How to Check Driving School Registration Information?

How to Reset the Maintenance Light on JAC Yueyue?

The method to reset the maintenance light on JAC Yueyue is as follows: 1. Turn off the ignition, press and hold the button at the lower right of the instrument panel; 2. Turn the ignition to the position where all dashboard lights are on, and you will notice the small wrench symbol on the dashboard stops flashing; 3. Release the button, then press the button at the lower left of the instrument panel, and you will see the small wrench symbol disappear, indicating the reset is complete; 4. Alternatively, you can visit a 4S shop where the technician will use a specialized diagnostic tool to perform the reset. The dashboard displays a "SERVICE" indicator, signaling the need for maintenance. After the maintenance is completed, the technician will use the tool to reset the maintenance light.

8

4

Share

What is the treatment method for yellowing headlight covers?

Use white Headlight-Lens-Restorer to wipe, apply transparent paste on a dry cloth, and then scrub vigorously. At this point, the car headlights should have become completely transparent, so there is no need to use sandpaper to polish them. Sandpaper polishing is only required for headlights with severe yellowing and oxidation. The following introduces the repair method for yellowing headlight covers: 1. First, spray a small amount of degreaser on the surface of the headlight cover, then wipe the headlight surface with a damp cloth until the moisture or dirt is completely removed. 2. Use pre-prepared single-sided adhesive tape to stick around the outline of the headlight (green part), and cover the outer outline of the headlight with newspaper or similar material where the tape is applied. 3. Next, begin the repair work. First, spray the repair agent on the headlight part, keeping a distance of 15-20cm from the headlight to prevent splashing of the repair liquid during spraying.

6

5

Share

What type of engine oil is used in the Volkswagen Bora 1.6?

The Volkswagen Bora 1.6 model uses semi-synthetic engine oil with the specification SM5W-40. Here are more details about the new Volkswagen Bora: 1. The new Volkswagen Bora is equipped with two engines, one is a 1.4-liter turbocharged engine, and the other is a 1.5-liter naturally aspirated engine. 2. The 1.4-liter turbocharged engine has a maximum power of 110 kW and a maximum torque of 250 Nm. It can output the maximum power at 5000 to 6000 rpm and the maximum torque at 1750 to 3000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 3. The 1.5-liter naturally aspirated engine has a maximum power of 83 kW and a maximum torque of 145 Nm. It can output the maximum power at 6000 rpm and the maximum torque at 3900 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. 4. The front suspension of this car uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.

20

3

Share

How to Modify the Haval H2 to Look Better?

There are only two color combinations that look good when modifying the entire Haval H2. For a black-based car, one modification method is to pair it with orange, using orange for both the rims and body decals. Below are the specific details of the Haval H2: 1. The front face of the Haval H2 features the new Haval family grille, with a large chrome-plated air intake grille design, a prominent HAVAL logo, and a large-mouth front grille. The grille is decorated with chrome trim, giving the front of the car a full and imposing look. 2. The interior of the Haval H2 adopts a completely new design, with a large amount of metal-textured decorations and high-gloss wood trim added to the cabin, significantly enhancing the visual appeal. The new dashboard is very stylish, featuring a color display in the center; it supports GPS navigation functionality.

7

3

Share

What does it mean when the BYD charging fault light flashes alternately?

BYD charging fault light flashing alternately is due to: loose connections or poor contact in the charging pile circuit, or a short circuit. Taking the 2011 BYD F6 as an example, it is a mid-size car with body dimensions of: length 4846mm, width 1822mm, height 1465mm, wheelbase 2740mm, fuel tank capacity 65L, and curb weight 1435kg. The 2011 BYD F6 features double-wishbone independent front suspension and five-link independent rear suspension. It is equipped with a 1.8L naturally aspirated engine producing maximum power of 122PS (90kW) and maximum torque of 160Nm, paired with a 5-speed manual transmission.

9

0

Share

What does the BYD P0300 fault code mean?

BYD P0300 fault code refers to: Engine detects multi-cylinder misfire. Taking the 2021 BYD Tang as an example, it is a medium-sized SUV with body dimensions of: length 4870mm, width 1940mm, height 1720mm, wheelbase 2820mm, fuel tank capacity 68 liters, and curb weight 1895kg. The 2021 BYD Tang features MacPherson strut front suspension and multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine delivering maximum power of 230 horsepower, maximum torque of 350 N·m, and maximum power output of 169 kW, paired with a 6-speed automatic transmission.

15

5

Share

How to Check Driving School Registration Information?

How to Reset the Maintenance Light on JAC Yueyue?

What is the treatment method for yellowing headlight covers?

What type of engine oil is used in the Volkswagen Bora 1.6?

How to Modify the Haval H2 to Look Better?

What does it mean when the BYD charging fault light flashes alternately?

What does the BYD P0300 fault code mean?

What is the 0-100 km/h acceleration time of the Audi S4?

How Many Years Can a Camry Last?

How to Use Reference Points for Parallel Parking?

Has the Chevrolet Malibu Been Discontinued?