How to Check Subject 2 Exam Results?

Foggy on Rainy Days: Turn on Hot or Cold Air Conditioning?

On rainy days when fogging occurs, turn on the cold air conditioning. Here are the correct steps: 1. Turn on the cold air: Fogging on the windshield is caused by a significant temperature difference between the inside and outside of the vehicle. If the driving conditions are complex, using cold air can quickly remove the fog from the windshield. 2. Switch to warm air after the fog clears: Once the fog is removed, gradually adjust the temperature to the warm air setting in multiple steps to prevent the fog from reappearing. Note: Although hot air can also defog, using hot air to defog the windshield on rainy days can worsen the fogging.

20

4

Share

How Long Does a Plug Tire Repair Last?

It can last for 6 months to 1 year if not used on highways. Here are some relevant details about plug tire repairs: 1. Introduction 1: The "plug" method is a relatively primitive tire repair technique. Its principle involves first enlarging the puncture hole with a sharp tool like an awl, then inserting a rubber strip coated with adhesive into the hole. 2. Introduction 2: This method is simple to operate, extremely low-cost, and takes very little time. It doesn't require separating the tire from the rim or performing wheel balancing. 3. Introduction 3: The disadvantages are obvious - using an awl to enlarge the hole increases the damaged area, and this repair method isn't very durable, often leading to air leaks.

16

1

Share

What to Do If Your Vehicle Fails the Annual Environmental Inspection?

If your vehicle fails the inspection due to environmental reasons, it is because the pollutants in the exhaust emissions exceed the limit. Here are the detailed explanations: 1. Check if there is an issue with the car's catalytic converter: The catalytic converter processes pollutants through oxidation and reduction, converting them into harmless carbon dioxide, nitrogen, and water, thereby achieving purification. If the catalytic converter malfunctions, the pollutants in the exhaust will increase. You can try driving on the highway before the inspection to raise the catalytic converter to its optimal operating temperature. 2. Inspect the oxygen sensor and air filter: Problems with the oxygen sensor or air filter can cause the exhaust emissions to fail the test. These components should be repaired before the annual inspection. 3. Check the quality of the gasoline used: If the gasoline is of poor quality, you can try filling half a tank with E10 ethanol gasoline before the inspection.

6

1

Share

Should You Engage the Handbrake First or Shift to P Gear First When Parking?

When parking, it is acceptable to either engage the handbrake first or shift to P gear first. The P gear is the parking gear, which is used when the vehicle is parked and the engine is turned off. Every automatic transmission car is equipped with a P gear. There are three common types of automatic transmissions in automatic cars: AT transmission, CVT transmission, and dual-clutch transmission. Automatic transmission generally refers to the car's automatic gear-shifting mechanism. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load, replacing the driver's subjective judgment of timing and gear-shifting operations. Typically, an automatic car has six gear positions, arranged from top to bottom as: P, R, N, D, S, L.

9

2

Share

Which engine does the Lynk & Co 05 use?

As a new coupe SUV, the Lynk & Co 05 is equipped with a Drive-E series 2.0TD turbocharged high-power engine, which is also a four-cylinder engine. Here is some information about the Lynk & Co 05: 1. Power: It features a powertrain consisting of a Volvo-sourced 2.0T engine paired with an 8AT transmission. The 2.0T four-cylinder high-power engine delivers a maximum power output of 238 horsepower, mated to an 8AT transmission. 2. Transmission: The Lynk & Co 05 is equipped with an Aisin 8-speed automatic transmission, which adopts a longitudinal layout and weighs 96kg.

18

3

Share

What causes sudden clutch failure in the Baojun 730?

Solutions for sudden clutch failure in the Baojun 730 are as follows: 1. In such emergency situations, if conditions permit, it is best to have a rescue vehicle handle the situation. 2. If special circumstances make a rescue vehicle unavailable, first engage the third gear while the engine is off. Then, ensuring there is sufficient safety distance ahead, start the ignition and use the starter motor's power to forcibly start the vehicle. At this point, the car will experience a significant jerk—do not press the brake. Immediately coordinate with the accelerator to get the car moving, and adjust the gears based on the engine's RPM. That is, after starting, accelerate until you feel the engine RPM is high, then quickly shift to a higher gear.

2

4

Share

How to Check Subject 2 Exam Results?

Foggy on Rainy Days: Turn on Hot or Cold Air Conditioning?

How Long Does a Plug Tire Repair Last?

What to Do If Your Vehicle Fails the Annual Environmental Inspection?

Should You Engage the Handbrake First or Shift to P Gear First When Parking?

Which engine does the Lynk & Co 05 use?

What causes sudden clutch failure in the Baojun 730?

What Are the Advantages and Disadvantages of Ventilated Seats?

Insufficient Battery in Civic Smart Key?

Where is the cabin air filter of the old Bluebird?

What Can Tesla Valves Be Used For?