame." The segmented type is generally divided into three sections, connected via bolts or welding points.
1
3
Share

What is the brightness of halogen headlights?

Brightness The brightness of halogen lamps is 55W. Structure of halogen headlights: Halogen headlights are the most common type of car lights, and there's a reason they are so widely used—simple structure, low cost, and strong penetration. However, due to their low luminous efficiency, they are relatively dim and generate a lot of heat, earning them the nickname "candle lights." Advantages and disadvantages of xenon headlights: The advantages are high brightness, long lifespan, and low power consumption. The disadvantages include poor penetration and a certain warm-up time required to reach maximum brightness. Additionally, it's important to note that xenon lights are excessively bright and can easily affect the vision of oncoming drivers, so installing xenon lights must be accompanied by the installation of lenses!
17
5
Share

What are the dimensions of the BMW 3 Series 325?

The dimensions of the BMW 3 Series 325 are: length 4719mm, width 1827mm, height 1459mm, with a wheelbase of 2851mm, a fuel tank capacity of 59 liters, a curb weight of 1465kg, and front/rear tire specifications of 225/45R18. Below is additional information: Introduction to the BMW 3 Series: The BMW 3 Series 325 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 135kW and a maximum torque of 300Nm. It is paired with an 8-speed automatic transmission. The front suspension features a double-joint spring strut front axle, while the rear suspension is a multi-link independent suspension. About BMW: BMW is a German automotive brand, and its lineup includes models such as the 5 Series, 3 Series, X1, X7, and 7 Series.
7
0
Share

What are the advantages of rear-wheel drive handling over front-wheel drive handling?

Rear-wheel drive handling has the following advantages over front-wheel drive handling: Continuous engine output: In front-wheel drive vehicles, the engine directly transmits kinetic energy to the front two drive wheels through the drive shaft. In rear-wheel drive vehicles, the engine's kinetic energy is transmitted to the rear differential through a rearward drive shaft and then converted into driving force for the rear wheels, resulting in more continuous output and less likelihood of stalling. Greater maneuverability: Rear-wheel drive vehicles concentrate power on the rear wheels, allowing for smaller turning angles. This makes them more agile when making U-turns on narrow roads compared to front-wheel drive vehicles. However, at high speeds on highways, rear-wheel drive vehicles are more prone to losing control. Even minor steering adjustments can cause significant deviations in the vehicle's trajectory.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.