How to Check Lights Without Ignition for Subject 3?
3 Answers
Check the dashboard to see if the lights are in the off state. After completing the pre-driving preparations and successfully passing the fingerprint verification, you will hear the voice prompt: 'Now start the simulated night light usage. Please follow the voice prompts to operate.' Upon hearing the voice prompt 'Please start,' press the clutch, shift into first gear, turn on the left turn signal (for more than 3 seconds), and simultaneously (turn your head to the left) observe the left rearview mirror.
As a friend who frequently assists with driving test preparation, I absolutely do not start the engine when checking the lights. After sitting in the driver's seat, turn the key to the ON position but do not start the engine. This will power the electrical circuits. First, turn on the headlight switch and switch between low beam and high beam to check if they illuminate. Then, activate the left and right turn signals, get out of the car, and walk around to observe if the front and rear lights are flashing. Don’t forget to press the brake pedal and have the examiner or a companion check if the brake lights are on. Press the hazard warning light button to confirm that all turn signals flash simultaneously. During the test, also check the license plate light and reverse light. If any light fails to illuminate, it might be due to a blown fuse or a bulb issue, which should be checked and replaced a few days before the test. The entire process is simple, but don’t be careless—properly functioning lights are the baseline for safe driving. Make it a habit to check them regularly in daily life, saving fuel and ensuring peace of mind.
Having worked at the dealership for a long time, dealing with similar issues is common. My suggestion for the Category 3 light inspection is not to get flustered: the circuit is live as soon as the key is turned to the ON position. Test the brightness of the low and high beams by turning on the headlights. Check if the turn signals are flashing normally. Have someone observe the brightness of the brake lights when you press the brake pedal. Test the hazard light button to ensure all lights flash. If a light doesn't work and causes a test failure, first check if the corresponding fuse in the fuse box is blown or if there's poor contact in the bulb socket. Simulate the inspection a few times during regular practice to familiarize yourself with the vehicle's switch positions, and perform the actions gently without panic. Remember, the lights aren't just for the test; driving at night with faulty lights is extremely dangerous, so regular maintenance is essential to prevent accidents.
