How to check if the radiator is low on water in the new Sylphy?

2 Answers
MacMiles
07/24/25 3:11am
Methods to check if the radiator is low on water in the new Sylphy: 1. Observe the coolant warning light on the car dashboard. If it lights up, it indicates that the radiator is low on water. 2. Open the engine compartment when the car is cold and check if the coolant level is sufficient. There are MAX and MIN level marks on the side of the coolant reservoir. If the level is below the MIN mark when the car is cold, add coolant accordingly, using the marks on the reservoir as a guide. Here are some related details: 1. The car engine must be properly cooled in high-temperature working conditions to maintain an optimal operating temperature, ensuring good performance, durability, and meeting exhaust emission requirements. 2. The water in the car radiator should generally be replaced every two years or every 30,000-40,000 kilometers. Vehicles with high usage frequency should consider replacing it earlier. During the period before the antifreeze coolant is due for replacement, if the coolant level is found to be below the MIN mark (the normal coolant level should be between MIN and MAX), it should be replenished promptly.
Was this review help?
4
2
Share
ZoeDella
08/10/25 10:48pm
Checking the coolant level in the new Sylphy is actually quite important. I remember when I was younger driving a similar model, insufficient coolant could easily lead to engine overheating and major repairs. Nowadays, checking the new Sylphy is very convenient. First, ensure the engine is turned off and cooled for one or two hours, then open the hood and locate the translucent plastic reservoir on the right side, which is marked with MIN and MAX level lines. When the engine is cold, the fluid level should be between these two marks; if it's below MIN, it indicates a coolant shortage, and you should promptly add the manufacturer-recommended coolant—avoid using tap water to prevent freezing and rust. Additionally, developing a habit of checking monthly can prevent unexpected breakdowns and save on repair costs. A friend of mine ended up with engine damage and a repair bill of over ten thousand yuan due to neglecting this check.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How many body colors does the Yuan EV have?

The Yuan EV new energy vehicle comes in a total of 9 body colors, which are Crystal White, Cool White & Black, Sky Blue, Trendy Green & White, Vibrant Orange, France Red, Elegant Blue & White, Titanium Gray, and Dazzling Red & Black. Here are some related details: 1. BYD's future new models will achieve a high level of aesthetic appeal and originality in their exterior design. It's worth mentioning that the Yuan also features a dual-waistline design on its side profile, and the 'C' pillar design no longer feels 'stiff' as in previous models. 2. The powertrain consists of a 1.5L naturally aspirated engine and two electric motors, with one motor installed at the front axle and the other at the rear axle to achieve four-wheel drive. In terms of transmission, BYD's self-produced 6-speed DCT dual-clutch transmission will be its first choice. In pure electric mode, the maximum range can also reach 70km.
16
4
Share

Can the car still be driven if it's shaking?

Normally, a car should run smoothly without significant shaking when idling or driving. If noticeable shaking is felt but the warning light is not on, you can continue driving at a lower speed and head to a repair shop as soon as possible to diagnose the cause of the shaking. However, if the car shakes violently, makes unusual noises, and the warning light comes on, you should stop immediately and call for assistance. Below are the reasons for car shaking: 1. Shaking during startup is mainly due to insufficient fuel combustion, resulting in inadequate power. 2. Causes of idle shaking include severe engine carbon buildup, ignition system issues, unstable oil pressure, and aging engine components. 3. The most common reasons for high-speed shaking are tire-related issues, such as incorrect tire pressure, abnormal tire wear, rim deformation, shock absorber failure, tire imbalance, and significant wheel alignment deviations.
11
0
Share

How to Determine if the Clutch Switch is Faulty?

The clutch switch malfunction can cause abnormal vehicle operation. Here are the criteria for determining a faulty clutch switch: 1. Abnormal engine RPM: Severe wear and slippage occur first. When starting on an uphill slope, the engine RPM is high but lacks power. In gears 3, 4, and 5, there is a noticeable jerk when releasing the throttle, all of which indicate a faulty switch. 2. Severe shaking when releasing the clutch at startup: If only the clutch disc is replaced without changing the pressure plate, the new disc and old plate can easily wear out the clutch disc. 3. Obvious abnormalities: The pressure plate may have grooves worn by the old disc. Lack of lubrication can lead to damage and noise. A faulty release bearing makes the clutch pedal feel heavier. 4. Insufficient power: A faulty clutch switch mainly manifests as noticeably insufficient power during rapid acceleration, vehicle shaking at startup, difficulty in shifting gears, and increased fuel consumption.
19
3
Share

What are the reasons for the light not working?

The interior dome light not working may be caused by a blown fuse or a faulty battery, and it is necessary to check the wiring of the interior light. Below is more information about the car dome light: 1. Dome light introduction: The dome light is generally installed in the driver's compartment or on the ceiling inside the car, serving as a lighting fixture for the driver's compartment. The dome light emits white light, with most lampshades made of transparent plastic, and the bulb power is usually 5~8W. 2. Components of the automotive lighting system: The automotive lighting system is one of the essential systems for safe driving. It mainly includes "external lighting fixtures, internal lighting fixtures, external signal fixtures, internal signal fixtures, etc." Automotive lighting fixtures, based on their installation position and function, include: "headlights, fog lights, license plate lights, instrument lights, dome lights, work lights."
5
3
Share

What brand of engine oil is suitable for Mazda CX4?

Mazda CX4 requires specialized 0W20 engine oil. As long as the oil grade is consistent, any brand of engine oil can be used. Here are specific details about Mazda CX4: 1. Mazda CX4 is a mass-produced model derived from the "KOERU" concept car, positioned as a compact coupe SUV, and produced by FAW Mazda. 2. In terms of appearance, it adopts Mazda's KODO design, aligning with the lifestyle of today's youth who pursue technology but value quality and practicality. Below is extended information about Mazda CX4 engine oil: 1. For long-lasting engine oil performance, Mobil lubricants can be used. 2. If strong cleaning capability is needed, such as for turbocharged engines that are prone to carbon deposits during high-speed operation, Shell lubricants are recommended. 3. For lubricants with strong oil film toughness, Castrol is advocated.
13
2
Share

Where is the air conditioning filter of Chery A3 located?

The air conditioning filter of Chery A3 is located under the windshield water deflector. Relevant details are as follows: 1. If the filter is dirty, clean it by blowing compressed air from the opposite side. Hold the air gun about 5cm away from the filter and blow at a pressure of 500kPa for approximately 2 minutes. The air conditioning filter is prone to accumulating a lot of dust; blowing away the loose dust with compressed air is sufficient. Never wash it with water, as this can easily damage it. 2. When the car is running with the air conditioning on, it draws in external air into the cabin. However, the air contains various particles such as dust, pollen, soot, grinding particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. Without the air conditioning filter, these particles can enter the cabin, not only polluting the car's air conditioning system and reducing the performance of the cooling system but also causing allergic reactions, lung damage, irritation from ozone, and the influence of odors, all of which can affect driving safety.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.