How to Check if the Exhaust Valve is Faulty?

1 Answers
Timothy
07/29/25 10:12pm
Methods to check if a car's exhaust valve is faulty include: 1. Blue smoke from the exhaust; 2. Severe suction phenomenon when opening the oil filler cap. The professional term for the exhaust valve is the pressure control valve or oil-water separator. The exhaust valve is installed between the compressor outlet and the condenser inlet, and its function is to improve the heat transfer effect in the condenser and evaporator through separation. The working principle of the exhaust valve is: high-pressure gas from the compressor enters the guide vanes of the exhaust valve, flows spirally along the guide vanes, and separates the lubricating oil from the working gas by centrifugal force and gravity, leaving it along the inner wall of the cylinder.
Was this review help?
20
5
Share
More Forum Discussions

What is the fuel consumption of the Honda City?

The average fuel consumption of the City (city + highway) is approximately 6.9L. Methods to reduce fuel consumption: Maintain a steady speed: Control your speed while driving and avoid sudden braking; Avoid opening windows at high speeds: Opening windows at high speeds increases fuel consumption; Regularly check tire pressure: Both under-inflated and over-inflated tires can increase fuel consumption, so check tire pressure regularly to ensure it is correct; Pay attention to transmission maintenance: Always use the correct transmission fluid for your vehicle. Transmission fluid not only lubricates but also helps transmit torque, so it should be replaced regularly. Introduction to the Honda City: Powertrain: The Honda City is equipped with a 1.5L naturally aspirated engine, delivering a maximum output of 131 horsepower, paired with either a 5-speed manual or a CVT transmission. Exterior: The new model features the latest family design language, with bold chrome accents on the front grille that blend naturally with the headlights. The grille is decorated with a honeycomb pattern for a more sporty effect.
19
0
Share

How Does a Car Air Conditioner Provide Cooling and Heating?

Car air conditioning systems operate based on the following principle: They output control signals according to the temperature inside the vehicle, evaporator temperature, engine coolant temperature, and other relevant switch signals detected by various sensors. These signals control the operational states of components such as the radiator fan, condenser fan, compressor clutch, blower motor, and air control motor to achieve automatic regulation of the cabin temperature. Composition and functions of a car air conditioning system: The system consists of a refrigeration system, heating system, air purification device, and control system. Its purpose is to adjust and maintain the temperature, humidity, air cleanliness, and airflow within the passenger compartment at optimal levels, providing occupants with a comfortable environment, reducing travel fatigue, creating favorable working conditions for the driver, and ensuring driving safety.
12
1
Share

What is the correct way to operate the clutch in Subject 2?

Subject 2 clutch operation method is as follows: 1. While driving: After getting in the car, first test the pedal feel by pressing it several times to locate the semi-engagement point. When lifting the clutch to this position, keep your foot steady and slowly release while maintaining control of the pedal position. This ensures smooth vehicle start or reverse movement. 2. When stopping: First determine the parking spot, lift the accelerator pedal in advance, turn on the right turn signal, and simultaneously press the brake pedal with gradually increasing force. When the vehicle slows down sufficiently, depress the clutch and control the brake pedal to stop at the designated parking space.
2
2
Share

Is it okay to park an automatic car in neutral with the handbrake on?

It is acceptable to park an automatic car in neutral with the handbrake on instead of shifting to P (Park). Here are detailed explanations of the different gear positions in an automatic transmission: 1. P (Park) is the parking gear: When the gear selector is in P, the transmission is in neutral internally, but the output shaft is mechanically locked. This means the car will remain stationary even without applying the brakes, and it is typically used for long-term parking. The car must be completely stationary before shifting into P, and the handbrake must be engaged. When parking on a slope, always engage the handbrake first before shifting into P. 2. R (Reverse) is the reverse gear: When the gear selector is in R, the transmission's output shaft rotates in the opposite direction to the engine, allowing the car to move backward. The car must be completely stationary before shifting into R. 3. N (Neutral) is the neutral gear: When the gear selector is in N, the gears inside the transmission are freewheeling, and the clutch is disengaged, minimizing the load on the transmission. N is generally used for short stops, such as waiting at a traffic light, or when the car is being towed. 4. D (Drive) is the driving gear: When the gear selector is in D, the transmission automatically shifts between the lowest and highest gears based on factors like vehicle speed and throttle opening, following preset shifting patterns. In most driving situations, D is the appropriate gear to use.
9
5
Share

What is didar tire?

didar is Dida tire, which is a non-three-guarantee tire produced by Zhongce Rubber Group Co., Ltd. The following is the relevant content introduction: 1. Tire: A tire is a circular elastic rubber product assembled on various vehicles or machinery to roll on the ground. It is installed on a metal rim to support the vehicle body, buffer external impacts, achieve contact with the road surface, and ensure the driving performance of the vehicle. 2. The maintenance methods of tires include: (1) Regularly check tire pressure. (2) Remove debris from the tread. (3) Check the wear condition of the tire and replace it in time according to the wear condition.
13
2
Share

What are the precautions for learning to drive in winter?

Precautions for learning to drive in winter are as follows: 1. Clean the windshield before practice: Before practicing, clean the car's windshield and rearview mirrors to avoid obstructed vision during practice due to blurry rearview mirrors or windshield. 2. Warm up the car adequately before practice: In winter, it is necessary to warm up the car properly; otherwise, abnormal engine wear may occur, affecting both the practice results and the engine's lifespan. 3. Reduce speed and maintain steady steering: Winter driving practice roads may be slippery, with reduced friction between tires and the ground. Therefore, it is essential to control the speed and maintain steady steering during practice.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.