How to Check if a Car Meets China 6 Emission Standards When Buying?

1 Answers
GabrielAnn
07/30/25 12:33am
Methods to determine a vehicle's emission standards: 1. Vehicle Conformity Certificate: When purchasing a car, be sure to ask the salesperson for the vehicle's relevant documents and certificates. The Vehicle Conformity Certificate clearly states the vehicle's emission standards. Although it may not explicitly mention whether it's China 5 or China 6, the emission standard can be clearly determined from this information. 2. Environmental Information Vehicle List: As the name suggests, this document details the vehicle's environmental impact, including its exhaust emission standards. It directly and clearly indicates the emission stage of the vehicle—whether it's China 5 or China 6. 3. Vehicle Qualification Certificate: The vehicle's relevant qualification certificates will clearly specify the emission standards.
Was this review help?
18
3
Share
More Forum Discussions

How Many Types of Brake Fluid Are There for Cars?

Automotive brake fluids are divided into three types: alcohol-based, mineral oil-based, and synthetic. Among these, alcohol-based and mineral oil-based fluids have been phased out, and the brake fluids available on the market today are synthetic. Alcohol-based brake fluid is formulated from low-carbon alcohols and castor oil. In cold regions, a mixture of 34% castor oil, 13% glycerol (glycerin), and 53% ethanol can still ensure normal braking performance at around -35 degrees Celsius. Mineral oil-based brake fluid is made from refined light diesel fractions with the addition of thickeners and other additives. This type of brake fluid has better temperature adaptability than alcohol-based fluids, with an operational temperature range of -70 to 150 degrees Celsius. However, since it has a swelling effect on natural rubber, all rubber cups and hoses in the braking system should be replaced with oil-resistant rubber components before using this fluid to avoid corrosion and brake failure. Synthetic brake fluid is artificially synthesized and primarily composed of polyethers, water-soluble polyesters, silicone oils, etc., with the addition of lubricants and additives. It offers excellent performance and can operate at temperatures exceeding 200 degrees Celsius. It has minimal corrosive effects on rubber and metal, making it suitable for high-speed, high-power, heavy-load, and frequently braking vehicles. As a result, it has become the most widely used type of brake fluid today.
4
3
Share

What is the emission standard for the 2010 CR-V?

The 2010 Honda CR-V's exhaust emission standard is China IV (National IV). Honda CR-V models after 2014 generally comply with the China V (National V) emission standard. CR-V advantages: Features a stylish and dynamic exterior design with smooth, rounded yet sporty lines; improved materials and craftsmanship, well-equipped, powerful performance, flexible handling, and relatively high cost performance. CR-V space: Overall spacious and comfortable driving and passenger space with no noticeable tightness in head or legroom; abundant and practical interior storage space; seats are well-padded and comfortable, with slightly adjustable rear seats for more practicality on long trips. CR-V handling: Comfortable and flexible handling, clear gear shifts, smooth transitions, providing a car-like driving experience; responsive throttle; good steering wheel feel but lacks precision in direction; wide tires offer excellent grip; solid chassis but with a relatively low ground clearance, resulting in poor off-road capability; overly soft suspension leads to subpar high-speed stability. CR-V performance: Equipped with retuned 2.0L and 2.4L engines. The 2.4L engine delivers robust power, quick acceleration, and easy overtaking; the 2.0L engine is weaker, with slower starts and acceleration.
5
5
Share

What are the BMW naturally aspirated engines?

BMW naturally aspirated engines include the S85, S54B32, N52 engine (including N52B25 and N52B30), S65B40, etc. The S85 engine is a 5.0-liter V10 engine installed in the M5 and M6. Below is an introduction to the N52 engine: BMW's N52 engine (including N52B25 and N52B30) is a glorious engine series, which is an inline-six cylinder engine, hailed as one of the best inline engines in the world and one of the best inline engines in history. To reduce weight, the N52 engine was the first to adopt a magnesium-aluminum engine, and it is also the last generation of civilian magnesium-aluminum engines. The characteristics of the N52 engine include an aluminum-magnesium alloy cylinder block and composite crankcase, second-generation Valvetronic, a three-stage variable valve device, and a dual camshaft variable valve timing system. There are many models equipped with the N52 engine, such as the E90's 325i/330i, E60's 525i/530i, E65's 730i, E70's X5 30i, etc.
14
2
Share

What letters are on the Phaeton?

