How to Check if Tire Pressure is Normal?

1 Answers
DiTaylor
07/29/25 5:41pm
To check if tire pressure is normal, the simplest and most straightforward method is to use a tire pressure gauge for measurement. However, if a tire pressure gauge is not available, you can only rely on visual inspection. For most vehicle models, under normal tire pressure conditions, the number of tire treads in contact with the ground is 3 to 4. If more than 4 treads are in contact, it indicates that the tire pressure is too low. Strictly speaking, tire pressure refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and damage to the engine will lead to the end of the car's life. The tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the car's performance and power.
Was this review help?
14
3
Share
More Forum Discussions

What is a Compactor Truck?

Compactor truck is a type of refuse compactor vehicle. Below is more relevant information: 1. Introduction to Compactor Trucks: A compactor truck consists of a sealed garbage compartment, hydraulic system, and operating system. The entire vehicle is fully sealed, capable of self-compacting and self-dumping, with all wastewater generated during compression entering a dedicated sewage tank. This design effectively addresses the issue of secondary pollution during waste transportation, eliminating inconvenience to the public. Key components utilize imported parts, featuring advantages such as high pressure, excellent sealing, convenient operation, and safety. Optional rear bin tipper mechanism or waste bucket tipper mechanism can be equipped. 2. Features of Compactor Trucks: (1) Simplified collection method, transforming the messy appearance of urban streets lined with trash bins and preventing secondary pollution. (2) High compression ratio and large loading capacity, with maximum crushing pressure reaching 12 tons. The loading capacity is equivalent to two and a half times that of non-compacting waste trucks of the same tonnage. (3) Automated operation, employing a computer control system where all filling and discharging operations can be performed by a single driver. It offers two operation modes: full automatic and semi-automatic, not only reducing the labor intensity of sanitation workers but also significantly improving the working environment.
5
2
Share

Can the vehicle body sweep the line during a right-angle turn?

No, the vehicle must not sweep the line. Control the speed properly, align the right quarter of the front of the car with the right white line to enter the right-angle turn, then observe when the upper edge of the left front door handle coincides with the left white line of the right-angle bay and turn the steering wheel fully. Straighten the steering wheel when the car is aligned, ensuring the steering speed matches the vehicle speed. Tips for right-angle turns are as follows: 1. Tip one: Pass in first gear without accelerating, stay as close as possible to the right curb when entering the test area, and turn the steering wheel sharply to the left when the front curb is obscured by the hood until fully turned, then quickly straighten the wheel when the front of the car is aligned with the exit. 2. Tip two: Before entering the right-angle turn, drive slowly as far as possible from the turning point marker within the road lines. When the center of the small triangular window on the front window of the side near the turning point aligns with the turning point, turn the steering wheel fully to that side, then straighten the wheel when the front of the car is aligned. 3. Tip three: Drive with the right side of the car close to the outer right-angle line, and when the middle of the triangular windows on the left and right front doors aligns with the inner and outer right-angle lines, turn the steering wheel fully to the left or right, then straighten it when the car is aligned.
14
4
Share

How to reset the oil change reminder on a 2013 Ford Kuga?

Turn the key to the ON position without starting the engine. Simultaneously press and hold the brake and accelerator pedals. At this point, a series of English prompts will appear on the instrument cluster. Continue holding the accelerator and brake pedals until the English prompt flashes once, indicating that the maintenance reset is successful. You can then release the accelerator and brake pedals. Related details are as follows: 1. Ford Kuga: The Ford Kuga is an SUV under the Ford brand. On April 22, 2012, the all-new Ford Kuga made its Asian debut at the 2012 Beijing International Auto Show. Dubbed by Ford as the "smarter SUV," it features a luxurious and stylish exterior, a highly modern interior, and numerous leading high-tech configurations in its class. 2. Optimizations: The Ford Kuga inherits the deep expertise of over half a century of Ford SUV family development, design, manufacturing, and tuning. Building on this foundation, the Kuga has undergone comprehensive evolution, with a series of upgrades to its exterior and interior. The overall design is more sporty and fashionable, and the center console now includes a 10-inch LCD screen paired with a new internet-connected car intelligent system. The optimized rear seating space improves knee room for rear passengers, further enhancing ride comfort.
4
0
Share

How to Use a Reversing Radar?

To use a reversing radar, you need to start the engine and power up the vehicle's electronic systems. The specific steps for using a reversing radar are as follows: 1. Open the driver's side door of the car. 2. Press down on the car's brake pedal to prepare for starting the engine. 3. Turn the car's key to start the engine and let it idle. 4. The car's dashboard will light up, indicating that the vehicle's power is fully connected. 5. Press the reversing radar activation button located on the left side of the center console's combination switch. 6. Press the reversing radar activation button to turn on the reversing radar system.
10
4
Share

Why Do Windshield Wipers Make Squeaky Noises?

The following are the reasons why windshield wipers make squeaky noises: 1. Worn-out wiper blades: Wiper blades are made of rubber and will harden and wear out over time, especially in winter. If they no longer clean effectively, the simplest solution is to replace them. Generally, wiper blades should be replaced every one to two years. 2. Debris on the wiper blades: When the wipers are turned on, sharp noises may occur due to friction between the blades and the windshield. Check and remove any debris on or under the wiper blades to ensure they remain clean. 3. Incorrect wiper arm angle: This can cause the blades to bounce on the windshield, leading to noise. If the blades are in good condition, adjust the wiper arm angle so the blades are perpendicular to the windshield. You can use pliers wrapped in a cloth to gently bend the wiper arm for proper alignment. 4. Linkage mechanism deformation: Deformation of the linkage mechanism, motor issues, relay problems, or long-term wear and tear (rust, jamming, etc.) can also cause noise. If you've recently replaced the wiper blades, check for dirt or oil residue on the windshield. Clean the glass with a cleaning solution or try a new set of wiper blades.
7
5
Share

What to Do When Your Driver's License Exceeds Its Validity Period?

If your driver's license has been expired for less than one year, you can directly apply for a renewal at the local vehicle management office. If your driver's license has been expired for more than one year but less than three years, you will need to take the local theoretical test (Subject 1). Upon passing the test, you can proceed with the normal renewal process. If you fail, you must retake Subject 1 until you pass. If your driver's license has been expired for more than three years, it will be invalidated and can no longer be used. To obtain a new driver's license, you must reapply and pass all tests from Subject 1 to Subject 4. The required documents for driver's license renewal are as follows: Original and photocopy of ID card; Original driver's license; Three recent 1-inch color photos with white background; Application form for motor vehicle driver's license (available at the processing location, to be filled out by the agent if processed by a proxy); Medical examination certificate (issued by a local county-level or military-regiment-level medical institution or the vehicle management office's medical examination point); For non-local residents, original and photocopy of the local residence permit are also required.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.