How to Check the Annual Inspection Time of a Car?

1 Answers
AndrewRose
07/30/25 2:52am
Methods to check the annual inspection time of a car are: 1. Check the vehicle license; 2. Check the annual inspection sticker; 3. Check the compulsory insurance policy. The contents of the annual inspection include: appearance inspection, exhaust emission testing, chassis inspection, OBD inspection, lighting inspection, and brake inspection. Vehicle annual inspection can help promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Things to note during the annual inspection are: 1. Start the vehicle in advance in the inspection area for warming up; 2. Owners should clean the vehicle body before the annual inspection; 3. Restore the original state of the headlights before the annual inspection.
Was this review help?
8
4
Share
More Forum Discussions

What does maintreqd mean as a fault?

maintreqd indicates the maintenance warning light. maintreqd is the abbreviation for Maintenance Required, which serves as a reminder for the driver to perform vehicle maintenance and is not a fault. Solution: Disconnect the negative terminal of the battery for 20 seconds. (When disconnecting the battery, all electrical devices must be turned off; otherwise, it may cause the radio to lock.) Use an automotive computer diagnostic tool to reset the maintenance light. More details are as follows: 1. Vehicle maintenance refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as preventive work, also known as vehicle servicing. 2. Modern vehicle maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of vehicle maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
4
4
Share

What engine does the SWM G05 use?

SWM G05 uses a 2.0L naturally aspirated engine and a 1.5T turbocharged engine. The 2.0L engine has a maximum power of 105kW and a maximum torque of 190Nm; the 1.5T engine has a maximum power of 115kW and a maximum torque of 230Nm. The SWM G05 is the second SUV product born under SWM Motors' G platform. In terms of appearance, the new car draws design elements from the SWM G01. In terms of details, the designers used many sharp lines on its body, especially the large front grille, combined with the headlight assembly shaped by geometric broken lines, creating a very imposing visual effect. The body dimensions of the SWM G05 are 4750mm in length, 1860mm in width, and 1780mm in height, with a wheelbase of 2750mm.
14
4
Share

Where is the Mondeo's radiator located?

The Mondeo's radiator is positioned at the front of the engine compartment. The car radiator generally refers to the heat exchanger. As part of the vehicle's cooling system, the radiator in an engine water-cooling system consists of three main components: the inlet chamber, outlet chamber, main plate, and radiator core. Below are the radiator maintenance procedures: 1. Park the vehicle securely and turn off the engine. After the coolant temperature drops, open the expansion tank and add radiator cleaner; 2. Start the engine and let it idle for 5-10 minutes after the cooling fan activates; 3. Turn off the engine and remove the front bumper. During disassembly, ensure all fastening screws are loosened, then carefully detach from both ends toward the center to avoid breaking mounting clips; 4. After confirming the coolant has completely cooled, drain the radiator cleaner along with the coolant, then refill with fresh engine coolant.
3
5
Share

Where is the cabin air filter located in the Haima M5?

The cabin air filter in the Haima M5 is situated at the foremost part of the central console on the front passenger side, behind the servo motor. Below are additional relevant details: 1. Replacement method: To replace the cabin air filter, first locate the filter's slot. Unfasten the clip located at the front passenger side of the engine compartment, then remove the sound insulation cotton inside. The clip is very fragile, so exercise caution when opening it to avoid damage. After removing the filter, reach into the baffle to extract the cabin air filter. The filter has directional arrows on its outer side - ensure correct orientation during installation. 2. Function of cabin air filter: The cabin air filter plays a crucial role in the air conditioning system's cooling performance. It filters incoming air to improve cabin air quality by removing microscopic impurities, pollen, dust and other particulates, thereby providing occupants with a healthier breathing environment and protecting passengers' health.
1
0
Share

How to Perform Heel-Toe Shifting in a Manual Transmission?

Driving a manual transmission with heel-toe shifting method: Press the clutch pedal with your left foot, then press the brake pedal with the toes of your right foot, and press the accelerator pedal with your heel. The heel-toe technique essentially involves blipping the throttle while downshifting and simultaneously pressing the brake pedal. The so-called heel-toe action is used when approaching a corner—while braking, you use your right foot to blip the throttle, downshifting to the appropriate gear for exiting the corner. Here, the "heel" refers to the heel of the foot, and the "toe" refers to the toes. Many experienced drivers are familiar with the downshift blipping technique, which helps reduce jerking in the car. If severe jerking occurs after downshifting, it is due to the large speed difference between the engine flywheel and the clutch plate. To minimize jerking, you need to reduce the speed difference between the clutch plate and the engine flywheel.
15
2
Share

What causes the malfunction of the Lavida car key with a flashing red light?

Introduction to the reasons for the malfunction of the Lavida car key with a flashing red light: If the Lavida car key malfunctions and the red light flashes, it indicates that the car key has entered a protection state and needs to be rematched. The Volkswagen Lavida is positioned as a compact car and is a main model of SAIC Volkswagen, holding an important position in the domestic compact car market. The following is an introduction to related content: 1. The appearance and interior of the new Volkswagen Lavida are roughly similar to the 2018 model, with the front face continuing the family-style design. 2. The standard features of the new Volkswagen Lavida include: anti-lock braking, brake force distribution, brake assist, traction control, body stability control, driver airbag, passenger airbag, tire pressure monitoring, rear child seat interface, auto hold, hill start assist, rear parking radar, and electric adjustment of exterior rearview mirrors.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.