The letter on the rear of the Volkswagen Phaeton is 'Phaeton'. This letter originates from the Roman goddess Fides, symbolizing oath and faith. The Phaeton is a top-tier luxury sedan produced by Volkswagen AG of Germany. Officially launched into mass production in 2002, it stands as Volkswagen's most premium sedan model, primarily competing with rivals such as the Mercedes-Benz S-Class, BMW 7 Series, and Audi A8. For Volkswagen, this vehicle holds immense significance as it represents the brand's first full-size luxury sedan. The Volkswagen Phaeton is equipped with an engine delivering a maximum power output of 331 kW and peak torque of 560 N·m. It comes paired with a 5-speed manual/automatic transmission. Contrary to its understated exterior that often leads observers to initially mistake it for a Passant, stepping inside reveals a strikingly upscale ambiance. The meticulously crafted interior design elevates the car's premium aura.
8
1
Share

What does the transmission gear ratio table mean?

Transmission gear ratio table refers to the gear transmission ratio of the main reducer in the automobile drive axle, which is equal to the ratio of the rotational angular velocity of the drive shaft to the rotational angular velocity of the axle half-shaft, and also equal to the ratio of their rotational speeds. Automobile transmission ratio, also known as gear ratio, refers to the ratio of the rotational speeds of the two transmission mechanisms before and after the transmission device in the automobile transmission system. There are two types of transmission ratios in the automobile transmission system, namely the gear ratio of the main reducer and the gear ratio of the transmission. The maximum transmission ratio of the automobile transmission is the total transmission ratio of the transmission system when the automobile is in first gear. Since the transmission ratio of the main reducer is fixed, and usually the automobile does not have a transfer case or wheel-side reducer, it is only necessary to determine the first gear transmission ratio. If the transmission ratio of the automobile transmission is too small, the automobile will work under heavy load, with poor acceleration performance, and noise and vibration may occur. If the transmission ratio of the automobile transmission is too large, the fuel economy will be poor, and the engine noise at high speed will be loud. In daily use of the transmission, the following points should be noted: Do not fail to change the transmission oil for a long time. Long-term failure to change the transmission oil will cause damage to bearings, housing, and other components in the transmission; Avoid prolonged coasting in neutral. When driving a manual transmission model, many "experienced drivers" will use the operation of coasting in neutral, but for automatic transmission models, coasting in neutral will cause the automatic transmission to overheat, and a certain impact will occur when shifting back to D gear; Do not shift into D/R gear before the vehicle comes to a complete stop. Many drivers, in order to show their "smooth" operation, will directly shift into reverse gear before the vehicle comes to a complete stop, which will cause high damage to the gears in the transmission, and over time, it may lead to gear grinding and other faults; Do not frequently climb steep slopes in D gear. When facing some steep slopes, automatic transmission vehicles often overheat due to high load or shift up too early, resulting in insufficient climbing power. In this case, the manual mode can be used to limit the low gear or the sports mode to protect the transmission; Do not tow the vehicle over long distances. When an automatic transmission vehicle breaks down, a flatbed tow truck should be used to move the vehicle onto the tow board when it is in N gear, and towing ropes or other methods should not be used to directly tow the vehicle.
14
3
Share

How to Adjust the Lavida Audio System for Optimal Performance?

The original audio system of the Volkswagen Lavida can be adjusted by setting the treble to +1, midrange to 0, and bass to +1~+2. If you are sensitive to sound field requirements, you can move the front-rear balance one notch forward. It is important not to increase the bass excessively, as excessive low-frequency signals and dynamics can affect the lifespan of the speakers. More details are as follows: 1. Volkswagen series car speakers are generally 6.5 inches in size, and the main distinction between speakers is based on voltage. Car speakers typically operate at 12V. However, since multiple speakers working together draw a larger current, cars are usually equipped with speaker relays. 2. The Lavida comes with eight built-in speakers. The quality of sound effects is not determined by the number of speakers. Generally, high-end cars have more speakers than ordinary models. The installation position of the speakers often affects the sound quality of the car audio system. The same pair of speakers can produce different effects depending on their installation position. Therefore, the installation positions of speakers in mid-to-high-end cars are determined after various tests. 3. Car audio refers to the sound system installed in the vehicle. The system can be called an audio system only if it meets the basic condition of having the function to reproduce sound. Its anti-interference technology involves using choke coils connected in series between the power supply and the audio system to filter out interference from the power line, thereby reducing external noise interference. 4. Careful maintenance of the audio system can effectively extend the lifespan of the laser head and ensure high-quality music playback over the long term. For car CD audio systems, the most important aspect to pay attention to is dust prevention. The laser head is the most expensive and vulnerable component in a CD player. Although car audio systems are designed with dust prevention in mind, special attention is still required due to varying road conditions.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.