How to Check if the Three-Way Catalytic Converter is Present?

What are the reasons for BYD DMi-EV limitation?

BYD DMi-EV limitation refers to the occasional dashboard alert of EV function limitation during driving, where the engine starts, and the system can resume normal operation after turning off and restarting the power, with the fault occurring irregularly. The following are the reasons for DMi-EV limitation: 1. Battery pack failure. 2. BMS failure. 3. Drive motor controller failure. 4. Related circuit failure. Here is a brief introduction about BYD Auto: BYD Auto, generally referring to BYD Company Limited, is headquartered in Shenzhen, Guangdong, China. It is a new technology private enterprise with three major industrial groups: IT, automobiles, and new energy.

17

1

Share

What causes the clunking sound when the car starts moving?

The clunking sound when the car starts moving is caused by friction between the brake pads and brake discs, which is normal and nothing for the owner to worry about. The vehicle's braking system consists of the master cylinder, vacuum booster, wheel cylinder, brake pads, and brake discs. When the brake pedal is pressed, the brake pads clamp onto the brake discs, converting kinetic energy into heat energy to slow down the car. The vacuum booster provides assistance when the brake pedal is pressed, making it easier for the driver to apply the brakes. Upon opening the engine hood, a black metal disc can be seen below the windshield on the driver's side - this is the vacuum booster. In front of the vacuum booster is the master cylinder, which has a reservoir for holding brake fluid.

20

4

Share

How to Remove the License Plate Fasteners?

Methods to remove the license plate fasteners: 1. Use an angle grinder to cut a straight slot on each screw cap of the license plate. Be sure to hold it steady while cutting to avoid damaging the plate. There are a total of 8 screw caps, and each one should be cut with a straight slot using the angle grinder. 2. Insert a flathead screwdriver into the straight slot cut by the angle grinder on the screw cap and pry it off. 3. After removing the screw caps, use a Phillips screwdriver to unscrew the bolts securing the license plate. Be careful to turn slowly to avoid stripping the bolts. The license plate fasteners are anti-theft fasteners and cannot be removed without tools. They are generally one-time use and cannot be reused once removed; new ones must be installed.

5

0

Share

What is the difference between BMW Li and BMW i?

L stands for large or long. Generally, imported and domestic non-lengthened versions are designated with i (gasoline direct injection). Li means long, indicating that the vehicle has an extended wheelbase. Below is more information about wheelbase: 1. Wheelbase is the distance between the centers of the front and rear axles of a vehicle, measured along the same side between two adjacent wheels and perpendicular to the vehicle's longitudinal symmetry plane. 2. The length of the wheelbase directly affects the overall length of the car, thereby influencing the internal space. Ordinary and mid-size sedans usually have longer wheelbases, resulting in relatively more rear-seat space.

15

5

Share

How much engine oil should be added to the Chery Arrizo 5?

Adding 3.8 liters of engine oil provides the best protection for the Chery Arrizo 5's engine. Here's more information about adding engine oil to the Chery Arrizo: 1. The factory-recommended oil for the Arrizo 5 is SM-grade 10W-40. As an economical model, semi-synthetic oil is a better choice. 2. Whether to upgrade to full synthetic oil depends on personal financial capability. The Arrizo 5's engine doesn't have specific brand requirements for oil, as long as it meets the specifications. If the local temperature is lower, it's advisable to switch to 5W-40 grade oil.

20

5

Share

What suspension does the Mercedes-Benz GLB use?

The Mercedes-Benz GLB uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear. Most vehicles use MacPherson strut suspension for the front because it is cost-effective, simple in structure, and takes up little space. The MacPherson strut suspension has only one L-shaped control arm, which hardly occupies any space in the engine compartment. The Mercedes-Benz GLB is a compact SUV with a 5-door, 5-seat configuration. Its body dimensions are 4638 mm in length, 1834 mm in width, and 1687 mm in height, with a wheelbase of 2829 mm. The GLB is powered by a 1.3T turbocharged engine paired with a 7-speed dual-clutch transmission.

3

0

Share

How to Check if the Three-Way Catalytic Converter is Present?

What are the reasons for BYD DMi-EV limitation?

What causes the clunking sound when the car starts moving?

How to Remove the License Plate Fasteners?

What is the difference between BMW Li and BMW i?

How much engine oil should be added to the Chery Arrizo 5?

What suspension does the Mercedes-Benz GLB use?

Do I Need to Replace a Tire with a Nail Puncture?

Where is the appropriate place to apply for ETC?

What is the Difference Between Turbocharged and Naturally Aspirated Engines?

How Often Should the Gear Oil Be Changed for a Sail?