···
Log in / Register

How to Check for Inventory Cars?

1 Answers
LeLucas
07/28/25 1:54pm
Methods to check for inventory cars include: 1. Check the vehicle nameplate; 2. Inspect tire wear and manufacturing date; 3. Examine whether the inner wall of the exhaust pipe is clean; 4. Look for dust in the engine compartment, check if components are deformed, discolored, neatly arranged, or show signs of removal; 5. Inspect the vehicle's rubber parts for aging or detachment; 6. Check the foot pedals inside the car for wear or excessive dust in the gaps; 7. Observe the gaps in the front and rear bumpers, body gaps, and door gaps, open the doors to check for color differences between the interior and exterior paint; 8. Ensure the paint on the lower edge of the door frame is intact. Inventory cars refer to vehicles that have been in stock for more than 6 months without being sold.
Was this review help?
17
3
Share
More Forum Discussions

Is it necessary to replace all the coolant pipes if one is leaking?

Coolant pipes must be replaced if they are leaking because the hoses are subjected to high temperatures, and temporary repairs with glue are prone to failure. Here are some key points about coolant: 1. Function: The full name of coolant should be antifreeze coolant, which is a type of cooling liquid containing special additives. It is mainly used in liquid-cooled engine cooling systems and offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. 2. Types: Coolant is generally categorized into three types: ethanol-water, glycerol-water, and ethylene glycol-water. The most commonly used automotive coolant on the market is the ethylene glycol-based type.
18
4
Share

What is the maximum power of the Enclave GX engine?

The maximum power of the Enclave GX engine is 121 kilowatts, with a maximum torque of 240 Newton meters. This is a 1.3-liter turbocharged three-cylinder engine, with the maximum power achieved at 5600 revolutions per minute and the maximum torque available between 1500 to 4000 revolutions per minute. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The front-wheel-drive version of the Enclave GX is equipped with a CVT transmission, while the all-wheel-drive version uses a 9-speed automatic transmission. The front suspension of the Enclave GX employs a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension. The Enclave GX is a compact SUV, with dimensions of 4463 millimeters in length, 1813 millimeters in width, and 1642 millimeters in height, and a wheelbase of 2640 millimeters.
6
5
Share

Are the Rear Suspensions of the Alphard and Vellfire the Same?

The rear suspensions of the Alphard and Vellfire are the same. Taking the 2019 Alphard and 2019 Vellfire as examples, both models use a double-wishbone independent suspension. The double-wishbone independent suspension is a very advanced type of suspension, typically found only in some high-end models or vehicles that emphasize handling and comfort. Car suspensions are divided into two main categories: independent suspensions and non-independent suspensions. The Alphard has a body length of 4975mm, width of 1850mm, height of 1890mm, and a wheelbase of 3000mm. The Vellfire has a body length of 4975mm, width of 1850mm, height of 1890mm, and a wheelbase of 3000mm, making it an MPV model.
18
3
Share

How many cylinders does the Honda CR-V engine have?

Honda CR-V uses a four-cylinder engine. The Honda CR-V is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 1.5-liter turbocharged engine produces 193 horsepower and 243 Nm of maximum torque. The engine's maximum power is achieved at 5,600 rpm, and the maximum torque is available between 2,000 to 5,000 rpm. It features VTEC technology and direct fuel injection, with an aluminum cylinder head and block. The 2.0-liter naturally aspirated engine delivers 146 horsepower and 175 Nm of maximum torque. The engine's maximum power is achieved at 6,200 rpm, and the maximum torque is available at 4,000 rpm. It incorporates i-VTEC technology and multi-point fuel injection, with an aluminum cylinder head and block. The Honda CR-V is a compact SUV from Honda, with a wheelbase of 2,661 mm. Its dimensions are 4,621 mm in length, 1,855 mm in width, and 1,679 mm in height. The front suspension uses a MacPherson strut setup, while the rear suspension employs a multi-link independent suspension.
14
0
Share

Does the BMW 3 Series GT have a three-cylinder engine?

BMW 3 Series GT does not have a three-cylinder engine. All models of this car are basically equipped with four-cylinder engines. The BMW 3 Series GT is equipped with two engines in total, one is a low-power version of the 2.0-liter turbocharged engine, and the other is a high-power version of the 2.0-liter turbocharged engine. The BMW 3 Series GT is a new model launched by BMW at the Geneva Motor Show, and it is the second hatchback-style sedan after the BMW 5 Series GT. The body dimensions are 4824mm in length, 1828mm in width, and 1508mm in height, with a wheelbase of 2920mm. The BMW 3 Series GT offers four models with three power options: 320i, 328i, and 335i, namely the 320i Leading Edition, 320i Style Design Package, 328i Style Design Package, and 335i Style Design Package.
12
5
Share

Where to Add Coolant in BYD F0?

BYD F0 adds antifreeze at the radiator cap, which is the yellow cap. Coolant, the full name should be antifreeze coolant, meaning coolant with antifreeze function. Antifreeze can prevent the coolant from freezing and cracking the radiator or damaging the engine cylinder block during cold seasons when the car is parked. The method and function of adding antifreeze are as follows: Method of Adding Antifreeze: First, unscrew the cap on the radiator. After draining the water in the radiator, tighten the bolt to completely empty the water in the radiator. Use a screwdriver or an appropriate wrench to loosen the small drain screw on the thermostat. Add antifreeze to the radiator until water flows from the small drain screw on the thermostat, then tighten the small drain screw on the thermostat. Continue adding antifreeze to the radiator cap until it can't take any more. Then, remove the rubber air vent tube next to the radiator cap. Start the engine, generally revving the throttle to above 3000 RPM until the radiator fan starts to cool, then release the throttle and let the engine idle. Continue adding antifreeze to the radiator cap until water flows from the air vent tube, let it flow for about 3-5 seconds, then reinsert the air vent tube. Rev the throttle to above 3000 RPM again, then release the throttle and let the engine idle. Continue adding antifreeze to the radiator cap until it can't take any more. Function of Antifreeze: It has antifreeze, cooling, anti-corrosion, and anti-scaling functions. In cold climates, it ensures the car can operate normally without freezing. In high-temperature conditions, it can cool down the high-temperature operating engine.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.