How to Check if You Passed the Subject 2 Test?

How much engine oil does a BMW 5 Series 2.0T engine require?

BMW 5 Series' 2.0T engine requires 5 liters of engine oil. Here is an introduction about the BMW 5 Series: 1. The BMW 5 Series is a mid-to-large luxury sedan under the BMW brand. This model has been domestically produced in China, with the domestic version being long-wheelbase models. 2. The BMW 5 Series uses two types of engines: one is a low-power 2.0-liter turbocharged engine, and the other is a high-power 2.0-liter turbocharged engine. 3. The low-power 2.0-liter turbocharged engine has the model code b48b20c, with a maximum power of 135 kW and a maximum torque of 290 Nm. The engine's maximum power is achieved at 5000 to 6500 rpm, and the maximum torque is available between 1350 to 4250 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT). 4. The high-power 2.0-liter turbocharged engine has the model code b48b20d, with a maximum power of 185 kW and a maximum torque of 350 Nm. The engine's maximum power is achieved at 5200 to 6500 rpm, and the maximum torque is available between 1450 to 4800 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT). 5. The BMW 5 Series uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.

16

1

Share

Is It Illegal to Remove Rear Seats from a Five-Seat Sedan?

Removing rear seats constitutes illegal modification, which is a serious traffic violation. Below is relevant information about vehicle modifications: 1. Concept: Modification refers to altering the external appearance, interior design, or mechanical performance of a factory-produced vehicle according to the owner's needs, primarily including body modifications and powertrain modifications. 2. Regulations: Vehicle decoration affects safety performance, while modifications may have an even greater impact on safety. Before modifying a licensed vehicle, owners must register and declare the modifications to the vehicle management office. The modification technical report must be reviewed and approved by the office before proceeding. After completing the modifications, owners must also complete modification change procedures at the vehicle management office.

2

5

Share

How many kilometers should antifreeze be replaced?

It is recommended to replace the coolant every 40,000 to 50,000 kilometers. Regular replacement of coolant is essential. Here is more information about coolant: 1. The full name of coolant is antifreeze coolant, but its main function is cooling rather than antifreezing. 2. Water-cooled engines rely on the continuous circulation of coolant within the engine for heat dissipation. When the engine is running, the water pump also operates, allowing the coolant to circulate within the engine and carry away excess heat. 3. There are two circulation paths for coolant within the engine: one is the major cycle, and the other is the minor cycle. When the engine has just started and the temperature is relatively low, the coolant will undergo the minor cycle, during which it does not pass through the radiator for heat dissipation. This helps the engine warm up quickly.

9

0

Share

What are the differences between Michelin Primacy and Energy?

Switch the square button below the dashboard brightness adjustment on the left side of the dashboard to the ecoon interface, then press and hold to turn off the eco mode. Here is more information about eco: 1. The eco mode is the economy mode indicator for automatic transmission vehicles, which refers to the comprehensive judgment and analysis of conditions that affect fuel consumption during driving, such as automatic transmission shifting, engine speed, vehicle speed, braking, and transmission oil temperature. 2. The ECU control unit calculates the amount of fuel to be provided to the engine, resulting in lower fuel consumption compared to normal driving mode. Simply put, it controls the engine speed with appropriate gear shifts to reduce unnecessary fuel consumption. 3. The eco mode mainly acts on the throttle. Whether the car's speed is too low or too high, as long as it exceeds the normal range, the eco system will function, reminding the driver to pay attention to the way they press the throttle to achieve fuel savings. For active eco modes, there is usually a dedicated control button that the driver can turn on when needed.

20

2

Share

Does a New Plug-in Hybrid Vehicle Need to Be Charged?

Under normal circumstances, the engine of a plug-in hybrid vehicle cannot directly charge the power battery, but it can charge the battery through certain energy recovery devices. Therefore, when the power battery is low on charge, it must be charged externally. Hence, plug-in hybrids do require charging. Below is more information about plug-in hybrid vehicles: 1. A plug-in hybrid vehicle is a new type of hybrid new energy vehicle, different from traditional gasoline-powered hybrids combined with pure electric drive. The driving principle and unit of plug-in hybrids are similar to those of electric vehicles, with the only difference being that they are equipped with an engine. 2. Plug-in hybrid vehicles fall between conventional hybrid vehicles and pure electric vehicles. For long trips, they primarily use the internal combustion engine mode, while for short trips, they use the pure electric mode. 3. Plug-in hybrid vehicles have two sets of power drive systems: one is the traditional internal combustion engine drive, which consumes fuel to obtain driving force, and the other is the electric drive, which consumes the power battery's charge to obtain power. When necessary, both systems can work together to drive the vehicle.

11

0

Share

Which tire does not rotate when the car turns right?

When a car turns right, all four wheels rotate. The right wheels have a smaller turning radius and slower speed compared to the left wheels. Only the spare tire on the car does not rotate. Precautions for using a spare tire: 1. Regularly check the air pressure of the spare tire. 2. Avoid placing the spare tire together with oil products to prevent corrosion. 3. It is best to install a non-full-size spare tire on a non-driving wheel and avoid driving long distances with it. Below is more information about spare tires: 1. A spare tire is a backup tire for a car, which can replace a flat or damaged tire to ensure safe driving. In terms of type, spare tires can be divided into full-size spare tires and non-full-size spare tires. 2. A full-size spare tire is the same as the original tire of the vehicle, while a non-full-size spare tire is smaller and narrower than the original tire. Due to lower manufacturing costs, non-full-size spare tires are generally only equipped on lower-priced vehicles. It is important to note that non-full-size spare tires are only for temporary use and should not be driven for long distances.

15

4

Share

How to Check if You Passed the Subject 2 Test?

How much engine oil does a BMW 5 Series 2.0T engine require?

Is It Illegal to Remove Rear Seats from a Five-Seat Sedan?

How many kilometers should antifreeze be replaced?

What are the differences between Michelin Primacy and Energy?

Does a New Plug-in Hybrid Vehicle Need to Be Charged?

Which tire does not rotate when the car turns right?

Which models use the Toyota 8A engine?

Do I need to replace my vehicle license?

What is the final action at the end of Subject 2?

What brand is alken tires?