How to Check Driver's License Test Scores?

What is the wading depth of the Sagitar?

The maximum wading depth of the Sagitar is 310mm. The wading depth of the Sagitar is determined by the height of the vehicle's chassis, which is the ground clearance listed in the vehicle's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Sagitar is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion; Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration; On roads prone to waterlogging, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to estimate the water depth before deciding whether to proceed; Be aware of your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.

3

0

Share

What does the 'A' button next to the electronic handbrake mean?

Electronic handbrake next to the A button is the automatic parking system. After turning on this switch, when the vehicle is braked to a stop during driving, even if the brake is released, the vehicle will not continue to move. It will only resume driving when the accelerator is pressed. If you want to turn it off, you have to manually switch it off. The automatic parking system is a technical application that can achieve automatic handbrake function while the car is running. This technology allows drivers to avoid prolonged braking when the vehicle stops, and prevents unnecessary sliding when the automatic electronic parking brake is activated. The working principle of the automatic parking system lies in the brake management system's control of the four-wheel brakes through the extended function of the electronic handbrake.

16

3

Share

What does DS mean in an automatic transmission?

Automatic transmission DS meaning: The D gear is the drive gear. When the gearshift lever is moved to this position, the transmission automatically shifts up and down within the engine speed range, with the shift point determined by engine load, the driver's driving style, and vehicle speed. The S gear is the sport mode of the D gear, providing more powerful power output. In this mode, the transmission can shift freely, but the shifting is delayed. Automatic transmission gears are generally represented by the letters P, R, N, D, S, and L, which stand for Park, Reverse, Neutral, Drive, Sport mode, and Low gear, respectively. The R gear is the reverse gear, used for driving the vehicle backward; the P gear is engaged after parking to prevent the vehicle from rolling backward; the N gear is the neutral gear, often used in conjunction with the handbrake when waiting at traffic lights; the L gear is the low gear, which can be engaged when going downhill.

18

1

Share

Should I still press the brake when shifting to N gear at a red light with an automatic transmission?

When shifting to N gear at a red light with an automatic transmission, you should press the brake if you're worried about the car rolling. For longer red lights, it's advisable to shift to N gear and engage the handbrake without pressing the brake pedal. If the red light wait is less than 30 seconds, you can stay in D gear without shifting, just press the brake, and release it to accelerate when the light turns green. There's no wrong choice between shifting to N or D gear for temporary stops; it depends on personal preference. Temporarily stopping in D gear with the brake pressed won't harm the car because the torque converter in the transmission is equipped with a reaction wheel that includes a one-way clutch, designed to amplify the torque from the engine crankshaft. It remains stationary at idle and only engages when the engine speed increases.

3

5

Share

How to Reset the Maintenance Light on a Chevrolet Cruze?

Method to reset the maintenance light on a Chevrolet Cruze: First, power on the vehicle, then use the MENU button and the scroll adjustment wheel to navigate the dashboard display to the oil life interface. Press and hold the reset button on the dashboard for a few seconds, and the maintenance light will reset. The Chevrolet Cruze is a compact sedan developed by General Motors and serves as a benchmark model for Chevrolet. The dimensions of this car are 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. The Chevrolet Cruze is equipped with two engine options: a 1.5L and a 1.4T, delivering maximum power outputs of 114 horsepower and 150 horsepower, respectively.

10

3

Share

How to reset the wrench icon on Tiggo 5?

Tiggo 5 wrench icon reset method: There is a button below the engine tachometer on the dashboard. Press and hold this button, then turn the ignition switch to ON position. After 3 seconds, release the button to reset the wrench icon. The wrench icon is a maintenance reminder light. Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the automobile, also known as automobile servicing. Modern vehicle maintenance mainly includes the maintenance scope of engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.

5

Share

How to Check Driver's License Test Scores?

What is the wading depth of the Sagitar?

What does the 'A' button next to the electronic handbrake mean?

What does DS mean in an automatic transmission?

Should I still press the brake when shifting to N gear at a red light with an automatic transmission?

How to Reset the Maintenance Light on a Chevrolet Cruze?

How to reset the wrench icon on Tiggo 5?

What are the differences between Dongfeng Nissan and Zhengzhou Nissan?

Why is the tire pressure low in one tire?

What is considered a normal engine idle speed?

Where is the one-key start button for Audi Q5?