How to Check Driver's License Status?

Where to Use Turn Signals in Subject 2 Driving Test?

There are a total of 6 instances where turn signals are required in Subject 2: 1. When starting the vehicle, turn on the left turn signal. 2. When starting on a slope, turn on the left turn signal. 3. During parallel parking, turn on the right turn signal when the vehicle passes the parking space and stops 30 cm from the curb, preparing to reverse. 4. Before shifting into reverse gear during parallel parking, turn on the left turn signal because the steering wheel will be turned fully to the right, causing the front of the vehicle to shift left. 5. Before exiting the parking space during parallel parking, shift into drive and turn on the left turn signal, turning it off promptly after exiting. 6. When entering a right-angle turn area, turn on the left turn signal and turn it off promptly after completing the turn. Penalties for incorrect use of turn signals are as follows: - Failing to use or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. - Turning the steering wheel within less than 3 seconds of activating the turn signal before starting, turning, changing lanes, overtaking, or parking results in a 10-point deduction. The full score for Subject 2 is 100 points, with evaluation criteria including fail, 20-point deduction, 10-point deduction, and 5-point deduction. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium passenger vehicles, and large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required. For small vehicles (C1, C2), the test includes five mandatory items: reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item: highway toll card collection. For large vehicles (A1, A2, A3, B1, B2), the test includes: stake test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, and simulations for highways, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

19

3

Share

Is the Subject 4 Test Unlimited?

Subject 4 can be taken unlimited times, but only within the validity period of the study certificate. If you fail the first attempt of the driver's license Subject 4 test on the day, you can retake it once on the spot. If you fail the second time, you need to reschedule the Subject 4 test. The road safety and civilized driving test has no limit on the number of attempts. The five-attempt restriction only applies to the road driving skills tests for Subject 2 and Subject 3, while the safety and civilized driving knowledge test (Subject 4) has no limit on the number of attempts. You just need to pass the test within the three-year validity period of the driving skills test certificate. There is no limit on the number of rescheduling attempts. However, if you fail the retest five times, the previous subject tests will be invalidated. If you fail the first attempt of the driver's license Subject 4 test on the day, you can retake it once on the spot. If you fail the second time, you need to reschedule the Subject 4 test. Failing Subject 4 does not require retaking the previously passed subjects (Subject 1, Subject 2, Subject 3). The driving school will schedule the retest, and usually, a retest fee is required for each attempt. The three subjects are scheduled for tests in order, and each subject can be tested once with one retest opportunity after scheduling. If you do not take the retest or fail the retest, you need to reschedule the test.

9

1

Share

Where is the best place to apply for ETC?

ETC can be processed at bank branches, online service points, or highway service areas. To apply, you need to provide the original and photocopy of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle license should include the page stamped with the most recent annual inspection. Additionally, a bank debit card or credit card application form is needed to bind with the ETC card. After obtaining the card, you can go to the designated bank branch to receive and install the ETC onboard device for free, with no charges during the process. Applicants must be between 18 and 60 years old and own a vehicle in their name. Documents required for company vehicles: Introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the agent; original vehicle license; the vehicle that needs ETC. You can also apply online, for example, by using mobile apps like WeChat or Alipay to search for ETC and follow the prompts to complete the application, or directly search for ETC application and proceed as instructed. Since various banks have their own online services and sections, they have launched online ETC application services for the convenience of vehicle owners, allowing applications to be made without leaving home. Here are some precautions for installing ETC: Do not obstruct the view; it's best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to go to an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device.

4

0

Share

What are the differences between China VI and China V vehicles?

The differences between China V and China VI emission standards are as follows: Different emission standards: China VI emission standards are more than 30% stricter than China V. Excluding the influence of operating conditions and testing, gasoline vehicles' carbon monoxide emissions are reduced by 50%, total hydrocarbons and non-methane hydrocarbons emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: China V standards were implemented nationwide on January 1, 2017. China VI standards have been implemented since July 1, 2019. Different principles: In China V, diesel and gasoline vehicles had different emission standards, but China VI adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. Different issuing departments: China V standards were issued by the Ministry of Environmental Protection. China VI standards were issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China V is represented by "V," while China VI is represented by "VI." Different monitoring requirements for plug-in hybrid electric vehicles (PHEVs): Compared to China V, China VI has improved monitoring requirements for PHEVs, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulations. China V standards are as follows: Gasoline vehicles must not emit more than 1,000 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM (particulate matter) per kilometer driven. China VI has two standards: China VIa and China VIb, as follows: China VIa standards: Gasoline vehicles must not emit more than 700 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 mg of PM per kilometer driven. China VIb standards: Gasoline vehicles must not emit more than 500 mg of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 mg of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 mg of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 mg of PM per kilometer driven. Affected by China VI emission policies, although China V vehicles can still be used normally without travel or license plate restrictions, their resale value will be significantly impacted. For truck owners, if they purchase a truck on loan for cargo transport, the depreciation of the vehicle after repaying the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China VI vehicles, which have a longer service life and more road rights, are more advantageous.

8

3

Share

Can a Driver's License Be Laminated a Second Time?

Driver's licenses can be laminated a second time, but the supplementary page cannot be laminated. The main function of the original copy is to record the driver's basic information and the types of vehicles they are licensed to drive. To prevent these key details from wearing out, the original copy is laminated. The supplementary page primarily serves to record reminders and requires annotations, hence it cannot be laminated. If a driver's license expires within one year, the holder can apply for a renewal at the vehicle management office. If the license has been expired for more than one year but less than three years, the holder must pass the subject one exam before they can renew it normally. If the license has been expired for more than three years, it will be revoked.

15

3

Share

What is the reason for no sound when connecting mobile phone Bluetooth to car Bluetooth?

The reasons for no sound when connecting mobile phone Bluetooth to car Bluetooth for playing music are: 1. Mobile phone: The call volume of the mobile phone is not turned on. 2. Car navigation system: The volume of the car navigation system is not turned on, just turn it on. 3. Car Bluetooth: The car Bluetooth is not connected to the mobile phone at all. Notes: 1. Device issues: First, ensure that device issues are ruled out. 2. Bluetooth settings: Make sure that the mobile phone's Bluetooth settings are set to visible to everyone or searchable or open for detection, and also ensure that the car system has the Bluetooth function turned on and is in a visible state.

1

Share

How to Check Driver's License Status?

Where to Use Turn Signals in Subject 2 Driving Test?

Is the Subject 4 Test Unlimited?

Where is the best place to apply for ETC?

What are the differences between China VI and China V vehicles?

Can a Driver's License Be Laminated a Second Time?

What is the reason for no sound when connecting mobile phone Bluetooth to car Bluetooth?

How many liters of engine oil should be added to the BMW 2 Series Gran Tourer?

How often should a car be waxed for maintenance?

What to Do If You Can't Find Your Old Driver's License When Renewing It?

Where is the cruise control on the Cayenne?