How to Check if ETC is Successfully Activated?

What are the differences between Michelin Primacy 4 and 3st tires?

1. Different drainage performance: Michelin Primacy 4 features a new tread design through Evergrip technology, providing over 50% more drainage space compared to 3st, resulting in excellent drainage that significantly reduces hydroplaning. 2. Different rubber compound: Compared to 3st, Michelin Primacy 4 adopts a new tread design and new rubber compound, improving both wet braking performance and rolling resistance for both new and worn tires. 3. Different safety performance: Thanks to its new rubber compound, Michelin Primacy 4 demonstrates outstanding braking performance, particularly excelling in wet braking. Official data shows that Primacy 4 outperforms 3st by a full 2.4m in wet braking distance.

12

5

Share

What Does a Differential Lock Mean?

In fact, the principle of a differential lock is to control the speed difference between the left and right wheels or the front and rear axles within a certain range or to completely synchronize them. Why do wheels rotate at different speeds? Because when a car turns, the turning radius of the inner wheel and the outer wheel differs by almost the width of the car. The distances they travel are different. At this point, an inter-wheel differential is needed to distribute power to the wheels while allowing them to rotate at different speeds. Similarly, there is also a speed difference between the front and rear axles. The differential ensures that the wheels do not interfere with each other on roads with good traction. However, on slippery surfaces, unpaved roads, or racetracks, the differential is not advantageous as it helps the slipping wheel lose power. This is when we need a differential lock to limit the speed difference between the wheels or axles to a certain range or to completely lock them. For example, in rugged SUV models, we can engage the rear/center/front differential locks to maximize tire traction and navigate off-road conditions. However, it's important to note that differential locks should not be engaged on roads with good traction, as this can severely damage the vehicle's drivetrain or cause rollovers. In sports cars and urban SUVs, differential locks are usually of the limited-slip type, which allows a certain speed difference between the wheels but prevents the slipping wheel or axle from spinning excessively. Of course, the multi-plate clutch structure can overheat during high-intensity use. Now, do you understand what a differential lock means?

16

4

Share

How to Operate the Gear Shift of the Lynk & Co 03?

The Lynk & Co 03 uses an electronic gear shift, which can be operated by gently pushing the gear lever. Below is some relevant information about the Lynk & Co 03: 1. Model Brand: The Lynk & Co 03 is a model under the Lynk & Co brand. The exterior dimensions of the Lynk & Co 03 are 4639mm and 4692mm in length, 1840mm in width, 1472mm and 1461mm in height, with a wheelbase of 2730mm. 2. Powertrain: The Lynk & Co 03 has strong power, featuring three turbocharged engines: a low-power 1.5L turbocharged engine, a high-power 1.5L turbocharged engine, and a 2.0L turbocharged engine.

5

1

Share

Does a car need to undergo an on-site inspection in its sixth year?

New cars require an on-site inspection in their sixth year. Here are the specific details about vehicle on-site inspections: 1. Six-year exemption for new cars: For the first six years, cars do not need to undergo an on-site inspection at a vehicle inspection station. However, owners must still conduct a periodic check every two years, submit relevant documents such as compulsory traffic accident insurance certificates and vehicle and vessel tax, and collect the annual inspection label. 2. Vehicle annual inspection time regulations: Small and micro non-commercial vehicles must be inspected every two years within the first six years. Those that meet the exemption criteria can directly apply for the inspection label. Starting from November 20, 2020, non-commercial small and micro passenger vehicles (excluding minivans) older than six years but less than ten years have their inspection cycle relaxed from once a year to once every two years. This means private cars only need to undergo two on-site inspections within ten years, specifically in the sixth and eighth years.

10

4

Share

What to do if the license plate is lost? How to reapply and what procedures are required?

The vehicle does not need to be present. Just prepare the required documents for license plate reapplication and go to the Vehicle Management Office. What is the Vehicle Management Office? Let me explain. The Vehicle Management Office, officially known as the Vehicle Administration Office, is primarily responsible for handling vehicle registration, modification, transfer, mortgage, and deregistration. 1. Vehicle registration certificate 2. Original ID card of the vehicle owner and a copy 3. "Motor Vehicle License Plate Application Form" (available at the Vehicle Management Office) 4. If the vehicle is owned by a company and the license plate is stolen, the organization code certificate must also be provided. The reapplication process is relatively simple: 1. First, fill out the Motor Vehicle License Plate Application Form. 2. Submit the required physical documents at the service window. 3. Pay the fees for the new license plate and temporary license plate. 4. Receive the temporary license plate. 5. Choose to pick up the new license plate in person or have it delivered via Postal EMS. Additionally, the new license plate will have the same number as your original one, and your vehicle registration certificate can still be used. What to do if the license plate is lost? How to reapply and what procedures are required? Do you understand now?

2

4

Share

When will Shanghai implement China 6 emission standards?

Shanghai has announced that it will implement the China 6b emission standard in advance starting from July 1, 2019. The specific details are as follows: 1. From July 1, 2019: Light-duty vehicles sold and registered in the city must meet the China 6b standard requirements. 2. For vehicles that meet the China 5 (Phase II) emission standard and were sold with a unified motor vehicle sales invoice issued before July 1, 2019 (excluding that day): (1) They can still be registered after July 1. (2) China 5 (Phase II) emission standard vehicles that have completed transfer-out registration procedures at the original vehicle registration authority and are intended to be transferred to Shanghai can still be registered after July 1.

16

4

Share

How to Check if ETC is Successfully Activated?

What are the differences between Michelin Primacy 4 and 3st tires?

What Does a Differential Lock Mean?

How to Operate the Gear Shift of the Lynk & Co 03?

Does a car need to undergo an on-site inspection in its sixth year?

What to do if the license plate is lost? How to reapply and what procedures are required?

When will Shanghai implement China 6 emission standards?

How to Handle an Overdue Driver's License?

What is the process for renewing a driver's license at the DMV?

Why Does the Steering Make a Clicking Sound? Do You Know?

Is a Right Turn on Red Light Considered Running a Red Light? How to Handle It?