How to Check Subject 1 Test Results on 12123?

Do Toyota vehicles have a particulate filter?

Toyota's latest naturally aspirated and hybrid models do not have a particulate filter, while the older Highlander models do. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they enter the atmosphere. It can reduce soot emissions from diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. How a particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the particulate filter through a dedicated pipe. Inside, a densely arranged bag-type filter captures the carbon particles on a metal fiber felt filter. Once the accumulated particles reach a certain level, a burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if a Toyota vehicle has a particulate filter, you can use the following three methods: 1. Check the and to see if the particulate filter function is mentioned. Additionally, carefully review the fault codes in the manual to check for a "particulate filter" warning light indicator. 2. Look at the label on the oil cap. If the oil cap clearly states the use of 0W-20 grade oil, it indicates the presence of a particulate filter. 3. Inspect the exhaust pipe behind the catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter.

9

1

Share

What could be the possible causes of steering wheel vibration?

The cause of steering wheel vibration may be a fault in the steering system. Below is a detailed introduction to the automotive steering system: 1. Components: The automotive steering system mainly consists of the steering wheel assembly, steering column assembly, rack and pinion power steering gear and tie rod assembly, power steering (hydraulic or electric) system, and wheel assembly. 2. Function: During driving, the vehicle needs to frequently change its direction of travel according to the driver's will, which is referred to as vehicle steering. For wheeled vehicles, the method to achieve vehicle steering is that the driver uses a specialized mechanism to make the wheels (steering wheels) on the vehicle's steering axle (usually the front axle) deflect a certain angle relative to the vehicle's longitudinal axis.

16

2

Share

What should motor vehicles do when temporarily parked on the roadside?

Here is a detailed introduction to the precautions for motor vehicles when temporarily parked on the roadside: 1. Check the signs to determine whether temporary parking is allowed. First, observe whether there are parking restriction signs in the section. Temporary parking is only allowed if it is a time-limited parking area. 2. Check the rearview mirror for safety. Before parking, reduce the speed, then turn on the right turn signal and observe the right rearview mirror to see if there are any vehicles or pedestrians behind on the right side. 3. Engage the handbrake and turn on the hazard warning lights. Pull the handbrake or press the parking button. If you leave the vehicle briefly, it is best to turn off the engine, lock the doors and windows, and place a contact number in a visible place on the window.

7

2

Share

What to Do When the Automatic Transmission P Gear Cannot Be Engaged?

Automatic transmission P gear locking mechanism consists of a locking gear, a locking pin, and a set of motion mechanisms. After engaging the P gear, the cable drives the connecting ball pin, at which time the working pin slides to make the locking pawl tightly fasten the parking gear, and the vehicle's gear shift is locked, making it impossible to pull the gear lever. Below are the relevant introductions: 1. Solution for when the automatic gear lever cannot be pulled in P gear: If you need to shift to other gears, you must first start the vehicle and then engage other gears; or press the brake pedal and then switch gears. When parking, always ensure the vehicle is completely stopped before engaging the P gear, otherwise, it is easy to encounter this situation where the gear lever cannot be pulled in P gear. 2. Working principle of the automatic P gear: When the gear lever is placed in P gear, the parking lock mechanism locks the transmission output shaft. In P gear, the drive shaft is partially locked inside the transmission, so even without pressing the brake on flat ground, the vehicle has a certain braking force.

15

3

Share

How to Adjust Gas Idle Vibration?

Methods to adjust gas idle vibration: 1. If the idle jet and idle air jet are clogged, clean them with gasoline or acetone and blow them through with compressed air; 2. If there is air leakage at the intake manifold or the lower gasket of the carburetor, use tightening screws or add/subtract gaskets to fix it; 3. If idle instability is accompanied by a decrease in engine power, further check the spark plugs' condition, the sealing performance of the valves, and the correctness of the ignition timing. If necessary, perform maintenance and adjustments. The main causes of gas idle vibration include: uneven combustion of natural gas, clogged idle air jets, poor performance of the idle device, weak spark in individual spark plugs, poor sealing of individual valves, air leakage in the intake manifold, and ignition timing that is too early or too late.

11

1

Share

How to Define a Stock Vehicle?

Vehicles that have been in stock for more than 90 days are defined as stock vehicles, while those in stock for more than 180 days are classified as long-term stock vehicles. Methods to identify whether a vehicle is a stock vehicle include checking the vehicle's nameplate, manufacturing date, tire wear and production date, engine compartment, and inspecting the body for signs of aging or detachment of rubber components. Although stock vehicles can be purchased, it is not advisable to choose vehicles that have been in stock for an excessively long time. It is recommended to limit the vehicle's age to within one and a half years. For vehicles that have been in stock for more than one and a half years, the aging of various components has reached a significant level, and some wear-prone parts may even be out of warranty, making them not worth purchasing.

11

1

Share

How to Check Subject 1 Test Results on 12123?

Do Toyota vehicles have a particulate filter?

What could be the possible causes of steering wheel vibration?

What should motor vehicles do when temporarily parked on the roadside?

What to Do When the Automatic Transmission P Gear Cannot Be Engaged?

How to Adjust Gas Idle Vibration?

How to Define a Stock Vehicle?

What to Do When Your Foot Shakes Badly During the Subject 2 Driving Test?

What to Use to Clean the Inside of the Windshield Without Leaving Marks?

What is the difference between inverted and conventional shock absorbers?

Where Are the Accelerator and Brake Pedals Located in an Automatic Transmission Car?