How to Check the Car's Dash Cam?

Can the vehicle body touch the line during curve driving?

During the Subject 2 curve driving test, the vehicle body must not touch the line. When the midpoint of the front of the car touches the right yellow line: Gradually turn the steering wheel to the left, starting with half a turn. Use the left corner of the front of the car to follow the yellow line. If the left corner is about to go beyond the yellow line, turn the wheel a bit more. If the left corner cannot reach the yellow line, turn the wheel back slightly. Continuously make minor adjustments. When the front of the car is in the middle of the curve: When the front of the car is in the exact middle of the curve transition, quickly straighten the steering wheel, usually by turning it back about one full turn. When the midpoint of the front of the car touches the left yellow line: When the midpoint of the front of the car touches the left yellow line, turn the steering wheel to the right by half a turn first, then make small adjustments as needed, following the curve.

16

1

Share

What type of engine oil should be used for a Honda Fit?

The Honda Fit can use 5W-30 engine oil. The type of engine oil required depends on the vehicle's engine specifications. For vehicles equipped with a naturally aspirated engine, mineral engine oil or semi-synthetic engine oil can be used. If the vehicle has a turbocharged engine, semi-synthetic or full-synthetic engine oil is recommended. The number "5" indicates the oil's low-temperature fluidity—the smaller the number, the lower the ambient temperature at which the oil can be used, providing better engine protection during cold starts. For example, "5" means the oil can withstand external temperatures as low as -30°C. The "W" stands for "Winter," indicating suitability for cold weather. The "30" represents the oil's kinematic viscosity standard at 100°C, with higher numbers indicating better high-temperature protection. Generally, mineral engine oil should be replaced every 5,000 kilometers, semi-synthetic oil every 7,500 kilometers, and full-synthetic oil approximately every 10,000 kilometers.

8

2

Share

How Long After Failing the Motorcycle Test Can You Retake It?

You can schedule a retest for the motorcycle exam ten working days after failing. Cancellation of Appointment: If the applicant is unable to attend the exam at the scheduled time, they must apply to cancel the appointment one day in advance. Failure to attend the exam at the scheduled time without cancellation will result in the exam being marked as failed. Number of Retests: Each subject can be tested once, and if failed, can be retaken once. If the applicant does not attend the retest or fails the retest, the current exam session is terminated. If the subject three safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid. Number of Appointments: Within the validity period of the driving skill test permit, the number of appointments for subject two and subject three road driving skill tests must not exceed five. If the fifth appointment still results in failure, the passed scores of other subjects will be invalidated.

3

1

Share

Can a C-class license drive a double-row mini truck?

C1 driver's license can drive a double-row mini truck. Permitted vehicle types for C-class license: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", the permitted driving scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Precautions for driving on highways with a C-class license: According to relevant regulations in the "Regulations on the Application and Use of Driver's Licenses", the first 12 months after a motor vehicle driver initially applies for a motor vehicle driver's license is the probationary period. During the probationary period, C1 drivers can drive on highways, provided that there is a "veteran driver" with more than three years of driving experience accompanying them in the front passenger seat. Otherwise, they will be fined.

15

0

Share

What should be paid attention to during sheet metal painting repair?

During sheet metal painting repair, the following matters should be noted: On-site inspection: Before automotive painting, the construction site must be inspected and prepared, keeping the ground clean and wall surfaces sanitary. If it's an outdoor construction site, the ground should be watered to prevent wind-blown sand and dust from affecting the gloss and weather resistance of the paint film during construction. Construction tools: Check the surface quality and cleanliness before painting. Before automotive painting, all tools used in construction, such as brushes, spray guns, paint mixing buckets, and stirring rods, must be kept highly clean and free from substances that could contaminate the paint, including oil stains, dust, water marks, and old paint residue. Color paint mixing: If color adjustment is needed, first test-mix a small sample. Only after matching the standard color panel should the mixing be expanded according to the tested ratio. Experience should be relied upon to understand the difference between wet and dry samples.

3

4

Share

Where is the Audi Q3 tailgate sensor switch located?

The Audi Q3 tailgate sensor switch is located on the inner side of the tailgate, where there are two buttons: one for simply closing the tailgate and the other for closing and locking the vehicle. The power tailgate feature means there is a button at the tailgate, allowing the owner to just press it lightly to automatically open or close the tailgate, making it convenient and effortless. The Audi Q3 is positioned as a compact SUV. In terms of body dimensions, the Elegance version measures 4481mm in length, 1848mm in width, and 1584mm in height; the Sport version measures 4495mm in length, 1848mm in width, and 1616mm in height. The LED daytime running lights on the Audi Q3's bumper have been removed, as Audi has integrated the LED daytime running lights with the headlights into a single unit. This design gives the front face of the Audi Q3 a cleaner and more streamlined appearance.

10

4

Share

How to Check the Car's Dash Cam?

Can the vehicle body touch the line during curve driving?

What type of engine oil should be used for a Honda Fit?

How Long After Failing the Motorcycle Test Can You Retake It?

Can a C-class license drive a double-row mini truck?

What should be paid attention to during sheet metal painting repair?

Where is the Audi Q3 tailgate sensor switch located?

What is the actual fuel consumption of the Kia Forte?

What does the snowflake and 4°C display mean in Volkswagen vehicles?

Is the BMW X3's on-demand four-wheel drive normally rear-wheel drive?

Which Button is for Car Defrosting?